[Freeswitch-users] Freeswitch & double NAT Configuration (Was: USER_NOT_REGISTERED with external profile)
Alexis de BRUYN [Mailinglists]
alexis.mailinglist at de-bruyn.fr
Thu Jan 19 00:48:43 MSK 2012
Hi Ryan,
Thank you for your answer, your server is behind NAT and your client too ?
Regards,
On 18.01.2012 05:06, Ryan How wrote:
> Hi,
>
> I set mine up for the external phones to log into the internal profile
> and it just worked (port 5060). But it might depend on the type of NAT
> or something, I'm by no means an expert on the subject.
>
> Probably worth securing it better than the default config once you get
> it going if it works on the internal profile.
>
> Ryan
>
>
> On 18/01/2012 5:04 AM, Alexis de BRUYN [Mailinglists] wrote:
>> Hi Everybody,
>>
>> I am trying to get a conversation between two natted clients and a
>> natted freeswitch server. I am playing with a fresh install, the
>> external profile and default directory (1000& 1001 users).
>>
>> I can see that my clients are registered on the server logs (on the 5080
>> port). All others needed ports are opened too.
>>
>> I have followed the instructions from the wiki to get a double nat
>> configuration, but my client phone are not ringing (and I cannot hear
>> anything).
>>
>> All is working fine with defaults in a non nat configuration (with
>> internal profile).
>>
>> Is there anything special to set up in the directory / user configuration ?
>>
>> Can anyone give me some hints with his natted configuration ? I am stuck.
>>
>> Thanks for your help.
>>
>> Regards,
>>
>> -------- Original Message --------
>> Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile
>> Date: Mon, 16 Jan 2012 23:37:20 +0100
>> From: Alexis de BRUYN [Mailinglists]<alexis.mailinglist at de-bruyn.fr>
>> Reply-To: FreeSWITCH Users Help<freeswitch-users at lists.freeswitch.org>
>> To: freeswitch-users at lists.freeswitch.org
>>
>> Hi Everybody,
>>
>> I am trying to use FreeSwitch in a (double) NAT Configuration from a
>> fresh snapshot install (Debian Squeeze, server outside from my client
>> LAN) with default directory for users.
>>
>> When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the
>> callee, the phone doesn't ring and automatically hangup, I see in the
>> console :
>>
>> 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot
>> create outgoing channel of type [error] cause: [USER_NOT_REGISTERED]
>> 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot
>> create outgoing channel of type [user] cause: [USER_NOT_REGISTERED]
>>
>> However, 1000 and 1001 are registered (from the same LAN) :
>>
>> sofia status profile external
>>
>> =================================================================================================
>> Name external
>> Domain Name N/A
>> Auto-NAT false
>> DBName sofia_reg_external
>> Pres Hosts
>> Dialplan XML
>> Context public
>> Challenge Realm auto_to
>> RTP-IP 192.168.1.6
>> SIP-IP 192.168.1.6
>> URL sip:mod_sofia at 192.168.1.6:5080
>> BIND-URL sip:mod_sofia at 192.168.1.6:5080
>> HOLD-MUSIC local_stream://moh
>> OUTBOUND-PROXY N/A
>> CODECS IN G7221 at 32000h,G7221 at 16000h,G722,PCMU,PCMA,GSM
>> CODECS OUT PCMU,PCMA,GSM
>> TEL-EVENT 101
>> DTMF-MODE rfc2833
>> CNG 13
>> SESSION-TO 0
>> MAX-DIALOG 0
>> NOMEDIA false
>> LATE-NEG false
>> PROXY-MEDIA false
>> AGGRESSIVENAT false
>> STUN-ENABLED true
>> STUN-AUTO-DISABLE false
>> CALLS-IN 3
>> FAILED-CALLS-IN 0
>> CALLS-OUT 0
>> FAILED-CALLS-OUT 0
>>
>> Registrations:
>> =================================================================================================
>> Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm
>> User: 1001 at X.Y.Z.T
>> Contact: "Freeswitch"<sip:1001 at A.B.C.D:50193>
>> Agent: Bria iOS 2.0.0
>> Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934)
>> Host: phone
>> IP: A.B.C.D
>> Port: 50193
>> Auth-User: 1001
>> Auth-Realm: X.Y.Z.T
>> MWI-Account: 1001 at X.Y.Z.T
>>
>> Call-ID: 3c27b7424837-bsfi877ujb2n
>> User: 1000 at X.Y.Z.T
>> Contact: "freeswitch"<sip:1000 at 192.168.0.69:2048;line=skgk4hug>
>> Agent: snom300/8.4.32
>> Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658)
>> Host: phone
>> IP: A.B.C.D
>> Port: 62061
>> Auth-User: 1000
>> Auth-Realm: X.Y.Z.T
>> MWI-Account: 1000 at X.Y.Z.T
>>
>> Total items returned: 2
>> =================================================================================================
>>
>> All necessary ports are opened/forwarded on the server.
>>
>> I See on the 1000 configuration that this is the local ip address which
>> is set as contact. Is there any other setups to do in the directory ?
>> Or other parameters in the external profile ?
>>
>> Thanks for your help !
>>
>> Regards,
>>
>> --
>> Alexis de BRUYN
>> Mail : alexis.mailinglist at de-bruyn.fr
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>>
>>
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
--
--
Alexis de BRUYN
Mail : alexis.mailinglist at de-bruyn.fr
Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users
mailing list