[Freeswitch-users] Problem with flex client connecting to mod_rtmp

[Peter Steinbach]

Hello Jack,

here are some answers to your your questions:

> Make sure you use a fully qualified username not just the extension
>1001 at xxx.xxx.xxx.xxx >the XXX would be the IP of your FreeSwitch Server.
I am still in the "connect" state, I am not logging in yet. The webpage
tells me "Connecting... " and waits forever

> did you configure your rtmp.conf.xml and have a matching context in
your dial plan?
I am still in the "connect" state

In the web page make sure these two vars are set to YOUR Freeswitch
server ip: var rtmpIPURL =
> "rtmp://xxx.xxx.xxx.xxx/phone"; var rtmpIP="xxx.xxx.xxx.xxx";
I did not have a rtmpIP var, so I added it to the code, but no change.

In fact as I can see while grepping the network traffic, the Flex app
and Freeswicth are negociating their protocol and freeswitch logs a
"Sent connect reply", but this is very diferent from what is sent from
the conference.freeswitch.org server.

Best regards
Peter


On 08/07/12 06:26, Jack wrote:
> Hi Peter,
> Make sure you use a fully qualified username not just the extension 
> 1001 at xxx.xxx.xxx.xxx
> the XXX would be the IP of your FreeSwitch Server.
>
> did you configure your rtmp.conf.xml and have a matching context in your 
> dial plan?
>
> In the web page make sure these two vars are set to YOUR Freeswitch 
> server ip:
> var rtmpIPURL = "rtmp://xxx.xxx.xxx.xxx/phone";
>   var rtmpIP="xxx.xxx.xxx.xxx";
>
> jack
>
> On 8/6/2012 5:44 PM, Peter Steinbach wrote:
>> Hello,
>>
>> today I tried the flex client with the mod_rtmp implementation.
>> On a brandnew freeswitch I installed mod_rtmp and copied the flex
>> direrectory to a web server and loaded the web page.
>>
>> However the flex client does not connect:
>> Here's my freeswitch log
>> 2012-08-07 02:32:03.585671 [NOTICE] mod_rtmp.c:744 New RTMP session
>> [f35a192c-0d02-4320-89e9-775a3573ee25]
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:702 Sent handshake response
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:727 Done with handshake
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=3 type=0x14
>> ts=0 stream_id=0x0] len=342
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:170 [amfnumber=3] Got INVOKE
>> for connect
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x1
>> stream_id=0x0] len=4
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x5
>> stream_id=0x0] len=4
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x6
>> stream_id=0x0] len=5
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x4
>> stream_id=0x0] len=6
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
>> stream_id=0x0] len=201
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
>> stream_id=0x0] len=61
>> 2012-08-07 02:32:03.685670 [NOTICE] rtmp_sig.c:121 Sent connect reply
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=2 type=0x5
>> ts=12247364 stream_id=0x0] len=4
>> 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:945 Set window size: 131072 bytes
>>
>> If I change the rtmp_url to 'rtmp://conference.freeswitch.org/phone',
>> flex does connect.
>>
>> But in my freeswitch this fails. I have traced the network traffic and I
>> can see that there is information flow between freeswitch and the client
>> on connect request.
>>
>> Somebody has an idea where to look further?
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> Join Us At ClueCon - Aug 7-9, 2012
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org