[Freeswitch-users] Is FreeSwitch run on Windows 2008 R2 64?

[Peter Olsson]

You can disable them in modules.conf.xml - those modules doesn't build by
default on Windows (and I'm not sure they even build at all on Windows).
Anyway - it's just info in the log, it doesn't cause any problems.

If FreeSWITCH is running, I can't find another reason then a
software/hardware firewall blocking the traffic. Maybe you have an
antivirus with another firewall inside. Also, make sure that the Windows
service for the firewall is not disabled - since that will block all
traffic in 2008 R2. You can easily test the connection from another
computer by telneting to the IP of the server on port 5060, it should let
you connect.

/Peter


2013/6/26 Albert Nguyen <albert_nguyen16 at hotmail.com>

> Here are the errors that appeared
>
> 2013-06-26 18:56:11.708797 [CRIT] switch_loadable-module.c: 1383 Error
> Loading module C:/program files/FreeSWITCH/mod/mod_vp8.dll
> ** dll open error [1261]
> **
> 2013-06-26 18:56:11.708797 [CRIT] switch_loadable-module.c: 1383 Error
> Loading module C:/program files/FreeSWITCH/mod/mod_b64.dll
> ** dll open error [1261]
> **
>  I have installed the 64 bits msi copy from freeswitch website
>
>
>  ------------------------------
> Date: Wed, 26 Jun 2013 09:33:20 +0200
> From: peter at olssononline.se
> To: freeswitch-users at lists.freeswitch.org
> Subject: Re: [Freeswitch-users] Is FreeSwitch run on Windows 2008 R2 64?
>
> The most common problem is the built in Windows firewall that blocks the
> traffic.
>
>
> 2013/6/26 Albert Nguyen <albert_nguyen16 at hotmail.com>
>
>
> Hi Peter,
>
> Thanks for your email, yes it loaded fine but it doesn't work at all when
> other device trying to connect to it. Any idea?
>
> Regards,
>
> Albert
>  ------------------------------
> Date: Sat, 22 Jun 2013 09:44:16 +0200
> From: peter at olssononline.se
> To: freeswitch-users at lists.freeswitch.org
> Subject: Re: [Freeswitch-users] Is FreeSwitch run on Windows 2008 R2 64?
>
> Is the only problem that it reports loading errors for a couple of
> modules? FS should run just fine on any Windows platform, at least from XP
> and above.
>
> But it might be that it tries to load a module, that was not built into
> the MSI - but that's just an error in the log, FS should start just fine
> anyway.
>
> /Peter
>
>
> 2013/6/21 Albert Nguyen <albert_nguyen16 at hotmail.com>
>
>  Hi,
>
> I am trying to load freeswitch on to Windows 2008 R2 64 bit server but so
> far I can not get any windows versions of freeswitch to work on this os
> (latest 32 bits and 64 bits version from freeswitch web site). It give
> error message saying that it could not load the ..v8.dll and another dll
> file within the switch_loadable_module.c. Is Freeswitch not compatible to
> win2008R2 or am I missing something?
>
> Cheers,
>
> Albert
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services: consulting at freeswitch.org
> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel
> Communication Server  Official FreeSWITCH Sites
> http://www.freeswitch.org http://wiki.freeswitch.org
> http://www.cluecon.com FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services: consulting at freeswitch.org
> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel
> Communication Server  Official FreeSWITCH Sites
> http://www.freeswitch.org http://wiki.freeswitch.org
> http://www.cluecon.com FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130626/1f6869b3/attachment.html