[Freeswitch-users] please help!!! how to set flag 'endconf' in bridging conference
Nandy Dagondon
gcd at i.ph
Fri Jul 1 06:12:11 MSD 2011
hi michael,
pls disregard me last post. i just digged the "endconf" parameter. i'll try
it. tks.
On Fri, Jul 1, 2011 at 10:04 AM, Nandy Dagondon <gcd at i.ph> wrote:
> hi michael,
>
> i'd like to have that feature, too, because our telco has an unusual line
> signalling - it only tear down the connection when the A-party hangs up
> first (Clear Forward). if i transfer the callee to the conference, the
> telco line remains off-hook forever. as an interim solution, i'm using the
> terminate_on_silence parameter.
>
> -nandy
>
> On Fri, Jul 1, 2011 at 9:29 AM, ran zhang <rzhang at gosilverplus.com> wrote:
>
>> I attached the section in my dialplan that handles the bridging
>> conference, when the first user (just say user 99) dials '20', he will
>> invite user 10 to join conference, the conference will only be established
>> if user 10 accepts the invitation, after this, other users can join the
>> conference by dialing '20'.
>>
>> I want that if the first user (user 99 in this case) or the user
>> been invited (user 10 in this case) leaves the conference, no matter how
>> many people are still in the conference, it will close down the
>> conference. so i'm trying to use the 'endconf' flag, but apparently it is
>> not valid syntax for bridging conference as I get a config error while
>> running. If I take out the '+flags{endconf} ', i wont get a config error
>> while running, but then conference will only close down when there is 1
>> person left.
>>
>> I have also tried creating 2 difference conference profiles, one
>> profile has the 'endconf' set in the 'member-flags', one profiles doesnt
>> have 'endconf' set, so user99 and user20 joins the 20 at profile1conference, and other users joins the 20 at profile2conference, that doesnt seem to work neither. I have pasted
>> conference.conf.xml file as well for ur review.
>>
>>
>> <include>
>> <context name="test">
>> <extension name="global" continue="true">
>> <condition>
>> </condition>
>> </extension>
>>
>> <extension name="conf">
>> <condition field="destination_number" expression="^(20)$" > </condition>
>> <action application="answer"/>
>> <action application="conference" data="bridge:20 at default+flags{endconf}:user/10"/>
>> <action application="conference" data="20 at default"/>
>> </condition>
>> </extension>
>> </context>
>> </include>
>>
>>
>>
>>
>>
>> On 6/30/2011 6:16 PM, Michael Collins wrote:
>>
>> Please put this information on pastebin and reply to the list so that we
>> can all discuss it.
>> -MC
>>
>> On Thu, Jun 30, 2011 at 1:51 PM, ran zhang <rzhang at gosilverplus.com>wrote:
>>
>>> Mr Collins:
>>>
>>> I attached the section in my dialplan that handles the bridging
>>> conference, when the first user (just say user 99) dials '20', he will
>>> invite user 10 to join conference, the conference will only be established
>>> if user 10 accepts the invitation, after this, other users can join the
>>> conference by dialing '20'.
>>>
>>> I want that if the first user (user 99 in this case) or the user
>>> been invited (user 10 in this case) leaves the conference, no matter how
>>> many people are still in the conference, it will close down the
>>> conference. so i'm trying to use the 'endconf' flag, but apparently it is
>>> not valid syntax for bridging conference as I get a config error while
>>> running. If I take out the '+flags{endconf} ', i wont get a config error
>>> while running, but then conference will only close down when there is 1
>>> person left.
>>>
>>> I have also tried creating 2 difference conference profiles, one
>>> profile has the 'endconf' set in the 'member-flags', one profiles doesnt
>>> have 'endconf' set, so user99 and user20 joins the 20 at profile1conference, and other users joins the 20 at profile2conference, that doesnt seem to work neither. I have pasted
>>> conference.conf.xml file as well for ur review.
>>>
>>>
>>> <include>
>>> <context name="test">
>>> <extension name="global" continue="true">
>>> <condition>
>>> </condition>
>>> </extension>
>>>
>>> <extension name="conf">
>>> <condition field="destination_number" expression="^(20)$" > </condition>
>>> <action application="answer"/>
>>> <action application="conference" data="bridge:20 at default+flags{endconf}:user/10"/>
>>> <action application="conference" data="20 at default"/>
>>> </condition>
>>> </extension>
>>> </context>
>>> </include>
>>>
>>>
>>> <configuration name="conference.conf" description="Audio Conference">
>>> <!-- Advertise certain presence on startup . -->
>>> <advertise>
>>> <room name="3001@$${domain}" status="FreeSWITCH"/>
>>> </advertise>
>>>
>>> <!-- These are the default keys that map when you do not specify a caller control group -->
>>> <!-- Note: none and default are reserved names for group names. Disabled if dist-dtmf member flag is set. -->
>>> <caller-controls>
>>> <group name="default">
>>> <control action="mute" digits="0"/>
>>> <control action="deaf mute" digits="*"/>
>>> <control action="energy up" digits="9"/>
>>> <control action="energy equ" digits="8"/>
>>> <control action="energy dn" digits="7"/>
>>> <control action="vol talk up" digits="3"/>
>>> <control action="vol talk zero" digits="2"/>
>>> <control action="vol talk dn" digits="1"/>
>>> <control action="vol listen up" digits="6"/>
>>> <control action="vol listen zero" digits="5"/>
>>> <control action="vol listen dn" digits="4"/>
>>> <control action="hangup" digits="#"/>
>>> </group>
>>> </caller-controls>
>>>
>>> <!-- Profiles are collections of settings you can reference by name. -->
>>> <profiles>
>>> <!--If no profile is specified it will default to "default"-->
>>> <profile name="default">
>>> <!-- Domain (for presence) -->
>>> <param name="domain" value="$${domain}"/>
>>> <!-- Sample Rate-->
>>> <param name="rate" value="8000"/>
>>> <!-- Number of milliseconds per frame -->
>>> <param name="interval" value="20"/>
>>> <!-- Energy level required for audio to be sent to the other users -->
>>> <param name="energy-level" value="300"/>
>>>
>>> <!--Can be | delim of waste|mute|deaf|dist-dtmf waste will always transmit data to each channel
>>> even during silence. dist-dtmf propagates dtmfs to all other members, but channel controls
>>> via dtmf will be disabled. -->
>>> <param name="member-flags" value="dist-dtmf"/>
>>>
>>> <!-- Name of the caller control group to use for this profile -->
>>> <!-- <param name="caller-controls" value="some name"/> -->
>>> <!-- TTS Engine to use -->
>>> <!--<param name="tts-engine" value="cepstral"/>-->
>>> <!-- TTS Voice to use -->
>>> <!--<param name="tts-voice" value="david"/>-->
>>>
>>> <!-- If TTS is enabled all audio-file params beginning with -->
>>> <!-- 'say:' will be considered text to say with TTS -->
>>> <!-- Override the default path here, after which you use relative paths in the other sound params -->
>>> <!-- Note: The default path is the conference's first caller's sound_prefix -->
>>> <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
>>> <!-- File to play to acknowledge succees -->
>>> <!--<param name="ack-sound" value="beep.wav"/>-->
>>> <!-- File to play to acknowledge failure -->
>>> <!--<param name="nack-sound" value="beeperr.wav"/>-->
>>> <!-- File to play to acknowledge muted -->
>>> <!-- Conference pin -->
>>> <!--<param name="pin" value="12345"/>-->
>>> <!-- Default Caller ID Name for outbound calls -->
>>> <param name="caller-id-name" value="$${outbound_caller_name}"/>
>>> <!-- Default Caller ID Number for outbound calls -->
>>> <param name="caller-id-number" value="1234"/>
>>> <!-- Suppress start and stop talking events -->
>>> <!-- <param name="suppress-events" value="start-talking,stop-talking"/> -->
>>> <!-- enable comfort noise generation -->
>>> <param name="comfort-noise" value="true"/>
>>> <!-- Uncomment auto-record to toggle recording every conference call. -->
>>> <!-- Another valid value is shout://user:pass@server.com/live.mp3 -->
>>> <!--
>>> <param name="auto-record" value="$${recordings_dir}/${conference_name}_${strftime(%Y-%m-%d-%H-%M-%S)}.wav"/>
>>> -->
>>> </profile>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 6/30/2011 1:07 PM, Michael Collins wrote:
>>>
>>> Can you pastebin exactly what you are doing to establish the call?
>>> Including any relevant dialplan entries. Also, if you have modified
>>> conference.conf.xml we would like to see that also.
>>>
>>> -MC
>>>
>>> On Thu, Jun 30, 2011 at 10:59 AM, ran zhang <rzhang at gosilverplus.com>wrote:
>>>
>>>> hi all:
>>>>
>>>> I'm trying to creating a conference, so when first member enters the
>>>> conference, he has to invite another members
>>>> and have at least 1 other member to join to have the conference
>>>> established, so i'm
>>>> using bridging conference.
>>>>
>>>> I need this conference to be terminated when the original creator of the
>>>> conference leaves no matter how many members are still left in the
>>>> conference.
>>>>
>>>> i'm trying to set 'endconf' flag in a bridging conference using
>>>> 'bridge:confname+flag{endconf}:user/10',
>>>> so it wil invite user extension 10, but its giving me config error while
>>>> running.
>>>>
>>>> can someone tell me what to do to solve this problem or get around? the
>>>> key
>>>> is i only want the original member to be able to terminate the
>>>> conference
>>>> when he leaves, not other members assuming there are at least 2 members.
>>>>
>>>>
>>>> _______________________________________________
>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>> _______________________________________________
>>> Join us at ClueCon 2011, Aug 9-11, Chicagohttp://www.cluecon.com 877-7-4ACLUE
>>>
>>> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>>>
>>>
>>>
>>
>>
>> _______________________________________________
>> Join us at ClueCon 2011, Aug 9-11, Chicago
>> http://www.cluecon.com 877-7-4ACLUE
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110701/c5928692/attachment-0001.html
More information about the FreeSWITCH-users
mailing list