[Freeswitch-users] Errors during compiling from today's 1.2.stable build
Ken Rice
krice at freeswitch.org
Thu Nov 14 04:53:48 MSK 2013
This has been resolved... The entire patch set for that commit were reverted
and removed... If you are still having problems, you need to do a full
rebuild
For v1.2.stable branch
# git clean fdx && git reset ‹hard origin/v1.2.stable && git pull &&
./bootstrap.sh && ./configure && make
Or
For master branch
# git clean fdx && git reset ‹hard origin/master && git pull &&
./bootstrap.sh && ./configure && make
On 11/13/13 8:21 PM, "bedgar at vseinc.com" <bedgar at vseinc.com> wrote:
> Something must have changed in the bootstrap or configure process that is
> causing a problem when symbolic links exist in the path to the local source
> directory. If I make everything absolute paths I can build. This problem
> begins with commit cef8007d1cdd3cfffbe9e51854ed840154ed6f06 shown above.
>
> I hope that this can be addressed.
>
> Brian
>
>
> From: freeswitch-users-bounces at lists.freeswitch.org
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Mario G
> Sent: Monday, November 11, 2013 3:12 PM
> To: FreeSWITCH Users Help
> Subject: Re: [Freeswitch-users] Errors during compiling from today's
> 1.2.stable build
>
> FYI, did not fix it here with fresh git clone.
>
> Mario
>
>
>
> On Nov 11, 2013, at 12:01 PM, bedgar at vseinc.com wrote:
>
>
>> Ken,
>>
>>
>>
>> I started everything from scratch and removed the configure option that you
>> deleted from the wiki. Opened JIRA FS-5960.
>>
>>
>>
>> Brian
>>
>>
>>
>> From: freeswitch-users-bounces at lists.freeswitch.org
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Ken Rice
>> Sent: Monday, November 11, 2013 1:59 PM
>> To: FreeSWITCH Users Help
>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>> 1.2.stable build
>>
>>
>> Did you re-bootstrap and configure after git pull?
>>
>> On 11/11/13 2:42 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com> "
>> <bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com> > wrote:
>>>
>>> Anthony,
>>>
>>> As I am still encountering this identical problem on multiple servers up to
>>> commit 9aeaebe17bba4f64b54a2ccc8541eb361890232d I will do as Ken suggested
>>> and open a Jira and include logs of my bootstrap, configure, and make.
>>>
>>> Brian
>>>
>>> From: freeswitch-users-bounces at lists.freeswitch.org
>>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>>> [mailto:freeswitch-users-bounces at lists.freeswitch.org
>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> ] On Behalf Of
>>> Anthony Minessale
>>> Sent: Monday, November 11, 2013 2:12 PM
>>> To: FreeSWITCH Users Help
>>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>>> 1.2.stable build
>>>
>>>
>>> Yah I already said I figured it out and fixed it on saturday by reverting a
>>> commit that was made in this same thread.
>>>
>>> I guess that's what happens when they get too long.....
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Mon, Nov 11, 2013 at 12:24 PM, Mario G <mario_fs at mgtech.com
>>> <x-msg://48/mario_fs@mgtech.com> > wrote:
>>>>
>>>> See FS-5956, I think it's the same problem.
>>>>
>>>> Mario G
>>>>
>>>>
>>>>
>>>> On Nov 11, 2013, at 8:14 AM, <bedgar at vseinc.com
>>>> <x-msg://48/bedgar@vseinc.com> > wrote:
>>>>
>>>>
>>>>> Anthony,
>>>>>
>>>>>
>>>>>
>>>>> Sorry that this is a pretty long thread. I was finally able to pull a
>>>>> server from production to rerun the build using commit
>>>>> 60f3a9aec1b82155284366b4ecfda61785ec7ce9. I am still encountering the
>>>>> issue.
>>>>>
>>>>>
>>>>>
>>>>> /bin/sh: fork: retry: Resource temporarily unavailable
>>>>>
>>>>> /bin/sh: fork: Resource temporarily unavailable
>>>>>
>>>>> make[680]: *** [/home/fsbuild/src/freeswitch/libs/apr-util/libaprutil-1.la
>>>>> <http://libaprutil-1.la <http://libaprutil-1.la> > ] Error 254
>>>>>
>>>>> make[679]: *** [core] Error 2
>>>>>
>>>>> make[678]: *** [/home/fsbuild/src/freeswitch/libs/apr-util/libaprutil-1.la
>>>>> <http://libaprutil-1.la <http://libaprutil-1.la> > ] Error 2 - (repeats
>>>>> over and over until dying)
>>>>>
>>>>>
>>>>>
>>>>> Brian
>>>>>
>>>>>
>>>>>
>>>>> From: freeswitch-users-bounces at lists.freeswitch.org
>>>>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org
>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> >
>>>>> [mailto:freeswitch- <mailto:freeswitch->
>>>>> users-bounces at lists.freeswitch.org
>>>>> <x-msg://48/users-bounces@lists.freeswitch.org>
>>>>> <mailto:users-bounces at lists.freeswitch.org
>>>>> <mailto:users-bounces at lists.freeswitch.org> > ] On Behalf Of Anthony
>>>>> Minessale
>>>>> Sent: Saturday, November 9, 2013 1:13 PM
>>>>> To: FreeSWITCH Users Help
>>>>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>>>>> 1.2.stable build
>>>>>
>>>>>
>>>>>
>>>>> Try latest, a recent patch someone made to the configure stuff seems to
>>>>> have triggered make recursion loop.
>>>>>
>>>>> I reverted it.
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Nov 9, 2013 at 12:05 PM, Anthony Minessale
>>>>> <anthony.minessale at gmail.com <x-msg://48/anthony.minessale@gmail.com>
>>>>> <mailto:anthony.minessale at gmail.com <mailto:anthony.minessale at gmail.com> >
>>>>> > wrote:
>>>>>>
>>>>>>
>>>>>> This is a pretty long thread....
>>>>>>
>>>>>> The issue is something is spawning a ton of processes in the make and the
>>>>>> system can't handle it do to limitations of some sort.
>>>>>>
>>>>>> You should probably capture a full log of the build and look closely at
>>>>>> what is happening right before it starts having the problem.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Nov 8, 2013 at 11:51 PM, <bedgar at vseinc.com
>>>>>> <x-msg://48/bedgar@vseinc.com> <mailto:bedgar at vseinc.com
>>>>>> <mailto:bedgar at vseinc.com> > > wrote:
>>>>>>>
>>>>>>>
>>>>>>> Ken,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Okay. Will do. I will not leave the thread in a hangŠ
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Brian
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> From: freeswitch-users-bounces at lists.freeswitch.org
>>>>>>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>>>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org
>>>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> >
>>>>>>> [mailto:freeswitch-users-bounces at lists.freeswitch.org
>>>>>>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>>>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org
>>>>>>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> > ] On Behalf Of
>>>>>>> Ken Rice
>>>>>>> Sent: Friday, November 8, 2013 11:04 PM
>>>>>>>
>>>>>>>
>>>>>>> To: FreeSWITCH Users Help
>>>>>>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>>>>>>> 1.2.stable build
>>>>>>>
>>>>>>>
>>>>>>> There shouldn¹t be any impact... That particular flag was needed quite a
>>>>>>> while ago to avoid issues with stupidity in how ³Enterprise Linux²
>>>>>>> platforms like to link to all sorts of things and shouldn¹t really be
>>>>>>> needed (imho that is)
>>>>>>>
>>>>>>> I suspect something is wrong with that particular platform...
>>>>>>>
>>>>>>> If you continue having build problems and can replicate it on another
>>>>>>> box, please get a log of bootstrap.sh, configure and make output and
>>>>>>> open a jira
>>>>>>> Seehttp://wiki.freeswitch.org/wiki/Reporting_Bugs
>>>>>>> <http://wiki.freeswitch.org/wiki/Reporting_Bugs>
>>>>>>> <http://wiki.freeswitch.org/wiki/Reporting_Bugs
>>>>>>> <http://wiki.freeswitch.org/wiki/Reporting_Bugs> >
>>>>>>>
>>>>>>> On 11/8/13 11:51 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
>>>>>>> <http://bedgar@vseinc.com <http://bedgar@vseinc.com> > "
>>>>>>> <bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
>>>>>>> <http://bedgar@vseinc.com <http://bedgar@vseinc.com> > > wrote:
Ken,
What is the impact of remaking on an existing node¹s build without that
configure parameter?
I still have yet to run through the iterations. I did not use j. I am
very careful of adding options. The only other deviation I usually is
./devel-bootstrap which I did not use here.
I will post my results when possible.
Regards,
Brian
From:freeswitch-users-bounces at lists.freeswitch.org
<x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
<http://freeswitch-users-bounces@lists.freeswitch.org
<http://freeswitch-users-bounces@lists.freeswitch.org> >
[mailto:freeswitch-users-bounces at lists.freeswitch.org
<mailto:freeswitch-users-bounces at lists.freeswitch.org>
<mailto:freeswitch-users-bounces at lists.freeswitch.org
<mailto:freeswitch-users-bounces at lists.freeswitch.org> > ]On Behalf OfKen
Rice
Sent:Friday, November 8, 2013 10:24 PM
To:FreeSWITCH Users Help
Subject:Re: [Freeswitch-users] Errors during compiling from today's
1.2.stable build
Gaaahhh ok that¹s just wrong and I will remove that from the wiki... But
you have something else wrong it appears... I just build using the command
./bootstrap.sh && ./configure --without-pgsql && make
Without issue on a fully updated centos 6.4 x86_64 install...
Are you sure you arent doing something like make j?
On 11/8/13 11:00 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
<http://bedgar@vseinc.com <http://bedgar@vseinc.com> > " <bedgar at vseinc.com
<x-msg://48/bedgar@vseinc.com> <http://bedgar@vseinc.com
<http://bedgar@vseinc.com> > > wrote:
Ken,
This is based on the wiki which has been followed precisely since moving to
CentOS 6.x. Is this no longer valid? Is there a clarification needed in
the wiki?
https://wiki.freeswitch.org/wiki/Installation_Guide#CentOS_.26_RedHat_Enterp
rise_Linux
<https://wiki.freeswitch.org/wiki/Installation_Guide#CentOS_.26_RedHat_Enter
prise_Linux>
<https://wiki.freeswitch.org/wiki/Installation_Guide#CentOS_.26_RedHat_Enter
prise_Linux
<https://wiki.freeswitch.org/wiki/Installation_Guide#CentOS_.26_RedHat_Enter
prise_Linux> >
Release(es) 6 and Later
A change by Red Hat in RHEL 6 and later releases was to compile the kernel
to run tickless by default. As previously brought up on the mailing lists,
it is recommended that the kernel's tickless feature should be disabled for
optimum performance when running FreeSwitch under the newer operating
system's kernel. You can disable the tickless feature by appending nohz=off
to your boot options under GRUB. The GRUB start up configuration file is
located under /boot/grub or as /etc/grub.conf. Add it to the line beginning
with "kernel". This is also applicable to Fedora releases 8 and later.
Also, when using release 6 and later, make sure to configure with
"./configure --without-pgsql", this is to make sure that FreeSWITCH uses
it's own curl library, instead of the system provided, and that it doesn't
try to use the system provided postgresql libs. If using the system provided
versions linking errors will occur. Hopefully this will be auto detected in
a near future. Related Jira issues were: FS-3384, FS-3630, FS-3384 and
FS-3393.
In addition, FS may not behave 100% correctly in CentOS 6.x, please review
Jira issues: FS-4396, FS-4316, FS-4291
UPDATE: We have anecdotal evidence that CentOS 6.3 does not seem to have the
problems listed above. If you experience any of the above symptoms with
CentOS 6.3 please comment on the Jira cases listed.
Brian
From:freeswitch-users-bounces at lists.freeswitch.org
<x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
<http://freeswitch-users-bounces@lists.freeswitch.org
<http://freeswitch-users-bounces@lists.freeswitch.org> >
[mailto:freeswitch-users-bounces at lists.freeswitch.org
<mailto:freeswitch-users-bounces at lists.freeswitch.org>
<mailto:freeswitch-users-bounces at lists.freeswitch.org
<mailto:freeswitch-users-bounces at lists.freeswitch.org> > ]On Behalf OfKen
Rice
Sent:Friday, November 8, 2013 9:43 PM
To:FreeSWITCH Users Help
Subject:Re: [Freeswitch-users] Errors during compiling from today's
1.2.stable build
Why are you using ‹without-pgsql?
On 11/8/13 10:18 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
<http://bedgar@vseinc.com <http://bedgar@vseinc.com> > " <bedgar at vseinc.com
<x-msg://48/bedgar@vseinc.com> <http://bedgar@vseinc.com
<http://bedgar@vseinc.com> > > wrote:
>>
>>
>> Sorry, Ken:
>>
>> ./bootstrap.sh
>> ./configure --without-pgsql
>> make
>> sudo make install
>>
>> These are my standard orders and were also followed in this case.
>>
>> Brian
>>
>>
>> From: freeswitch-users-bounces at lists.freeswitch.org
>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>> <http://freeswitch-users-bounces@lists.freeswitch.org
>> <http://freeswitch-users-bounces@lists.freeswitch.org> >
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org>
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> > ] On Behalf Of Ken
>> Rice
>> Sent: Friday, November 8, 2013 9:02 PM
>> To: FreeSWITCH Users Help
>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>> 1.2.stable build
>>
>> What configure line are you using, I don¹t have any problems on cent 5 or 6
>> 32 and 64 bit versions
>>
>>
>> On 11/8/13 9:29 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
>> <http://bedgar@vseinc.com <http://bedgar@vseinc.com> > " <bedgar at vseinc.com
>> <x-msg://48/bedgar@vseinc.com> <http://bedgar@vseinc.com
>> <http://bedgar@vseinc.com> > > wrote:
>>
>> Ken and Anthony,
>>
>> Sorry for the repost as it did not stay in the thread
>>
>> This is on a physical server that was already successfully running 1.2.14.
>> It is CentOS 6.4.
>>
>> It was a fresh git to an empty directory.
>>
>> Only special thing was the configure requirement that I always do for
>> CentOS.
>>
>> Brian
>>
>>
>>
>> From: freeswitch-users-bounces at lists.freeswitch.org
>> <x-msg://48/freeswitch-users-bounces@lists.freeswitch.org>
>> <http://freeswitch-users-bounces@lists.freeswitch.org
>> <http://freeswitch-users-bounces@lists.freeswitch.org> >
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org>
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org
>> <mailto:freeswitch-users-bounces at lists.freeswitch.org> > ] On Behalf Of Ken
>> Rice
>> Sent: Friday, November 8, 2013 5:28 PM
>> To: FreeSWITCH Users Help
>> Subject: Re: [Freeswitch-users] Errors during compiling from today's
>> 1.2.stable build
>>
>> What platform is this on?
>>
>>
>> On 11/8/13 5:57 PM, "bedgar at vseinc.com <x-msg://48/bedgar@vseinc.com>
>> <http://bedgar@vseinc.com <http://bedgar@vseinc.com> > " <bedgar at vseinc.com
>> <x-msg://48/bedgar@vseinc.com> <http://bedgar@vseinc.com
>> <http://bedgar@vseinc.com> > > wrote:
>>
>> I had trouble building from a git of 1.2.stable this afternoon.
>>
>> bootstrap successful
>> configure successful
>> make not so good
>>
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>> /bin/sh: fork: retry: Resource temporarily unavailable
>>
>> Had to kill the make with Ctrl-C
>>
>> make[392]: ***
>> [/home/fsbuild/src/freeswitch/libs/apr-util/libaprutil-1.la<http://libaprutil
>> -1.la <http://libaprutil-1.la> > ] Interrupt
>> make[391]: *** [core] Interrupt
>>
>> rsync¹d from another server from a build that retrieved this morning and
>> successfully installed after I did a git clean -d -f x
>>
>> Successful - FreeSWITCH Version 1.2.14+git~20131108T143841Z~0339e80780~64bit
>> (git 0339e80 2013-11-08 14:38:41Z 64bit)
>>
>> Did another git of the stable build and still had the same error. Did
>> something get borked in stable today?
>>
>> Brian
>>
>>
>>
>>
>>
>>
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org <x-msg://48/consulting@freeswitch.org>
>> <http://consulting@freeswitch.org <http://consulting@freeswitch.org> >
>> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com>
>> <http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com> >
>>
>>
>> <> <
>> <> >
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org <http://www.freeswitch.org>
>> <http://www.freeswitch.org <http://www.freeswitch.org> >
>> http://wiki.freeswitch.org <http://wiki.freeswitch.org>
>> <http://wiki.freeswitch.org <http://wiki.freeswitch.org> >
>> http://www.cluecon.com <http://www.cluecon.com> <http://www.cluecon.com
>> <http://www.cluecon.com> >
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> <x-msg://48/FreeSWITCH-users@lists.freeswitch.org>
>> <http://FreeSWITCH-users@lists.freeswitch.org
>> <http://FreeSWITCH-users@lists.freeswitch.org> >
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>> <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>> <http://lists.freeswitch.org/mailman/options/freeswitch-users
>> <http://lists.freeswitch.org/mailman/options/freeswitch-users> >
>> http://www.freeswitch.org <http://www.freeswitch.org>
>> <http://www.freeswitch.org <http://www.freeswitch.org> >
>>
>>
>>>>>>>
>>
>>
>> --
>> Ken
>> http://www.FreeSWITCH.org
>> http://www.ClueCon.com
>> http://www.OSTAG.org
>> G+ ClueCon : http://fs0.us/cluecon-gplus
>> FB ClueCon : http://fs0.us/cluecon-fb
>> G+ FreeSwitch : http://fs0.us/freeswitch-gplus
>> FB FreeSWITCH : http://fs0.us/freeswitch-fb
>> Twitter : @FreeSWITCH_WIRE
>> irc.freenode.net #freeswitch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20131113/693417b8/attachment-0001.html
Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users
mailing list