[Freeswitch-users] Multiple network interfaces, can't force freeswitch to use one.

[curriegrad2004]

More than enough. Type in sofia status to verify your changes did take effect.

On Thu, Jun 28, 2012 at 2:36 PM, Joshua Nankin <jnankin at gmail.com> wrote:
> I did a sudo /etc/init.d/freeswitch restart.  That should be enough correct?
>
> On Thu, Jun 28, 2012 at 4:08 PM, Joshua Nankin <jnankin at gmail.com> wrote:
>>
>> sip-ip and rtp-ip in both external.xml and internal.xml were set to
>> $${local_ip_v4}.  I figured that setting the ip in vars.xml would be enough.
>>
>> I manually set sip-ip and rtp-ip and both of those files, but that still
>> did not solve the problem.
>>
>> Any other ideas?
>>
>>
>> On Thu, Jun 28, 2012 at 3:41 PM, Joshua Nankin <jnankin at gmail.com> wrote:
>>>
>>> I have two interfaces on my machine, eth0=10.0.2.15 and eth1=192.168.1.7.
>>>  I'm trying to get freeswitch to only use eth1.  I've put the following at
>>> the top of my vars.xml:
>>>
>>> <X-PRE-PROCESS cmd="set" data="local_ip_v4=192.168.1.7"/>
>>>
>>> However, this does not seem to be working.  When I originate a call, I
>>> see that the initial invite is originating from 10.0.2.15, but incoming
>>> packets from my sip provider are going to 192.168.1.7 and are not being
>>> responded to by freeswitch.  Shouldn't freeswitch be listening on
>>> 192.168.1.7 and sending packets from there as well?
>>>
>>> What am I doing wrong?
>>>
>>>
>>
>>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> Join Us At ClueCon - Aug 7-9, 2012
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>