[Freeswitch-users] Just starting

[Anthony Minessale]

look in dialplan/default.xml at Local_Extension

<condition field="destination_number" expression="^(10[01][0-9])$">

Change that regex to also cover your new extensions.

You may find some use on the wiki section on xml dialplan or possibly one
of our tech books.



On Fri, Nov 2, 2012 at 9:48 AM, Rob Boutin <rjb at contactbeep.com> wrote:

> Alright so my phones have ring tones and can place calls to the predefined
> extensions (1000 – 1020) but upon trying to call one another it always says
> “temporarily unavailable” there is no difference in the actual extension
> files between the working ones and the new ones I defined but the server
> doesn’t seem able to connect the calls from my new extensions to my other
> new extensions for some reason. ****
>
> ** **
>
> Any ideas on this would be very helpful, and I feel like whatever this is
> should be the last issue I face.****
>
> ** **
>
> ** **
>
> Thanks again,****
>
> RJB ****
>
> ** **
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Rob Boutin
> *Sent:* Friday, November 02, 2012 8:54 AM
>
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Just starting****
>
> ** **
>
> Thank you, ****
>
> ** **
>
> Using this I was able to realize the embarrassingly simple solution.****
>
> My XML editor at some point during my setup lost permission to change
> files in the FreeSWITCH folder and wasn’t throwing errors for some reason.
> ****
>
> ** **
>
> ** **
>
> Thanks again,****
>
> RJB****
>
> ** **
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [
> mailto:freeswitch-users-bounces at lists.freeswitch.org<freeswitch-users-bounces at lists.freeswitch.org>]
> *On Behalf Of *Vitalie Colosov
> *Sent:* Thursday, November 01, 2012 3:44 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Just starting****
>
> ** **
>
> If you could shutdown all devices and then capturing SIP Trace
> while bringing up the device with #300 (or any # except #301) using
> Wireshark, it will definitely add more info for investigation.****
>
> ** **
>
> 2012/11/1 Rob Boutin <rjb at contactbeep.com>****
>
> Hello,****
>
>  ****
>
> I am just starting out with FreeSWITCH and I am researching it for a
> project at work that will hopefully end up with full implementation of
> FreeSWITCH and had a few short questions as I am having difficulties
> getting it off the ground.****
>
>  ****
>
> I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system.
> ****
>
> My tiny test network of phones includes an xlite softphone on the windows
> machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone.  They are being
> routed with a simple Linksys Etherfast router.****
>
>  ****
>
> My issue is that only one phone at a time will ever be registered and able
> to make calls. I have four extensions configured with identical settings
> 300 – 303.  The peculiar thing is only the phone assigned to 301 will ever
> have a dial tone and be able to place calls.  It doesn’t matter which
> device I move 301 to it is only 301 that ever works.  I was hoping to get
> some light shed on this, as it is likely related to some simple setting I
> over looked and would like to continue with my research.****
>
>  ****
>
> Thanks in advance,****
>
> RJB****
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org****
>
> ** **
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>


-- 
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
googletalk:conf+888 at conference.freeswitch.org
pstn:+19193869900
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20121102/fc638e08/attachment-0001.html