[Freeswitch-users] strange behavior in setting origination_caller_id_number

[Jun Sun]

Any takers of this challenge? :)

Jun


On Sun, Dec 29, 2013 at 9:38 AM, Jun Sun <jsun at junsun.net> wrote:

>
> Sorry! The 2nd "NOT WORK" example was meant to show setting
> "effective_caller_id_number", not "origination_caller_id_number". So the
> correct dialplan is as follows.
>
>
>  <extension name="domestic.example.com">
>     <condition field="${toll_allow}" expression="domestic"/>
>     <condition field="destination_number" expression="^(\d{11})$">
>       <action application="set"
> data="origination_caller_id_number=11111111"/>
>       <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>       <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>       <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
>       <!--action application="bridge" data="sofia/gateway/idt/$1"/-->   <===
> NOT WORK
>       <!--action application="bridge"
> data="[effective_caller_id_number=111111]sofia/gateway/idt/$1"/-->   <===
> NOT WORK
>
>       <action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/> <===
> WORKS!!
>     </condition>
>   </extension>
>
> Cheers.
>
> Jun
>
>
> On 12/29/2013 9:25 AM, Jun Sun wrote:
>
>
> I have a very simple call plan to allow internal extension to call
> external PSTN numbers. See below.
>
>  <extension name="domestic.example.com">
>     <condition field="${toll_allow}" expression="domestic"/>
>     <condition field="destination_number" expression="^(\d{11})$">
>       <action application="set"
> data="origination_caller_id_number=11111111"/>
>       <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>       <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>       <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
>       <!--action application="bridge" data="sofia/gateway/idt/$1"/-->   <===
> NOT WORK
>       <!--action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/-->   <===
> NOT WORK
>       <action application="bridge"
> data="[origination_caller_id_number=111111]sofia/gateway/idt/$1"/> <===
> WORKS!!
>     </condition>
>   </extension>
>
> There a couple of things strange here:
>
> 1. I have to put origination_caller_id_number inside data field of
> "bridge" application in order for the dialing out to happen.  Why putting
> it outside as channel variable does not work?
>
> 2. Actually because bridge command is for leg-B, really it should be
> "effective_caller_id_number" not "origination_caller_id_number".  Is that
> right?
>
> I'm using IDT express as SIP carrier. I don't know if they changed
> something or I changed configuration in freeswitch. Now it seems I have to
> set origination_caller_id_number if I want to use IDT for outbound calls.
>
> I'd really appreciate your help.
>
> Cheers.
>
> Jun
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20131230/ca212de5/attachment.html