[Freeswitch-users] originating a call from an outbound socket app

[Michael Collins]

Also, I don't think this is helping you:
  EslMessage response = sendSyncSingleLineCommand(channel, "myevents");

Look here to see what "myevents" does:
http://wiki.freeswitch.org/wiki/Mod_event_socket#Special_Case_-_.27myevents.27

-MC

On Thu, Jun 9, 2011 at 1:22 PM, Hector Geraldino <
Hector.Geraldino at ip-soft.net> wrote:

> Hi Michael,
>
>
>
> Thanks for replying back. I’ve pasted a sample application on pastebin, the
> URL is:
>
>
>
> http://pastebin.com/MYusWe3V
>
>
>
> What I’m trying to do (and have partially accomplished) is:
>
>
>
> -Answer the call
>
> - Play a message
>
> - wait for a command (dtmf or voice, this is out of the sample app for the
> sake of keeping it short & simple)
>
> - originate a new call, wait for it to be answered and depending on an
> event (dtmf)…
>
> - …do the bridge or dial another extension.
>
>
>
> The extension number is external (managed by a Cisco CCM). If I try to do
> the bridge from the XML dialplan it works perfect. When I try to do it from
> an outbound socket java application, anything happens, and almost no
> information is logged on FS log that I can use to decide what might be
> happening.
>
>
>
> Thanks again for your help. I truly appreciate it.
>
>
>
> Hector
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Michael
> Collins
> *Sent:* Thursday, June 09, 2011 12:47 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] originating a call from an outbound
> socket app
>
>
>
> I would say that you want to bridge the inbound leg to the outbound leg and
> use the answer confirmation variables. I recommend you pastebin a simple
> java app that answers the call and attempts to bridge it and also pastebin
> the console log. The community will take a look and see if we can help you
> figure out what is happening.
>
>
>
> -MC
>
> On Wed, Jun 8, 2011 at 3:14 PM, Hector Geraldino <
> Hector.Geraldino at ip-soft.net> wrote:
>
> Hi all,
>
>
>
> I’ve been playing with FS around weeks, with some level of success. Right
> now I’m stuck trying to dial an extension, or to bridge a call to an
> external extension. Briefly, the scenario is the following:
>
>
>
> -          Cisco CCM forwarding SIP calls to FS
>
> -          FS in outbound mode,  forwarding calls to a Java application
> using freeswitch-esl jar
>
>
>
> The java application answers the call, says a dialogue using TTS and
> receives input using DTFM or speech commands; all this is working pretty
> well. Now I’m trying to put this call in hold, originate a call to another
> extension and, depending on the result (call answered, not answered,
> destination user presses an specific number generating an expected DTMF), I
> need to bridge both calls and finish the session.
>
>
>
> I try several ways to get this done with no luck yet: using api originate
> to make the call with different arguments ({ignore_early_media,  etc). I
> even tried to skip this step and just do the bridge between the inbound call
> and the external extension, but this  didn’t work either. I can’t see any
> errors thrown by FS, and the result of the command is +OK, but nothing
> happens, the external phone never rings. The FS log only says:
>
>
>
> [DEBUG] switch_core_session.c:954 Send signal sofia/external/
> 5655 at 192.168.8.1 [BREAK] <= this ext/IP address is from the inbound
> caller, not the one I’m trying to connect to.
>
>
>
> My first impression was that I might have something wrong with the
> originate/bridge parameters. I changed the dialplan XML file to just do the
> bridge, and it worked like a charm.
>
>
>
> <include>
>
> <extension name="test">
>
>         <condition field="destination_number" expression="6114|5121">
>
> <!--    <action application="socket" data="localhost:8044 async full"/>
> -->
>
>           <action application="bridge" data="sofia/external/
> 5562 at 192.168.2.14" />
>
>         </condition>
>
> </extension>
>
> </include>
>
>
>
> I don’t know what path to follow here. I was unable to find relevant
> examples on google that guides me to solve this little issue. Any advices?
>
>
>
> Thanks all,
>
> Hector
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110609/54ada4e8/attachment.html