[Freeswitch-users] Freetdm Channel utilization in order(ascending/descending)

[Vishal Kakkar]

[span wanpipe wp1]
trunk_type => e1
group=dialGrp1
b-channel => 2:1-15
b-channel => 2:17-31
d-channel => 2:16

[span wanpipe wp2]
trunk_type => e1
group=dialGrp1
b-channel => 1:1-15
b-channel => 1:17-31
d-channel => 1:16


freetdm/dialGrp1/*a*/xxxxx initiates call from channel 1 of span 2 i.e.
(2:1)

freetdm/dialGrp1/*A/*xxxxx initiates call from channel 31 of span 2 i.e.
(2:31)..  but i was expecting it to be 31st channel of Span1.

Also 2nd question in above config all calls are going through wp1(span2)
only.. even if i initiate more than 30 calls simultaneously.. no call goes
to wp2(span 1)

Can anyone please help how can i make ascending/descending channel
utilization using one single group across both above spans..

Thanks a lot..
FS Rocks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130409/045df626/attachment.html