[Freeswitch-users] Commercial Fax over T.30 for FreeSWITCH

[Alex Crow]

On 03/05/12 13:23, Anita Hall wrote:
> Hi Alex
>
> Thanks for the tip :)
>
> No, I am running FreeSWITCH on an Ubuntu 64-bit Quad core machine. 
> There is no VM.
>
> Is it possible to use Hylafax instead of or in combination to 
> FreeSWITCH if I am using Sangoma E1 Cards ?
>
> What all things should I check to ensure that the timing on my system 
> is good? Like, may be, my motherboard is bad or my kernel could be 
> tuned better ?
>
> Cheers!
>
> regards,
> Anita
>
>

Yes, you can use it with the E1 cards in exactly the same way, instead 
of bridging to a gateway you'd bridge to FreeTDM channel(s) for 
outbound. Inbound it's exactly the same. However I've just noticed a 
later post by Anthony in which he describes soft-modems built into 
Freeswitch directly. I would try that first as it was a right royal pain 
compiling T38modem!

Cheers

Alex


-- 
This message is intended only for the addressee and may contain
confidential information.  Unless you are that person, you may not
disclose its contents or use it in any way and are requested to delete
the message along with any attachments and notify us immediately.

"Transact" is operated by Integrated Financial Arrangements plc
Domain House, 5-7 Singer Street, London  EC2A 4BQ
Tel: (020) 7608 4900 Fax: (020) 7608 5300
(Registered office: as above; Registered in England and Wales under number: 3727592)
Authorised and regulated by the Financial Services Authority (entered on the FSA Register; number: 190856)