[Freeswitch-users] Issue adding a SIP Gateway

Tue Dec 20 00:05:43 MSK 2011

Alex,

I've seen that as well... but where I figured it was part of the example.xml gateway I didn't pay much mind. I have, however, renamed the example.xml to example.xml.noload, stopped and started the daemon, and attempted to reload the external profile within freeswitch... and it's STILL loading the example gateway... and will not load iptel,

I haven't ever touched the external.xml, but I'm wondering if maybe it needed to be edited? Or perhaps the freeswitch install put yet another location in that this setup that it might be looking to?? Really lost at this point... don't know how it's loading the example gateway when it's been renamed (even renamed the example.xml in /usr/src/freeswitch* for S&Gs)

From: Alex Crow [mailto:acrow at integrafin.co.uk]
Sent: Monday, December 19, 2011 12:51 PM
To: Ryan Watkins
Cc: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Issue adding a SIP Gateway

Ryan,

I see this:

2011-12-19 12:28:30.388149 [DEBUG] sofia.c:1736 Launching worker thread for external
2011-12-19 12:28:30.388202 [ERR] sofia.c:2490 ERROR: password param is REQUIRED!

This could actually be from your "example.com" gateway, it is indeed an error relating to gateway defs.

I suggest you delete that gateway or move it to example.com.noload (or the like). It could be stopping your proper gateway from loading. I'm sure you don't need it anyway.

Also check, if you've edited your external.xml file that you haven't got messed up tags before the include of external/*.xml.

Cheers

Alex

On 19/12/11 20:38, Ryan Watkins wrote:
Here's the log file... thanks again Alex and all

From: Alex Crow [mailto:acrow at integrafin.co.uk]
Sent: Monday, December 19, 2011 11:22 AM
To: FreeSWITCH Users Help
Cc: Ryan Watkins
Subject: Re: [Freeswitch-users] Issue adding a SIP Gateway

OK,

As long as those "funny quotes" in your last post aren't present in your XML file I can't see what is the problem. I had an issue copying dialplans from the web with these, had to go through and change them all by hand.

If you shut down freeswitch, clear your logfile, and start it again, can you post the contents of /opt/freeswitch/log/freeswitch.log to the list (or to pastebin etc and link here).

There must be something in the logs.

BTW you should not need to change things in /usr/src/*, once you've installed that doesn't make any difference.

Cheers

Alex

On 19/12/11 18:36, Ryan Watkins wrote:
Thanks for the reply Alex,

I followed the example in the FreeSWITCH 1.0.6 book for iptel, which is as follows:
<include>
  <gateway name="iptel">
  <param name="username" value="username"/> (yes, I supplied my iptel username in this line)
  <param name="password" value="password"/> (again, I supplied my iptel password on this line)
  <param name="realm" value="iptel.org"/>
  <!--iptel.org requires a 'proxy' parameter -->
  <param name="proxy" value="sip.iptel.org"/>
  </gateway>
</include>

I've checked the file permissions and changed them so that all users have rwx for the iptel.org.xml file; as well as every folder up to /external for both /usr/src/freeswitch and the /opt/freeswitch paths

I've also changed the iptel.org.xml files in those paths to the example that you linked from the wiki

However, I'm still getting the same result.... Any other suggestions?

Thanks again!

From: Alex Crow [mailto:acrow at integrafin.co.uk]
Sent: Sunday, December 18, 2011 2:09 AM
To: FreeSWITCH Users Help
Cc: Ryan Watkins
Subject: Re: [Freeswitch-users] Issue adding a SIP Gateway

On 16/12/11 01:05, Ryan Watkins wrote:
I did run the" sofia profile external restart reloadxml" command.... It didn't load the new gateway, so that's why I tried registering the gateway specifically.

Ryan,

Did you follow this example: http://wiki.freeswitch.org/wiki/Provider_Configuration:_iptel and replace the usename and password with your own?

Check that the permissions on the new XML file allow it to be read by the user freeswitch is running as.

Also double-check your closing tags on the file. This can cause your gateway to be skipped, hence the "invalid gateway" when you try to use it.

Cheers

Alex

--

This message is intended only for the addressee and may contain

confidential information.  Unless you are that person, you may not

disclose its contents or use it in any way and are requested to delete

the message along with any attachments and notify us immediately.

"Transact" is operated by Integrated Financial Arrangements plc

Domain House, 5-7 Singer Street, London  EC2A 4BQ

Tel: (020) 7608 4900 Fax: (020) 7608 5300

(Registered office: as above; Registered in England and Wales under number: 3727592)

Authorised and regulated by the Financial Services Authority (entered on the FSA Register; number: 190856)

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

_________________________________________________________________________

Professional FreeSWITCH Consulting Services:

consulting at freeswitch.org<mailto:consulting at freeswitch.org>

http://www.freeswitchsolutions.com

Official FreeSWITCH Sites

http://www.freeswitch.org

http://wiki.freeswitch.org

http://www.cluecon.com

FreeSWITCH-users mailing list

FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users

http://www.freeswitch.org

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20111219/d14259c7/attachment-0001.html 