[Freeswitch-users] Setting Up an Sip Trunk without Authentication

[Michael Collins]

Did you reloadxml and restart the sofia profile after the changes? Also, you
need to "reloadacl" after doing a change to acl.conf.xml.

-MC

On Thu, Jun 16, 2011 at 1:27 PM, Dave <dave at clancysystems.com> wrote:

>  Yes, I am only testing inbound.  When I call from our office phone (not
> connected to FreeSWITCH, it's on a trunk from broadvox)  I Get a busy signal
> and at that moment FreeSWITCH shows...
>  "SIP auth challenge (INVITE) on sofia profile 'internal' for
> [myphone at theirIP] from their IP.
>
> If I call from my cell phone I get the Operator Message "your call did not
> go through" and at that moment the same thing shows in FreeSWITCH
>  "SIP auth challenge (INVITE) on sofia profile 'internal' for
> [myphone at theirIP] from their IP.
>
>
>
> ----- Original Message -----
> *From:* Michael Collins <msc at freeswitch.org>
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Sent:* Thursday, June 16, 2011 2:11 PM
> *Subject:* Re: [Freeswitch-users] Setting Up an Sip Trunk without
> Authentication
>
>
>
> On Thu, Jun 16, 2011 at 1:02 PM, Dave <dave at clancysystems.com> wrote:
>
>>
>> Under "domains" in acl.conf.xml I added
>>
>>    <node type="allow" value="xxx.xxx.xxx.xxx"/>
>>
>>
> The correct syntax is:
> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/>
>
>
>>  x's are the IP address it's just a single address not a CIDR.
>>
>>
>> And I created the file velocity_did.xml with the following code..
>>
>> <include>
>>   <extension name="velocity_did">
>>
>>     <condition field="destination_number" expression="^(2064001950)$">
>>       <action application="set" data="domain_name=$${domain}"/>
>>       <action application="answer"/>
>>
>>    <action application="lua" data="cme_ivr.lua channel_name"/>
>>
>>  </condition>
>>   </extension>
>> </include>
>> I still just get the "SIP auth challenge (INVITE) on sofia profile
>> 'internal' for [myphone at theirIP] from their IP, but nothing more.
>>
>>
> Wait - can you explain *exactly* what you're doing for testing? Are you
> trying to dial out via Velocity and back in to your DID? If so then you have
> 2 completely different things you need to set up. The instructions I gave
> were only for inbound DID, so use a cell phone or something to test that.
>
> For outbound it seems like they are sending you an auth challenge, which
> means they need to give you a username and password as well as a host/ip.
> You need to create a gateway, preferably in your external profile. Just be
> sure to set the "register" param to false since they are not expecting you
> to register with them.
>
> -MC
>
>  Do I need to change the line ..
>>
>> <action application="set" data="domain_name=$${domain}"/>
>> to the IP address? If so what syntax?
>>
>> They have no Domain Name.
>>
>> Thanks again for your help.
>>
>> Dave Goodwin
>>
>>
>> ----- Original Message -----
>> *From:* Michael Collins <msc at freeswitch.org>
>> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Sent:* Thursday, June 16, 2011 12:15 PM
>> *Subject:* Re: [Freeswitch-users] Setting Up an Sip Trunk without
>> Authentication
>>
>> Dave,
>>
>> If you are simply handling incoming calls then you will need to do two
>> things:
>>
>> Add Velocity's IP addr to the domains section of acl.conf.xml
>> Add an extension to the public context (conf/dialplan/public.xml)
>>
>> Allowing a call into FS via an ACL will send it into the "public" context;
>> from there you need to transfer it to the default context or just send it
>> straight to your Lua script.
>>
>> Also, I don't believe you need to use a "bridge" app based on the
>> description you gave. Bridge is used to create a new outbound call leg (B
>> leg) and connect it to the inbound call leg (A leg). If you just are
>> handling a call with an IVR then there is no B leg needed, thus no need to
>> bridge.
>>
>> Welcome to FreeSWITCH, btw! :) I can highly recommend the FS book (the
>> "bridge" book, ironically) as it discusses some of these basic concepts that
>> will make your FS experience a whole lot more pleasant.
>>
>> -MC
>>
>> On Thu, Jun 16, 2011 at 8:54 AM, Dave <dave at clancysystems.com> wrote:
>>
>>>  Hi,
>>>
>>> I am new to FreeSWITCH and need to set up FreeSWITCH to receive calls
>>> through a Velocity Networks SIP trunk. They say I should not authenticate
>>> with Username and Password. Rather, I connect directly to the their IP
>>> address.
>>>
>>> I put
>>>
>>> <extension name="velocity">
>>>       <condition field="destination_number" expression="^2064001950$">
>>>         <action application="bridge" data="sofia/external/$
>>> {destination_number}@their_ip_address"/>
>>>         <action application="lua" data="cme_ivr.lua channel_name"/>
>>>      </condition>
>>> </extension>
>>>
>>> in the default.xml under Dialplan
>>>
>>> When I Dial the DID from a Phone (not one connected to the FreeSWITCH
>>> server) I get the "SIP auth challenge (INVITE) on sofia profile 'internal'
>>> for [myphone at theirIP] from their IP, but nothing more.
>>>
>>> What I hope to do is take the incoming call from 2064001950 and route it
>>> to the Lua IVR script above.
>>>
>>> I Appreciate any help you may offer.
>>>
>>> Dave Goodwin
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _______________________________________________
>> Join us at ClueCon 2011, Aug 9-11, Chicago
>> http://www.cluecon.com 877-7-4ACLUE
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Join us at ClueCon 2011, Aug 9-11, Chicago
> http://www.cluecon.com 877-7-4ACLUE
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110616/1cc57a22/attachment-0001.html