[Freeswitch-users] Problem with flex client connecting to mod_rtmp

Wed Aug 8 12:07:26 MSD 2012

Thanks Jack,

but as mentioned we are at an earlier stage. So far the Flex client has
not yet conneted to Freeswitch.
We still have a connect problem.

Best regards
Peter

On 08/07/12 17:51, Jack wrote:
> Peter,
>   Here is my rtmp.conf.xml:
>
> <configuration name="rtmp.conf" description="RTMP Endpoint">
>   <profiles>
>     <profile name="default">
>         <settings>
>             <param name="bind-address" value="0.0.0.0:1935" />
>             <param name="context" value="public" />
>             <param name="dialplan" value="XML" />
>             <!-- If this is set to true, no unauthenticated inbound
> calls will be allowed -->
>             <param name="auth-calls" value="true" />
>             <!-- How much time should the clients buffer the media
> stream (miliseconds) -->
>             <param name="buffer-len" value="50" />
>             <!-- Sets the maximum size of outbound RTMP chunks -->
>             <param name="chunksize" value="512" />
>         </settings>
>     </profile>
>   </profiles>
> </configuration>
>
> It is important to specify the context and then make sure you have a
> condition in your corresponding dial plan that will catch your call.
>
> Jack
>
>
>
> On 8/7/2012 1:11 AM, Peter Steinbach wrote:
>> Hello Jack,
>>
>> here are some answers to your your questions:
>>
>>> Make sure you use a fully qualified username not just the extension
>>> 1001 at xxx.xxx.xxx.xxx >the XXX would be the IP of your FreeSwitch Server.
>> I am still in the "connect" state, I am not logging in yet. The webpage
>> tells me "Connecting... " and waits forever
>>
>>> did you configure your rtmp.conf.xml and have a matching context in
>> your dial plan?
>> I am still in the "connect" state
>>
>> In the web page make sure these two vars are set to YOUR Freeswitch
>> server ip: var rtmpIPURL =
>>> "rtmp://xxx.xxx.xxx.xxx/phone"; var rtmpIP="xxx.xxx.xxx.xxx";
>> I did not have a rtmpIP var, so I added it to the code, but no change.
>>
>> In fact as I can see while grepping the network traffic, the Flex app
>> and Freeswicth are negociating their protocol and freeswitch logs a
>> "Sent connect reply", but this is very diferent from what is sent from
>> the conference.freeswitch.org server.
>>
>> Best regards
>> Peter
>>
>>
>> On 08/07/12 06:26, Jack wrote:
>>> Hi Peter,
>>> Make sure you use a fully qualified username not just the extension 
>>> 1001 at xxx.xxx.xxx.xxx
>>> the XXX would be the IP of your FreeSwitch Server.
>>>
>>> did you configure your rtmp.conf.xml and have a matching context in your 
>>> dial plan?
>>>
>>> In the web page make sure these two vars are set to YOUR Freeswitch 
>>> server ip:
>>> var rtmpIPURL = "rtmp://xxx.xxx.xxx.xxx/phone";
>>>   var rtmpIP="xxx.xxx.xxx.xxx";
>>>
>>> jack
>>>
>>> On 8/6/2012 5:44 PM, Peter Steinbach wrote:
>>>> Hello,
>>>>
>>>> today I tried the flex client with the mod_rtmp implementation.
>>>> On a brandnew freeswitch I installed mod_rtmp and copied the flex
>>>> direrectory to a web server and loaded the web page.
>>>>
>>>> However the flex client does not connect:
>>>> Here's my freeswitch log
>>>> 2012-08-07 02:32:03.585671 [NOTICE] mod_rtmp.c:744 New RTMP session
>>>> [f35a192c-0d02-4320-89e9-775a3573ee25]
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:702 Sent handshake response
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:727 Done with handshake
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=3 type=0x14
>>>> ts=0 stream_id=0x0] len=342
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:170 [amfnumber=3] Got INVOKE
>>>> for connect
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x1
>>>> stream_id=0x0] len=4
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x5
>>>> stream_id=0x0] len=4
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x6
>>>> stream_id=0x0] len=5
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x4
>>>> stream_id=0x0] len=6
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
>>>> stream_id=0x0] len=201
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
>>>> stream_id=0x0] len=61
>>>> 2012-08-07 02:32:03.685670 [NOTICE] rtmp_sig.c:121 Sent connect reply
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=2 type=0x5
>>>> ts=12247364 stream_id=0x0] len=4
>>>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:945 Set window size: 131072 bytes
>>>>
>>>> If I change the rtmp_url to 'rtmp://conference.freeswitch.org/phone',
>>>> flex does connect.
>>>>
>>>> But in my freeswitch this fails. I have traced the network traffic and I
>>>> can see that there is information flow between freeswitch and the client
>>>> on connect request.
>>>>
>>>> Somebody has an idea where to look further?
>>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> 
>>> 
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> Join Us At ClueCon - Aug 7-9, 2012
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> 
>> 
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> Join Us At ClueCon - Aug 7-9, 2012
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> Join Us At ClueCon - Aug 7-9, 2012
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-- 
With kind regards
Peter Steinbach 

Telefaks Services GmbH
mailto:lists (att) telefaks.de
Internet: www.telefaks.de

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120808/f5d23429/attachment-0001.html 