[Freeswitch-users] GXW4104 gateway setup for outgoing calls
Nandy Dagondon
gcd at i.ph
Fri Sep 16 11:35:05 MSD 2011
pls see my comments below. you're welcome.
-nandy
On Fri, Sep 16, 2011 at 1:14 PM, ocset <ocset at the800group.com> wrote:
> Hi Nandy
>
> Thanks for your help so far - unfortunately this is still not working.
>
> Based on your examples, I have created the following two files
>
> 1.
> ../sip_profile/internal/01_custom.xml
>
> <include>
> <param name="multiple-registrations" value="true"/>
> <param name="accept-blind-reg" value="true"/>
> <param name="accept-blind-auth" value="true"/>
>
> <gateway name="gxw4104-fxo">
>
> <param name="username" value="1019"/>
> <param name="password" value="1234"/>
> <param name="realm" value="192.168.0.160"/>
> <param name="sip-port" value="5060"/>
> <param name="rtp_ip" value="192.168.0.160"/>
>
> <param name="dtmf-type" value="rfc2833"/>
> <param name="expire-seconds" value="600"/>
> <param name="register" value="false"/>
> <param name="caller-id-in-from" value="false"/>
> </gateway>
> </include>
>
> 2.
> ../dialplan/default/01_custom.xml
>
> <include>
> <extension name="gxw4104-fxo-local">
>
> <condition field="${toll_allow}" expression="local"/>
> <condition field="destination_number" expression="^(\d{10})$">
> <action application="set"
> data="effective_caller_id_number=5555555555"/>
>
> <action application="set"
> data="effective_caller_id_name=ThisIsMyCompany"/>
> <action application="set" data="ignore_early_media=ring_ready"/>
> <action application="set" data="ringback=${us-ring}"/>
> <action application="bridge" data=
> "sofia/gateway/gxw4104-fxo/$1 at 192.168.0.160:5060"<sofia/gateway/gxw4104-fxo/$1 at 192.168.0.160:5060>
> />
> </condition>
> </extension>
> </include>
>
>
>
> Command "sofia status" shows the followiing
>
> internal profile
> sip:mod_sofia at 192.168.0.23:5060 RUNNING (0)
> internal::gxw4104-fxo gateway sip:1019 at 192.168.0.160
> NOREG
> external profile
> sip:mod_sofia at 192.168.0.23:5080 RUNNING (0)
> external::example.com gateway sip:joeuser at example.com
> NOREG
> internal-ipv6 profile sip:mod_sofia@[::1]:5060
> RUNNING (0)
> 192.168.0.23 alias
> internal ALIASED
>
>
> Here is the call log when I try do dial out:
>
> 2011-09-16 12:57:30.903616 [NOTICE] switch_channel.c:669 New Channel
> sofia/internal/1014 at 192.168.0.23 [0a83e803-b3fc-4a46-bc74-9d6786dac8e2]
> 2011-09-16 12:57:30.933863 [INFO] mod_dialplan_xml.c:418 Processing User
> 1014->0412345678 in context default
> 2011-09-16 12:57:30.950359 [NOTICE] switch_channel.c:669 New Channel
> sofia/internal/0412345678 at 192.168.0.160:5060[24111b8d-25f0-4433-a49f-88973730ebfb]
> 2011-09-16 12:57:40.957391 [NOTICE] sofia.c:4789 Hangup
> sofia/internal/0412345678 at 192.168.0.160:5060 [CS_CONSUME_MEDIA]
> [NORMAL_TEMPORARY_FAILURE]
> 2011-09-16 12:57:40.958554 [NOTICE] switch_core_session.c:1182 Session 7 (
> sofia/internal/0412345678 at 192.168.0.160:5060) Ended
> 2011-09-16 12:57:40.958554 [NOTICE] switch_core_session.c:1184 Close
> Channel sofia/internal/0412345678 at 192.168.0.160:5060 [CS_DESTROY]
> 2011-09-16 12:57:40.958554 [INFO] mod_dptools.c:2355 Originate Failed.
> Cause: NORMAL_TEMPORARY_FAILURE
> 2011-09-16 12:57:40.958554 [NOTICE] mod_dptools.c:2418 Hangup
> sofia/internal/1014 at 192.168.0.23 [CS_EXECUTE] [NORMAL_TEMPORARY_FAILURE]
> 2011-09-16 12:57:40.995191 [NOTICE] switch_core_session.c:1182 Session 6 (
> sofia/internal/1014 at 192.168.0.23) Ended
> 2011-09-16 12:57:40.995191 [NOTICE] switch_core_session.c:1184 Close
> Channel sofia/internal/1014 at 192.168.0.23 [CS_DESTROY]
>
>
>
> I have the following questions
>
> 1. What is the significance of the user 1019? I have a default install of
> FS so that user does exist but I am not logged in as that user on my sip
> phone. I am logged in as user 1014.
>
> 1019 is the user account for the FXO port to handle incoming calls. so, the
login details must be set on directory/default/1019.xml.
actually, the user and password entries can be deleted because FS is not
registering to the FXO gateway.
> 2. The resultant log does not show my gateway being used but instead shows
> "/sofia/internal/0412345678 at 192.168.0.160:5060"</sofia/internal/0412345678 at 192.168.0.160:5060>.
> Is that expected behaviour?
>
> it's not hitting the dialplan, i guess. i suggest you create prefix 9 for
PSTN calls e.g.
<condition field="destination_number" expression="^9(\d+)$">
and make the file ../dialplan/default/01_custom.xml is on top of
dialplan/default directory so it will be scanned early.
> 3. I assumed that the IP address 192.168.0.9 in your example is the address
> of your HT503 and not FS. I have thus replaced it with the IP address from
> my GXW4104 (192.168.0.160). Is that correct?
>
> that is correct.
>
>
>
>
>
>
> On 09/13/2011 11:42 PM, Nandy Dagondon wrote:
>
> i inserted my answers to your questions below. for point #3), here's an
> example how i configured my FXO port of ht503.
>
> included in sip_profile/internal:
> <include>
> <gateway name="ht503-fxo">
> <param name="username" value="1019"/> <-- it's registered to receive
> incoming calls
> <param name="realm" value="192.168.0.9"/>
> <param name="sip-port" value="5062"/> <-- port 5060 is set to the FXS
> port
> <param name="password" value="1234"/>
> <param name="rtp_ip" value="192.168.0.9"/>
> <param name="dtmf-type" value="rfc2833"/>
> <param name="expire-seconds" value="600"/>
> <param name="register" value="false"/>
> <param name="caller-id-in-from" value="false"/>
> </gateway>
> </include>
>
> included in dialplan/default
>
> <include>
> <extension name="ht503-fxo-local">
> <condition field="${toll_allow}" expression="local"/>
> <condition field="destination_number" expression="^9([2-9]\d{6})$">
> <action application="set" data="effective_caller_id_number=0321234567
> "/>
> <action application="set" data="effective_caller_id_name=ThisIsMy
> Company"/>
> <action application="set" data="ignore_early_media=ring_ready"/>
> <action application="set" data="ringback=${us-ring}"/>
> <action application="bridge" data="sofia/gateway/ht503-fxo/$
> 1 at 192.168.0.9:5062"/>
> </condition>
> </extension>
> </include>
>
> it looks you can create 4 internal gateways for the every port, fxo-1 to
> fxo-4, w/ the same realm/rtp_ip values but setting different sip-port
> values. then your bridge app would be:
>
> <action application="bridge"
> data="sofia/gateway/fxo-1/$1|sofia/gateway/fxo-2/$1|sofia/gateway/fxo-3/$1sofia/gateway/fxo-4/$1"/>
>
> if u want to dialout any free port.
>
> i haven't tested the above. just try it. i hope it works.
>
> -nandy
>
>
> On Tue, Sep 13, 2011 at 6:10 PM, ocset <ocset at the800group.com> wrote:
>
>> Hi Nandy
>>
>> Thanks for your reply. I assume 192.168.0.9 in your example is the IP
>> address of the GXW4104?
>>
> yes.
>
>>
>>
> Some more questions
>>
>> 1. When you say port number, is this something I should be setting up on
>> the GXW4104 so that it is listening on those 4 port numbers? If yes, what
>> would be the setting I am looking for?
>>
> not for every port. the gateway has a base port number e.g. 5060 for
> port#1. add 2 to the subsequent ports e.g. 5062 for port#2 and so on. this
> is pointed out by sergey.
>
>>
>> 2. Does that mean I don't define a new gateway in FreeSWITCH?
>>
> it's an option. but defining a gateway is cleaner.
>
>
>>
>>
> 3. In your example, you said the bridge data would be
>> 7654321 at 192.168.0.9:5063. What would the whole line look like in the
>> dialplan?*
>>
>> <action application="bridge" data="sofia/gateway/7654321 at 192.168.0.9:5063
>> **"/>*
>>
>> Still very confused :-)
>>
>> Thanks
>>
>>
>> On 09/13/2011 03:45 PM, Nandy Dagondon wrote:
>>
>> hi,
>>
>> if GWX4104 is in your local network, use the internal profile for the
>> gateway. register your FXO accounts to receive incoming calls (i think you
>> did this already).
>>
>> to dialout the ports, specify the port number 5060~5063 assuming Port1
>> starts at 5060. to dialout via port4, the bridge data should look like:
>>
>> 7654321 at 192.168.0.9:5063
>>
>> hope it helps.
>>
>> -nandy
>>
>>
>> On Tue, Sep 13, 2011 at 2:49 PM, ocset <ocset at the800group.com> wrote:
>>
>>> Hi
>>>
>>> I have recently bought a Grandstream GXW4104 (4 FXO ports) and need some
>>> help setting up a gateway to call out using the GXW4104. I am really out of
>>> my depth here and may be looking at this the wrong way so please bear with
>>> me.
>>>
>>> I followed the advice on this website
>>> "http://www.timhunt.net/wiki/FreeSwitch:GXW4104"<http://www.timhunt.net/wiki/FreeSwitch:GXW4104>and incoming calls from a PSTN line are working great. Now I need to setup a
>>> dialplan so that outgoing calls are routed through the same PSTN line on the
>>> GXW4104. I will eventually have 4 PSTN lines with a dialplan to use the
>>> first available line (if that is possible).
>>>
>>> According to the FreeSWITCH 1.0.6 book (and many online posts) I need to
>>> create a gateway and a dialplan but all the gateway examples are for SIP
>>> accounts.
>>>
>>> So, the gateway definition seems to need a username and password but the
>>> GXW4104 does not have that capability. I found this gateway definition in
>>> the freeswitch.xml.fsxml file but am not sure how many of these variables
>>> are required.
>>>
>>> <gateways>
>>> <gateway name="example.com">
>>> <param name="username" value="joeuser"/>
>>> <param name="password" value="password"/>
>>> <param name="from-user" value="joeuser"/>
>>> <param name="from-domain" value="example.com"/>
>>> <param name="expire-seconds" value="600"/>
>>> <param name="register" value="false"/>
>>> <param name="retry-seconds" value="30"/>
>>> <param name="extension" value="5000"/>
>>> <param name="context" value="public"/>
>>> </gateway>
>>> </gateways>
>>>
>>>
>>> If I define a gateway called "gxw4104", then this is what I think a
>>> simple dialplan should look like but I'm not sure of the gateway details in
>>> the "bridge" section of the definition.
>>>
>>> <extension name="gxw4104_out">
>>> <condition field="destination_number" expression="^(\d{10})$">
>>> *<action application="bridge"
>>> data="sofia/gateway/gxw4104/........"/> (what should this be???)*
>>> </condition>
>>> </extension>
>>>
>>> Am I moving in the right direction and can someone fill in the blanks for
>>> me please
>>>
>>> Thanks in advance!
>>>
>>>
>>>
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>>
>> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>>
>>
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
>
> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110916/e1a3cc59/attachment-0001.html
Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users
mailing list