[Freeswitch-users] strange behavior in setting origination_caller_id_number
Jun Sun
jsun at junsun.net
Tue Dec 31 22:39:59 MSK 2013
Thanks for the all the helping. Now I have beaten this issue to death.
I did a SIP tracing. Peter is right on money. My SIP provider does not like
"0000000000" to be caller id number. To be specific and to add confusion,
their server doesn't like if it is 10 zero's. (All other cases are fine,
e.g, 9 zero's!) Their server would return service not available . That is
why we see NORMAL_TEMPORARY_FAILURE.
It is good to know the world is still sane, except for the little 10 zero
quirk from IDT. :)
Cheers. And happy new year.
Jun
On Tue, Dec 31, 2013 at 9:44 AM, Sean Devoy <sdevoy at bizfocused.com> wrote:
> Your first “set” line has a typo:
>
> <action application="set"
> data="origination_caller_id_number=${outbound_calller_id_number"/>
>
> It is missing the closing “}” on ${outbound_calller_id_number". So
> origination_caller_id_number is not being set.
>
>
>
> I think that is why these fail:
>
> <!--action application="bridge"
> data="sofia/gateway/${default_gateway}/$1"/--> <== NOT WORK
> <!--action application="bridge" data="sofia/gateway/idt/$1"/--> <==
> NOT WORK
>
> As per the wiki, effective_caller_id_number cannot be set in an
> origination string, so this fails:
>
> <action application="bridge"
> data="{effective_caller_id_number=111111}sofia/gateway/${default_gateway}/$1"/>
> <== NOT WORK
>
>
>
> And this works because you are finally assigning a value to
> origination_caller_id_number:
>
> <!--action application="bridge"
> data="{origination_caller_id_number=111111}sofia/gateway/${default_gateway}/$1"/-->
> <== WORKS
>
>
>
> Use the LOG application to check your values before the bridge statement,
> like this:
>
> <action application="log" data="INFO origination_caller_id_number is $
> origination_caller_id_number "/>
>
>
>
> Hope that helps,
>
> Sean
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Jun Sun
> *Sent:* Monday, December 30, 2013 5:59 PM
>
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] strange behavior in setting
> origination_caller_id_number
>
>
>
> Switching to "{}" makes no difference here. See the updated rules below.
>
> This is driving me nuts because there is no way for me to set caller id
> dynamically (because I cannot do that inside the data field). Why would
> freeswitch ignore channel variable set? And why would it insist on
> origination_caller_id_number?
>
> <extension name="domestic.example.com">
> <condition field="${toll_allow}" expression="domestic"/>
> <condition field="destination_number" expression="^(\d{11})$">
> <action application="set"
> data="origination_caller_id_number=${outbound_calller_id_number"/>
> <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
> <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
> <!--action application="bridge"
> data="sofia/gateway/${default_gateway}/$1"/--> <== NOT WORK
> <!--action application="bridge" data="sofia/gateway/idt/$1"/--> <==
> NOT WORK
> <!--action application="bridge"
> data="{origination_caller_id_number=$${outbound_caller_id_number}}sofia/gateway/${default_gateway}/$1"/-->
> <== NOT WORK
> <action application="bridge"
> data="{effective_caller_id_number=111111}sofia/gateway/${default_gateway}/$1"/>
> <== NOT WORK
> <!--action application="bridge"
> data="{origination_caller_id_number=111111}sofia/gateway/${default_gateway}/$1"/-->
> <== WORKS
> <!--action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/${default_gateway}/$1"/-->
> <== WORKS
> </condition>
> </extension>
>
> IN the case when it does not work, I got NORMAL_TEMPORARY_FAILURE:
>
> 2013-12-30 22:53:12.876331 [NOTICE] sofia.c:6623 Hangup sofia/external/
> 15102991913 [CS_CONSUME_MEDIA] [NORMAL_TEMPORARY_FAILURE]
>
> Cheers.
>
> Jun
>
>
>
> On Mon, Dec 30, 2013 at 12:13 PM, Sean Devoy <sdevoy at bizfocused.com>
> wrote:
>
> I use {} and I am not familiar with [] in the bridge statement. Try,
>
> < action application="bridge"
> data="{effective_caller_id_number=111111}sofia/gateway/idt/$1" />
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Jun Sun
> *Sent:* Monday, December 30, 2013 1:46 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] strange behavior in setting
> origination_caller_id_number
>
>
>
> Any takers of this challenge? :)
>
>
>
> Jun
>
>
>
> On Sun, Dec 29, 2013 at 9:38 AM, Jun Sun <jsun at junsun.net> wrote:
>
>
> Sorry! The 2nd "NOT WORK" example was meant to show setting
> "effective_caller_id_number", not "origination_caller_id_number". So the
> correct dialplan is as follows.
>
>
>
> <extension name="domestic.example.com">
> <condition field="${toll_allow}" expression="domestic"/>
> <condition field="destination_number" expression="^(\d{11})$">
> <action application="set"
> data="origination_caller_id_number=11111111"/>
> <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
> <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
> <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
> <!--action application="bridge" data="sofia/gateway/idt/$1"/--> <===
> NOT WORK
>
> <!--action application="bridge"
> data="[effective_caller_id_number=111111]sofia/gateway/idt/$1"/--> <===
> NOT WORK
>
>
> <action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/> <===
> WORKS!!
> </condition>
> </extension>
>
> Cheers.
>
> Jun
>
>
>
> On 12/29/2013 9:25 AM, Jun Sun wrote:
>
>
> I have a very simple call plan to allow internal extension to call
> external PSTN numbers. See below.
>
> <extension name="domestic.example.com">
> <condition field="${toll_allow}" expression="domestic"/>
> <condition field="destination_number" expression="^(\d{11})$">
> <action application="set"
> data="origination_caller_id_number=11111111"/>
> <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
> <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
> <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
> <!--action application="bridge" data="sofia/gateway/idt/$1"/--> <===
> NOT WORK
> <!--action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/--> <===
> NOT WORK
> <action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/> <===
> WORKS!!
> </condition>
> </extension>
>
> There a couple of things strange here:
>
> 1. I have to put origination_caller_id_number inside data field of
> "bridge" application in order for the dialing out to happen. Why putting
> it outside as channel variable does not work?
>
> 2. Actually because bridge command is for leg-B, really it should be
> "effective_caller_id_number" not "origination_caller_id_number". Is that
> right?
>
> I'm using IDT express as SIP carrier. I don't know if they changed
> something or I changed configuration in freeswitch. Now it seems I have to
> set origination_caller_id_number if I want to use IDT for outbound calls.
>
> I'd really appreciate your help.
>
> Cheers.
>
> Jun
>
>
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20131231/c69fdc49/attachment-0001.html
Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users
mailing list