[Freeswitch-users] Registering SIP Trunks to Freeswitch

Fri Sep 7 02:35:03 MSD 2012

No worries - it is indeed a total paradigm shift and things may seem
unusual. If you have a PBX registered with FreeSWITCH then from the FS
perspective it's a "user". Don't let the name "user" fool you - it's just a
label, and it's easier to write than "SIP registered endpoint."

So, if your trunk is registered then that means you've got an entry in
conf/directory/default/ that defines the "user". An example in there
already is 1000.xml, where the id="1000". So to route a call to that "user"
just do this:

<action application="bridge" data="user/1000"/>

That's it! FS does a lot of magic behind the scenes. So in the case of your
DID, you need to add a dialplan entry. I recommend making a copy of
conf/dialplan/default/00_inbound_did.xml and editing it to suit your needs.
Let's say that your DID is 8005551212 and that your PBX is registered as
user 1234. This dialplan entry would route an inbound DID call to your PBX:

<extension name="DID">
  <condition field="destination_number" expression="^\+?1?8005551212">
    <action application="bridge" data="user/1234"/>
  </condition>
</extension>

Note I added some regex magic to strip out optional leading + or 1.

Let us know how that works. Be sure to join IRC if you want to discuss it
in real time.
-MC

On Thu, Sep 6, 2012 at 12:09 PM, Matt Putnam <matt.putnam at lightspar.com>wrote:

> Sorry for the confusion I can really only equate it to asterisk as that’s
> what our current platform is. Essentially the problem is that if I have a
> PBX that has a trunk that is registered to freeswitch and a call is
> received for a DID  that is on that trunk I am currently unable to send
> that DID to the PBX. When the call is received on the PBX side it looks as
> if the call is for the trunk instead of the DID is should be for. So in the
> SIP invite instead of using lightspar1 at domain it would use 5551212 at domain.In asterisk this was simply accomplished by a dial statement of
> (SIP/5551212 at lightspar1) what I am looking for is that equivalent in
> freeswitch.****
>
> ** **
>
> Thanks,****
>
> Matt Putnam****
>
> matt.putnam at lightspar.com****
>
> ** **
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Brian Foster
> *Sent:* Thursday, September 06, 2012 10:48 AM
>
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Registering SIP Trunks to Freeswitch****
>
> ** **
>
> I'm confused. I've read your message about three times, still don't
> completely understand.****
>
> Brian Foster
> Endigo Computer LLC****
>
> Sent from a mobile device.****
>
> On Sep 6, 2012 10:44 AM, "Matt Putnam" <matt.putnam at lightspar.com> wrote:*
> ***
>
> Thanks for the Response Mike I am able to get the trunk registered the
> real issue I guess is passing calls to that trunk. As an example I have
> freeswitch1 for customers which has a trunk lightspar1 registered to my
> gateway freeswitch box. When a call is placed to a DID that is associated
> to freeswitch1 I can see the call in the logs but the destination number is
> lightspar1 not the original DID that was called. Is there a way to set the
> from field to use the DID called instead of the trunk name so instead of
> lightspar1 at blah it would send the invite with NPANXXXXXX at blah?****
>
>  ****
>
> Thanks,****
>
> Matt Putnam****
>
> matt.putnam at lightspar.com****
>
>  ****
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Michael
> Collins
> *Sent:* Wednesday, September 05, 2012 6:49 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Registering SIP Trunks to Freeswitch****
>
>  ****
>
> Hi Matt,
>
> Welcome to FreeSWITCH!
>
> If you want something to register with FreeSWITCH then simply add an entry
> in the user directory. Whether it's a "user" or a "trunk" really doesn't
> matter - it's just a SIP registration. Look in
> conf/directory/default/1000.xml (if using the example "vanilla"
> configuration) for a taste of what you need. Let us know if you have any
> other questions or join us in #freeswitch on irc.freenode.net.
>
> -MC (IRC:mercutioviz)****
>
> On Wed, Sep 5, 2012 at 3:21 PM, Matt Putnam <matt.putnam at lightspar.com>
> wrote:****
>
> This may have been asked before but my research hasn’t turned up any
> results. I am currently testing freeswitch as a replacement to our current
> asterisk gateways. I think I have the basics of ip based trunks down but I
> am running into an issue with trunks registering to the freeswitch box. In
> asterisk it was a fairly simple process of giving the trunk a username and
> password and setting it to dynamic to get it to register. What would be the
> equivalent in freeswitch that would allow me to have customer trunks
> register to the system? ****
>
>  ****
>
>  ****
>
> Thanks,****
>
> Matt Putnam****
>
>  ****
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org****
>
>
>
>
> --
> Michael S Collins
> Twitter: @mercutioviz
> http://www.FreeSWITCH.org
> http://www.ClueCon.com
> http://www.OSTAG.org****
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5251 - Release Date: 09/05/12*
> ***
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org****
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5252 - Release Date: 09/06/12*
> ***
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>

-- 
Michael S Collins
Twitter: @mercutioviz
http://www.FreeSWITCH.org
http://www.ClueCon.com
http://www.OSTAG.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120906/251a3025/attachment-0001.html 