[Freeswitch-users] Mod_rad_auth issue for FS working with FreeRadius server
fieldpeak
fieldpeak at gmail.com
Fri Aug 5 12:12:46 MSD 2011
Hi Tihomir,
Thanks for your advise, i've added below to rad_auth.conf.xml (vsas
section), as well as tried auth-type to 0(local) and 1(system), however, the
issue still exist.
<param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
direction="in"/>
<param name="Login-User" id="6" value="1" pec="0" expr="0" direction="in"/>
<param name="Auth-Type" id="1000" value="0" pec="0" expr="0"
direction="in"/>
FreeRadius output:
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "Q?²Êà ëê¢p?¤F?+Õa"
[pap] Using clear text password "1111"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check
the shared secret on the server and the NAS!
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> 1001
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 38 for 1 seconds
Regards,
Charles
2011/8/5 Tihomir Culjaga <tculjaga at gmail.com>
> add to rad_auth.conf.xml
>
> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
> direction="in"/>
> <param name="Login-User" id="6" value="1" pec="0" expr="0" direction="in"/>
>
>
>
> as for Auth Type im not sure if you need it ... this is up to your server.
> According to dictionary file you need to set it as follows:
>
> <param name="Auth-Type" id="1000" value="?" pec="0" expr="0"
> direction="in"/>
>
> the value (set as ?) is one of the folowing. Again, not sure what is
> required by your server.
>
> VALUE Auth-Type Local 0
> VALUE Auth-Type System 1
> VALUE Auth-Type SecurID 2
> VALUE Auth-Type Crypt-Local 3
> VALUE Auth-Type Reject 4
>
> #
> # Cistron extensions
> #
> VALUE Auth-Type Pam 253
> VALUE Auth-Type Accept 254
>
>
>
> regards,
> Tihomir.
>
>
>
> On Wed, Aug 3, 2011 at 6:32 AM, fieldpeak <fieldpeak at gmail.com> wrote:
>
>> Hi Tihomir,
>>
>> Sorry, i missed your mail in gmail before, just now saw it, and after
>> using your dictionary.all, the dictionary issue was resolved, very
>> appreciated for your kindly help! however, it did not fully functional yet,
>>
>> Attached are configuration files that i used, when i dial 601 to trigger
>> to auth, the freeradius server shows log below, the supecious log is the
>> value User-Password, it should be '1111' that i've set in the mysql db of
>> freeradisu server for the user 1001 .
>>
>> i searched in google, for "known good" password issue, i suggest change
>> user-password to cleartext-password, however, i did not find where it is.
>> and also the Auth-Type, where to configure it...
>>
>> Freeradius server log:
>>
>> rad_recv: Access-Request packet from host 127.0.0.1 port 52684, id=49,
>> length=111
>> User-Name = "1001"
>> User-Password = "?\210\365@\263\t\306\343\243iT?\311C\t\002"
>> Called-Station-Id = "888"
>> h323-conf-id = "749d2b5a-16ad-48e4-af58-24011949d1b5"
>> Calling-Station-Id = "1001"
>> NAS-Port = 0
>> NAS-IP-Address = 127.0.0.1
>> # Executing section authorize from file
>> /usr/local/etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> [auth_log] expand:
>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d ->
>> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20110803
>> [auth_log]
>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
>> expands to /usr/local/var/log/radius/radacct/
>> 127.0.0.1/auth-detail-20110803
>> [auth_log] expand: %t -> Wed Aug 3 12:06:33 2011
>> ++[auth_log] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [suffix] No '@' in User-Name = "1001", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [eap] No EAP-Message, not doing EAP
>> ++[eap] returns noop
>> ++[unix] returns notfound
>> ++[files] returns noop
>> [sql] expand: %{User-Name} -> 1001
>> [sql] sql_set_user escaped user --> '1001'
>> rlm_sql (sql): Reserving sql socket id: 4
>> [sql] expand: SELECT id, username, attribute, value, op FROM
>> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
>> -> SELECT id, username, attribute, value, op FROM
>> radcheck WHERE username = '1001' ORDER BY id
>> [sql] expand: SELECT groupname FROM radusergroup
>> WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
>> groupname FROM radusergroup WHERE username =
>> '1001' ORDER BY priority
>> rlm_sql (sql): Released sql socket id: 4
>> [sql] User 1001 not found
>> ++[sql] returns notfound
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> [pap] WARNING! No "known good" password found for the user.
>> Authentication may fail because of this.
>> ++[pap] returns noop
>> ERROR: No authenticate method (Auth-Type) found for the request: Rejecting
>> the user
>> Failed to authenticate the user.
>> WARNING: Unprintable characters in the password. Double-check the
>> shared secret on the server and the NAS!
>> Using Post-Auth-Type Reject
>> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>> +- entering group REJECT {...}
>> [attr_filter.access_reject] expand: %{User-Name} -> 1001
>> attr_filter: Matched entry DEFAULT at line 11
>> ++[attr_filter.access_reject] returns updated
>> Delaying reject of request 8 for 1 seconds
>> Going to the next request
>> Waking up in 0.9 seconds.
>> Sending delayed reject for request 8
>> Sending Access-Reject of id 49 to 127.0.0.1 port 52684
>> Waking up in 4.9 seconds.
>> Cleaning up request 8 ID 49 with timestamp +7674
>> Ready to process requests.
>> WARNING! No "known good" password found for the user
>>
>> Regards,
>> Charles
>>
>>
>> 2011/8/3 Tihomir Culjaga <tculjaga at gmail.com>
>>
>>> did u use the dictionary i have attached ?
>>>
>>>
>>> On Tue, Aug 2, 2011 at 10:08 AM, fieldpeak <fieldpeak at gmail.com> wrote:
>>>
>>>> i tried change to 'h323-conf-id' to 'h323-call-origin' in
>>>> 02_unitest_rad-ANI-auth.xml, rad_auth.conf.xml, however, it still prompt
>>>> '[ERR] mod_rad_auth.c:428 Unknown attribute: key:h323-conf-id, not
>>>> found in dictionary', so where the mod_rad_auth read out the 'h323-conf-id'?
>>>> very very strange, which dictionary it was using...
>>>>
>>>> Regards,
>>>> Charles
>>>>
>>>>
>>>> 2011/8/2 fieldpeak <fieldpeak at gmail.com>
>>>>
>>>>> Hi Tihomir,
>>>>>
>>>>> Finally the answer coming, i see the hope, thanks for your reply, :)
>>>>>
>>>>> As your advise, i only use one attribute(h323-conf-id) in my dialplan,
>>>>> and only one attribute(h323-conf-id) in rad_auth.conf.xml, and using the
>>>>> attached dictionary (from ciso) which contains this attribute, however, it
>>>>> still prompt 'unknown attribute', so i suspected if it was reading
>>>>> /usr/local/etc/radiusclient/dictionary, so i copy the same dictionary to
>>>>> /usr/local/freeswitch/radius/, it did not any help at all... very strange...
>>>>>
>>>>> Log:
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set default_realm
>>>>> := .
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>> radius_timeout := 3.
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>> radius_retries := 2.
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>> radius_deadtime := 0.
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set bindaddr :=
>>>>> *.
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>> User-Name: 38516060333
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>> User-Password: 003282
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:396 ... radius:
>>>>> Called-station-Id: 16094191500
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:413 Handle attribute:
>>>>> h323-conf-id
>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:428 Unknown attribute:
>>>>> key:h323-conf-id, not found in dictionary
>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>> radius packet.
>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:546 An error occured
>>>>> during RADIUS Authentication(RC=-1)
>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:702 An error occured
>>>>> during radius authorization.
>>>>>
>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO AUTH_RESULT=)
>>>>>
>>>>>
>>>>>
>>>>> <extension name="unitest_rad-ANI-auth">
>>>>> <condition field="destination_number" expression="^601$">
>>>>> <!-- <action application="log" data="INFO Before Auth "/> -->
>>>>>
>>>>> <action inline="true" application="set" data="CALLID=
>>>>> h323-conf-id=${uuid}"/>
>>>>>
>>>>> <action inline="true" application="set" data="USERNAME=1001"/>
>>>>> <action inline="true" application="set" data="PASSWD=1111"/>
>>>>>
>>>>>
>>>>> <action application="sleep" data="2000"/>
>>>>> <action application="auth_function" data="in ${DIALED_NUMBER}, in
>>>>> ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>
>>>>> </condition>
>>>>> </extension>
>>>>>
>>>>>
>>>>>
>>>>> <configuration name="rad_auth.conf" description="radius
>>>>> authentification module">
>>>>> <settings>
>>>>>
>>>>> </settings>
>>>>>
>>>>> <client>
>>>>> <param name="authserver" value="127.0.0.1:1812:gateway"/>
>>>>> <param name="dictionary"
>>>>> value="/usr/local/etc/radiusclient/dictionary"/>
>>>>> <param name="seqfile" value="/var/run/radius.seq"/>
>>>>> <param name="mapfile"
>>>>> value="/usr/local/etc/radiusclient/port-id-map"/>
>>>>> <param name="default_realm" value=""/>
>>>>> <param name="radius_timeout" value="3"/>
>>>>> <param name="radius_retries" value="2"/>
>>>>> <param name="radius_deadtime" value="0"/>
>>>>> <param name="bindaddr" value="*"/>
>>>>> </client>
>>>>>
>>>>> <vsas>
>>>>>
>>>>>
>>>>> <param name="h323-conf-id" id="24" value="CALLID" pec="9" expr="1"
>>>>> direction="in"/>
>>>>>
>>>>> </vsas>
>>>>> </configuration>
>>>>>
>>>>>
>>>>>
>>>>> 2011/8/2 Tihomir Culjaga <tculjaga at gmail.com>
>>>>>
>>>>>> hi,
>>>>>>
>>>>>> dictionary.all is just the name of a file containing all attributes i
>>>>>> needed at that time.
>>>>>>
>>>>>> you can include other dictionaries by putting #INCLUDE <pathname> at
>>>>>> the end of the dictionary file you reference in rad_auth.conf.xml.
>>>>>> if the INCLUDE doesn't work, just append dictionary.cisco to your
>>>>>> dictionary file... and make your own file.
>>>>>>
>>>>>>
>>>>>> check inline comments down below...
>>>>>>
>>>>>>
>>>>>> T.
>>>>>>
>>>>>>
>>>>>> On Sun, Jul 31, 2011 at 10:46 AM, fieldpeak <fieldpeak at gmail.com>wrote:
>>>>>>
>>>>>>> Hello Gurus,
>>>>>>>
>>>>>>> i met a issue when using
>>>>>>> mod_rad_auth(http://wiki.freeswitch.org/wiki/Mod_rad_auth) to works
>>>>>>> with freeradius server+mysql for AAA, the details is below, Could
>>>>>>> anyone give any hints, Thanks in advance.
>>>>>>>
>>>>>>> i setup a dial plan "unitest_rad-ANI-auth" as wiki above, however,
>>>>>>> when i dialed 601 to trigger the dial plan, the console show errors,
>>>>>>> it looks "h323-conf-id" is not in the directory, then i tried to add
>>>>>>> this attribute to the dictionary, however, it does not help, in the
>>>>>>> wiki, it mentioned the rad_auth.conf.xml contains <param
>>>>>>> name="dictionary"
>>>>>>> value="/usr/local/etc/radiusclient/dictionary.all"/>, however i did
>>>>>>> not find the file "dictionary.all" at that directory, so i use
>>>>>>> dictionary. BTW, the freeradius server + mysql works well.
>>>>>>>
>>>>>>
>>>>>> i just appended the information needed into dictionary.all file...
>>>>>> (vendor and attribute definition).
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> console errors:
>>>>>>>
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 auth_function(in , in
>>>>>>> 38516060333, in 003282, out AUTH_RESULT)
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:301 allocate
>>>>>>> initial
>>>>>>> structure.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:313 initialzed
>>>>>>> configuration.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set authserver
>>>>>>> := 127.0.0.1:1812:gateway.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set dictionary
>>>>>>> := /usr/local/etc/radiusclient/dictionary.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set seqfile :=
>>>>>>> /var/run/radius.seq.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set mapfile :=
>>>>>>> /usr/local/etc/radiusclient/port-id-map.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> default_realm := .
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_timeout := 3.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_retries := 2.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_deadtime := 0.
>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set bindaddr :=
>>>>>>> *.
>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>>>> User-Name: 38516060333
>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>>>> User-Password: 003282
>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:391 ... radius:
>>>>>>> Called-station-Id is empty, ignoring...
>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:413 Handle
>>>>>>> attribute: h323-conf-id
>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:428 Unknown
>>>>>>> attribute:
>>>>>>> key:h323-conf-id, not found in dictionary
>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>>>> radius packet.
>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:546 An error occured
>>>>>>> during RADIUS Authentication(RC=-1)
>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:702 An error occured
>>>>>>> during radius authorization.
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO AUTH_RESULT=)
>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 AUTH_RESULT=
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>> billing_model=)
>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 billing_model=
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>> credit_amount=)
>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 credit_amount=
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO currency=)
>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 currency=
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>> preffered_lang=)
>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 preffered_lang=
>>>>>>>
>>>>>>> added below in the
>>>>>>> dictionary(/usr/local/etc/radiusclient/dictionary):
>>>>>>>
>>>>>>> ATTRIBUTE h323-conf-id 1008 string
>>>>>>>
>>>>>>
>>>>>> you need the vendor definition as well
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> dial plan:
>>>>>>> <extension name="unitest_rad-ANI-auth">
>>>>>>> <condition field="destination_number" expression="^601$">
>>>>>>> <action application="log" data="INFO Before Auth "/>
>>>>>>>
>>>>>>> <action inline="true" application="set"
>>>>>>> data="CALLID=h323-conf-id=${uuid}"/>
>>>>>>> <action inline="true" application="set"
>>>>>>> data="SERVICENUM=h323-prompt-id=${destination_number}"/>
>>>>>>> <action inline="true" application="set"
>>>>>>> data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/>
>>>>>>> <!-- <action inline="true" application="set"
>>>>>>> data="CALLINGNUMBER=${caller_id_number}"/> -->
>>>>>>> <action inline="true" application="set"
>>>>>>> data="CALLINGNUMBER=38516060333"/>
>>>>>>> <action inline="true" application="set"
>>>>>>> data="USERNAME=38516060333"/>
>>>>>>> <!-- <action inline="true" application="set"
>>>>>>> data="USERNAME=209354"/> -->
>>>>>>> <action inline="true" application="set" data="PASSWD=003282"/>
>>>>>>> <!-- <action inline="true" application="set"
>>>>>>> data="DIALED_NUMBER=16094191500"/> -->
>>>>>>>
>>>>>>> <action application="sleep" data="2000"/>
>>>>>>> <action application="auth_function" data="in ${DIALED_NUMBER},
>>>>>>> in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>>>
>>>>>>>
>>>>>>> <action application="log" data="INFO
>>>>>>> AUTH_RESULT=${AUTH_RESULT}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> billing_model=${billing_model}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> credit_amount=${credit_amount}"/>
>>>>>>> <action application="log" data="INFO currency=${currency}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> preffered_lang=${preffered_lang}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> credit_time=${credit_time}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> h323_ivr_duration=${h323_ivr_duration}"/>
>>>>>>> <action application="log" data="INFO
>>>>>>> return_code=${return_code}"/>
>>>>>>> <!-- <action application="execute_extension" data="AUTH XML
>>>>>>> default"/> -->
>>>>>>> </condition>
>>>>>>> </extension>
>>>>>>>
>>>>>>> radius_cdr.conf.xml:
>>>>>>> <configuration name="radius_cdr.conf" description="RADIUS CDR
>>>>>>> Configuration">
>>>>>>>
>>>>>>> <settings>
>>>>>>>
>>>>>>> <!-- location of the radius dictionary files -->
>>>>>>>
>>>>>>> <param name="dictionary"
>>>>>>> value="/usr/local/freeswitch/conf/radius/dictionary"/>
>>>>>>>
>>>>>>>
>>>>>> your dictionary file need to contain all the attributes you are trying
>>>>>> to use or to include other dictionaries (In this case dictionary.cisco) from
>>>>>> the dictionary file you are referencing here.
>>>>>>
>>>>>>
>>>>>>> <!-- number of retries for each server -->
>>>>>>>
>>>>>>> <param name="radius_retries" value="3"/>
>>>>>>>
>>>>>>> <!-- number of seconds to wait between retries -->
>>>>>>>
>>>>>>> <param name="radius_timeout" value="5"/>
>>>>>>>
>>>>>>> <!-- accounting servers, up to 8 allowed -->
>>>>>>>
>>>>>>> <!-- value is "host:port:secret", port is optional -->
>>>>>>>
>>>>>>> <!-- use IP ADDRESSES, not hostnames -->
>>>>>>>
>>>>>>> <param name="acct_server" value="127.0.0.1:1813
>>>>>>> :testing123"/>
>>>>>>>
>>>>>>>
>>>>>>> </settings>
>>>>>>>
>>>>>>> </configuration>
>>>>>>>
>>>>>>> the FS version:
>>>>>>> FreeSWITCH Version 1.0.head (git-492bc6b 2011-07-23 12-53-04 -0400)
>>>>>>>
>>>>>>> Regards,
>>>>>>> Charles
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>>
>>>>>>> FreeSWITCH-users mailing list
>>>>>>>
>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>> UNSUBSCRIBE:
>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>> http://www.freeswitch.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>
>>>>>> FreeSWITCH-users mailing list
>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> http://www.freeswitch.org
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>> http://www.cluecon.com 877-7-4ACLUE
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _______________________________________________
>> Join us at ClueCon 2011, Aug 9-11, Chicago
>> http://www.cluecon.com 877-7-4ACLUE
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Join us at ClueCon 2011, Aug 9-11, Chicago
> http://www.cluecon.com 877-7-4ACLUE
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110805/4ecff2e4/attachment-0001.html
More information about the FreeSWITCH-users
mailing list