[Freeswitch-users] freeswitch - sangoma CAS T1 - a101 configuration

copycall dave at copycall.com
Tue May 29 01:53:15 MSD 2012


moises,

thank you for your response.

the T1 linecard at the end of this call is CAS T1, with B8ZS, and ESF,
extended super frame, with E&M trunk signaling.

as i understand it, this is not robbed bit signaling, but a later variation
of it.

i will paste the sangoma linecard config, below:

########################################################################
#                       Sangoma Wanpipe                             #
#        Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script             #
#                             v2.39                                  #
#                     Sangoma Technologies Inc.                        #
#                        Copyright(c) 2009.                            #
########################################################################

Would you like to change FreeSWITCH Configuration Directory?
Default: /usr/local/freeswitch/conf
 1. NO
 2. YES
[1-2, ENTER='NO']:NO

Error: Invalid option, input an integer
[1-2, ENTER='NO']:1

---------------------------------------------
Configuring T1/E1 cards [A101/A102/A104/A108]
---------------------------------------------
A101 detected on slot:4 bus:3

-----------------------------------------------------------
Configuring port 1 on A101 slot:4 bus:3.
-----------------------------------------------------------

Select media type for AFT-A101 on port 1 [slot:4 bus:3 span:1]
 1. T1
 2. E1
 3. Unused
 4. Exit
[1-4]:1

Configuring port 1 on AFT-A101 as: T1, coding:B8ZS, framing:ESF.
 1. YES - Keep these settings
 2. NO  - Configure line coding and framing
[1-2, ENTER='YES']:YES

Error: Invalid option, input an integer
[1-2, ENTER='YES']:1

Select clock for AFT-A101 on port 1 [slot:4 bus:3 span:1]
 1. NORMAL
 2. MASTER
[1-2]:1

Select Switchtype for AFT-A101 on port 1 [slot:4 bus:3 span:1]
 1. National
 2. Nortel DMS100
 3. Lucent 5ESS
 4. Lucent 4ESS
[1-4]:1

Select signalling type for AFT-A101 on port 1 [slot:4 bus:3 span:1]
 1. PRI CPE
 2. PRI NET
[1-2]:1

Select dialplan context for AFT-A101 on port 1
 1. default
 2. public
 3. Custom
[1-3]:1


Input the dialing group for this port
: 1

Would you like to enable hardware DTMF detection?
 1. YES
 2. NO
[1-2, ENTER='YES']:1

Would you like to enable hardware fax detection?
 1. YES
 2. NO
[1-2, ENTER='NO']:1


Port 1 on AFT-A101 configuration complete...
Press any key to continue:

T1/E1 card configuration complete.
Press any key to continue:

------------------------------------
Configuring ISDN BRI cards [A500/B700]
------------------------------------

No Sangoma ISDN BRI cards detected

Press any key to continue:
------------------------------------
Configuring GSM cards [W400]
------------------------------------

No Sangoma GSM cards detected

Press any key to continue:

------------------------------------
Configuring analog cards [A200/A400/B600/B610/B700/B800]
------------------------------------
------------------------------------
Configuring USB devices [U100]
------------------------------------

###################################################################
#                             SUMMARY                             #
###################################################################

  1 T1/E1 port(s) detected, 1 configured
  0 ISDN BRI port(s) detected, 0 configured
  0 analog card(s) detected, 0 configured
  0 GSM card(s) detected, 0 configured
  0 usb device(s) detected, 0 configured

Configurator will create the following files:
    1. Wanpipe config files in /etc/wanpipe
    2. freetdm config file /usr/local/freeswitch/conf/freetdm.conf
    3. freetdm_xml config file /usr/local/freeswitch/conf/freetdm.conf.xml

Your configuration has been saved in /etc/wanpipe/debug-2012-05-18.tgz.
When requesting support, email this file to techdesk at sangoma.com


###################################################################

Configuration Complete! Please select following:
 1. YES - Continue
 2. NO - Exit
[1-2]:1



 Wanpipe configuration complete: choose action
 1. Save cfg: Stop Wanpipe now
 2. Do not save cfg: Exit
[1-2]:1

sh: asterisk: not found
sh: asterisk: not found

Stopping Wanpipe...


Removing old configuration files...

Copying new Wanpipe configuration files...

Copying new freetdm configuration files
(/usr/local/freeswitch/conf/freetdm.conf)...

Copying new freetdm configuration files
(/usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml)...

Wanrouter start complete...
Current boot level is 2

Wanrouter boot scripts configuration...

Removing existing wanrouter boot scripts...OK
Would you like wanrouter to start on system boot?
 1. YES
 2. NO
[1-2]:1

Verifying Zaptel boot scripts...
Enabling wanrouter init scripts ...(start:8, stop:91)
Sangoma cards configuration complete, exiting...

root at copycall:~#

thanks,
dave cook



On Mon, May 28, 2012 at 12:24 PM, Moises Silva <moises.silva at gmail.com>wrote:

> On Mon, May 28, 2012 at 12:49 AM, copycall <dave at copycall.com> wrote:
>
>> curriegrad2004,
>>
>> thanks for responding.
>>
>> unfortunately, the sangoma tech support has not been as crack as usual.
>>
>> i can go into the specifics, but it probably isn't necessary in a public
>> forum. i'm not looking to piss anyone off.
>>
>> if you have you actually configured a a101 sangoma card for a legacy CAS
>> T1 card, i would greatly appreciate your assistance.
>>
>>
>
> It's been a while since I configured for RBS, but I may be able to give
> you some pointers. Where are you at? did you have the drivers compiled?
>
> http://wiki.sangoma.com/wanpipe-freeswitch-ftdm
>
> As that web page states, RBS with FreeSWITCH is only supported using
> Wanpipe + DAHDI, not in native Wanpipe mode.
> http://wiki.sangoma.com/FreeSWITCH-Dahdi-Mode
>
> The module you want to use is ftmod_analog
>
>
>  *Moises Silva
> **Manager, Software Engineering***
>
> msilva at sangoma.com
>
> Sangoma Technologies
>
> 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada
>
>
> t.   +1 800 388 2475 (N. America)
>
> t.   +1 905 474 1990 x128
>
> f.   +1 905 474 9223
>
>
>
> **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
>
> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>  | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`|
> | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> Join Us At ClueCon - Aug 7-9, 2012
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120528/4522f54a/attachment.html 


Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users mailing list