[Freeswitch-users] Freeswitch and network bonding

[B.Tietz at pinguin.ag]

Hi,

from http://wiki.freeswitch.org/wiki/Enterprise_deployment_IP_Failover#Sofia_Profiles
there you have: 
'Also, you'll have to specify the SIP, RTP bind IP etc to be the floating IP, rather than the machine's auto-detected IP.
rtp-ip, sip-ip, presence-hosts, ext-rtp-ip, ext-sip-ip'

So. change the above params in your internal profile and the bonding IP should work.

VG,
Benjamin T.

-----Ursprüngliche Nachricht-----
Von: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Sharad Garg
Gesendet: Dienstag, 17. April 2012 12:23
An: freeswitch-users at lists.freeswitch.org
Betreff: [Freeswitch-users] Freeswitch and network bonding

Hi All

I am trying to run the Freeswitch with network bonding. My scanerio is -

eth0    -    192.168.4.25
eth1    -    192.168.4.30
bond0    -    192.168.4.65        This is the virtual IP which is to access 
the freeswitch.

The issue is when I make a call to 192.168.4.65 which is a virtual ip of Freeswitch system, this call dies not reach at Freeswitch. When I do wireshark, wireshark shows `Destination unreachable'.

The same freeswitch works well if I disable the network bonding.

Here I would like to mention that I have not made any kind of settings in Freeswitch to run with network bonding.

Can someone help me why call is not arriving at Freeswitch when network bonding is enabled.

Thanks in advance.

Best Regards
Sharad