[Freeswitch-users] Sangoma Card Originate Not Working on Forwarded Call Numbers

[Anita Hall]

Thanks John.

I could take a pcap trace using
wanpipemon -i w4g1 -pcap -pcap_file sng_isdn_fwd.pc -prot ISDN -full
-systime -c trd

The q931 for a call which is not maturing is as follows. This is the case
when the called number is set to unconditional forwarding.
3    6.057463    Local User    Remote Network    Q.931    SETUP
5    6.142822    Remote Network    Local User    Q.931    CALL PROCEEDING
7    Remote Network    Local User    Q.931    DISCONNECT
9    Local User    Remote Network    Q.931    RELEASE
11    Remote Network    Local User    Q.931    RELEASE COMPLETE

This happens only with Sangoma Card. I am using the sangoma_isdn stack and
FreeTDM.  Somehow, it is not able to understand that the call is getting
forwarded.

The q931 for a call which is maturing is as follows
11    Local User    Remote Network    Q.931    SETUP
13    Remote Network    Local User    Q.931    CALL PROCEEDING
15    Remote Network    Local User    Q.931    ALERTING
17    Remote Network    Local User    Q.931    CONNECT
23    Remote Network    Local User    Q.931    DISCONNECT
25    Local User    Remote Network    Q.931    RELEASE
27    Remote Network    Local User    Q.931    RELEASE COMPLETE



regards,
Anita



On Mon, Mar 5, 2012 at 11:57 PM, John <freeswitch at earthspike.net> wrote:

> On 05/03/12 16:31, Anita Hall wrote:
> > Hi
> >
> > There are some numbers on which I am not able to originate calls from
> > a Sangoma Card, while I am able to do the same from a Digium like
> > card. I am using FreeTDM.
> >
> > >originate freetdm/4/a/07305880672 &park()
> >
> > Log is here http://pastebin.freeswitch.org/18578
> >
> > Note that I am able to call other numbers from this system and I have
> > a working PRI line and FreeTDM.
> >
> > Also the number 07305880672 is working fine. It unconditionally
> > forwards the call to another number. I am problem with calling all
> > such numbers.
> >
> > I am able to do q931 traces using sangoma_isdn but  how to view them ?
> >
> > regards,
> > Anita
> >
> Anita,
>
> You can use wireshark to decode the q.931 traces; the output files are
> .pcap format.
>
> John
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120306/fc64b549/attachment.html