[Freeswitch-users] Multiple network interfaces, can't force freeswitch to use one.

[Joshua Nankin]

sip-ip and rtp-ip in both external.xml and internal.xml were set to
$${local_ip_v4}.  I figured that setting the ip in vars.xml would be enough.

I manually set sip-ip and rtp-ip and both of those files, but that still
did not solve the problem.

Any other ideas?

On Thu, Jun 28, 2012 at 3:41 PM, Joshua Nankin <jnankin at gmail.com> wrote:

> I have two interfaces on my machine, eth0=10.0.2.15 and eth1=192.168.1.7.
>  I'm trying to get freeswitch to only use eth1.  I've put the following at
> the top of my vars.xml:
>
> <X-PRE-PROCESS cmd="set" data="local_ip_v4=192.168.1.7"/>
>
> However, this does not seem to be working.  When I originate a call, I see
> that the initial invite is originating from 10.0.2.15, but incoming packets
> from my sip provider are going to 192.168.1.7 and are not being responded
> to by freeswitch.  Shouldn't freeswitch be listening on 192.168.1.7 and
> sending packets from there as well?
>
> What am I doing wrong?
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120628/3dd8bd0e/attachment.html