[Freeswitch-users] Faxing problems if B leg offers T.38

Thu Jun 2 21:38:54 MSD 2011

Should I open a JIRA case? Two?

Thank you,

Rob

From: Rob Morin [mailto:rmorin at blie-ent.com] 
Sent: Wednesday, May 25, 2011 12:56 PM
To: 'FreeSWITCH Users Help'
Subject: Re: [Freeswitch-users] Faxing problems if B leg offers T.38

Thank you.

So, I believe that there are two potential problems, fixing either of which
will allow me to send faxes.

1.       When T.38 is enabled in passthrough mode and the B leg offers T.38,
Freeswitch needs to forward the invite and the responses. Currently it isn’t
forwarding the response back to the B leg.

2.       When T.38 is not enabled and the B leg offers T.38, Freeswitch
needs to respond with a 488 indicating T.38 is not acceptable.  Currently it
doesn’t respond at all.

How would I go about making or requesting these fixes?

Thank you,
Rob

From: David Ponzone [mailto:david.ponzone at ipeva.fr] 
Sent: Wednesday, May 25, 2011 11:11 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Faxing problems if B leg offers T.38

Rob,

On my test box, I run a GIT from 05-02, and I don't have any issue.

But I just did the test, and the call flow is different from yours.

When I send a fax with my endpoint (Zoiper Softphone), I got the remote fax
tone, and then my Zoiper sends the T38-REINVITE, not the remote gateway.

So I guess there are 2 possible call flows, because I remember in some
circumstances, the remote sends the RE-INVITE.

David Ponzone  Direction Technique

email: david.ponzone at ipeva.fr

tel:      01 74 03 18 97

gsm:   06 66 98 76 34

Service Client IPeva

tel:      0811 46 26 26

www.ipeva.fr <BLOCKED::http://www.ipeva.fr/>   -   www.ipeva-studio.com
<BLOCKED::http://www.ipeva-studio.com/> 

Ce message et toutes les pièces jointes sont confidentiels et établis à
l'intention exclusive de ses destinataires. Toute utilisation ou diffusion
non autorisée est interdite. Tout message électronique est susceptible
d'altération. IPeva décline toute responsabilité au titre de ce message s'il
a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce
message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 25/05/2011 à 13:18, Rob Morin a écrit :

Is the fact that I was previously running the snapshot from 25 March
adequate to meet this test?

From: Rob Morin [mailto:rmorin at blie-ent.com] 
Sent: Tuesday, May 24, 2011 10:50 AM
To: 'FreeSWITCH Users Help'
Subject: Re: [Freeswitch-users] Faxing problems if B leg offers T.38

I can, if someone can tell me where to get the snapshot.  I looked at
files.freeswitch.org and didn’t see one.

Prior to updating to the 5-17 snapshot, I was having the same problems with
the 3-25 snapshot that I was using.

Thank you,

Rob

From: David Ponzone [mailto:david.ponzone at ipeva.fr] 
Sent: Tuesday, May 24, 2011 1:47 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Faxing problems if B leg offers T.38

Rob,

following Yehavi's comment, could you downgrade your GIT version to a
previous version, like one month old ?

David Ponzone  Direction Technique

email: david.ponzone at ipeva.fr

tel:      01 74 03 18 97

gsm:   06 66 98 76 34

Service Client IPeva

tel:      0811 46 26 26

www.ipeva.fr <BLOCKED::http://www.ipeva.fr/>   -   www.ipeva-studio.com
<BLOCKED::http://www.ipeva-studio.com/> 

Ce message et toutes les pièces jointes sont confidentiels et établis à
l'intention exclusive de ses destinataires. Toute utilisation ou diffusion
non autorisée est interdite. Tout message électronique est susceptible
d'altération. IPeva décline toute responsabilité au titre de ce message s'il
a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce
message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 24/05/2011 à 02:59, Rob Morin a écrit :

David,

It isn’t the ATA. I’ve tried both the Grandstream HandyTone 502 and
Cisco/Linksys SPA 2102. Same story in both cases.

I had my carrier help me troubleshoot and we can see the SIP request from
the carrier come in. When T.38 is enabled, it is forwarded to the A leg, but
the response from the A leg isn’t forwarded back to the B leg. I can produce
traces that show this.

When T.38 isn’t enabled, the B leg is sending a T.38 reinvite. FS doesn’t
respond or forward it. So the connection dies.  I have every reason to
believe that I’d be able to send the fax if FS would respond with a 488
indicating T.38 is not acceptable. But instead, all I get is silence. Again,
I can produce traces that demonstrate this.

There’s another similar email  trail out there,
http://freeswitch-users.2379917.n2.nabble.com/T-38-via-UPDATE-request-td3821
994.html, but I’m not certain that they’re related.

Thank you for your help!
Rob

From: David Ponzone [mailto:david.ponzone at ipeva.fr] 
Sent: Monday, May 23, 2011 6:11 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Faxing problems if B leg offers T.38

Rob,

perhaps you should not consider T38 is 100% interoperable.

You may tell us what ATA is that, because some of them are nice piece of
junk.

David Ponzone  Direction Technique

email: david.ponzone at ipeva.fr

tel:      01 74 03 18 97

gsm:   06 66 98 76 34

Service Client IPeva

tel:      0811 46 26 26

www.ipeva.fr <BLOCKED::http://www.ipeva.fr/>   -   www.ipeva-studio.com
<BLOCKED::http://www.ipeva-studio.com/> 

Ce message et toutes les pièces jointes sont confidentiels et établis à
l'intention exclusive de ses destinataires. Toute utilisation ou diffusion
non autorisée est interdite. Tout message électronique est susceptible
d'altération. IPeva décline toute responsabilité au titre de ce message s'il
a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce
message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 23/05/2011 à 20:51, Rob Morin a écrit :

I’m having problems faxing if the B leg offers T.38.  Several scenarios, but
always the same result.

First, the architecture

FAX à ATA (T.38 optional) à FS à Carrier  à Destination (Possibly another
carrier (PSTN) and the fax machine)

On my ATA, T.38 is enabled (Auto Detect).

If the destination supports T.38, the Carrier will offer it to Freeswitch.
If the Destination doesn’t support T.38, the B leg doesn’t offer it and the
faxes go through.

I’ve set Freeswitch as:

      <action application="set" data="fax_enable_t38=true"/>

      <action application="export" data="t38_passthru=true"/> 

When that’s the case, and the B leg offers T.38, Freeswitch passes through
the offer and the ATA responds, 3 times. But the response never gets sent to
the B leg, so it terminates the call after about 30 seconds.

When I set Freeswitch as:

      <action application="set" data="fax_enable_t38=false"/>

The B leg still offers T.38 if its other side is capable. Freeswitch doesn’t
pass the offer through and the B leg terminates the call after about 30
seconds.

I’m running on a recent git ( FreeSWITCH Version 1.0.head (git-86d757d
2011-05-17 22-51-47 -0500) ).

I’ve had no success attempting to configure FS as a gateway. Frankly, T.38
“passthrough” has had the most success, mostly when the other ends aren’t
T.38 capable and it stays in G711u.

Is there something else I need to do to enable T.38 in passthrough mode? 

Thank you,
Rob Morin

PS – I can provide tcpdumps of this, or whatever else is necessary.

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110602/2e994547/attachment-0001.html 