[Freeswitch-users] cannot push a call into a fifo using executeAsync

[abubacker]

On Thursday 16 September 2010 02:57 PM, abubacker wrote:
> On Tuesday 14 September 2010 01:22 PM, abubacker wrote:
>    
>> Dear all,
>>        I just try to push a call in to the queue using execute function
>> and it works ,
>> but the same thing was not working for executeAsync function and dont know
>> why its behaving like this ? , can any one help me out!
>> Thanks in Advance !.
>>
>> $con->execute("fifo","urvq in"); # works
>> $con->executeAsync("fifo","urvq in"); # not works
>>
>> fs_cli
>> --------------
>> Dialplan: sofia/internal/1001 at 192.168.6.182 Regex (PASS) [socket
>> examples] ${destination_number}(235) =~ /^235$/ break=on-false
>> Dialplan: sofia/internal/1001 at 192.168.6.182 Action socket(127.0.0.1:8040)
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:119
>> (sofia/internal/1001 at 192.168.6.182) State Change CS_ROUTING ->   CS_EXECUTE
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_session.c:1039 Send
>> signal sofia/internal/1001 at 192.168.6.182 [BREAK]
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:341
>> (sofia/internal/1001 at 192.168.6.182) State ROUTING going to sleep
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:314
>> (sofia/internal/1001 at 192.168.6.182) Running State Change CS_EXECUTE
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:348
>> (sofia/internal/1001 at 192.168.6.182) State EXECUTE
>> 2010-09-14 11:50:59.789373 [DEBUG] mod_sofia.c:235
>> sofia/internal/1001 at 192.168.6.182 SOFIA EXECUTE
>> 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:157
>> sofia/internal/1001 at 192.168.6.182 Standard EXECUTE
>> EXECUTE sofia/internal/1001 at 192.168.6.182 socket(127.0.0.1:8040)
>> 2010-09-14 11:50:59.799364 [DEBUG] switch_ivr.c:551
>> sofia/internal/1001 at 192.168.6.182 Command Execute answer()
>> EXECUTE sofia/internal/1001 at 192.168.6.182 answer()
>> 2010-09-14 11:50:59.809359 [DEBUG] sofia_glue.c:2682 AUDIO RTP
>> [sofia/internal/1001 at 192.168.6.182] 192.168.6.182 port 20780 ->
>> 192.168.6.163 port 8000 codec: 8 ms: 20
>> 2010-09-14 11:50:59.809359 [DEBUG] switch_rtp.c:1430 Starting timer
>> [soft] 160 bytes per 20ms
>> 2010-09-14 11:50:59.810360 [DEBUG] sofia_glue.c:2892 Set 2833 dtmf send
>> payload to 101
>> 2010-09-14 11:50:59.810360 [DEBUG] sofia_glue.c:2897 Set 2833 dtmf
>> receive payload to 101
>> 2010-09-14 11:50:59.810360 [DEBUG] mod_sofia.c:677 Local SDP
>> sofia/internal/1001 at 192.168.6.182:
>> v=0
>> o=FreeSWITCH 1284429879 1284429880 IN IP4 192.168.6.182
>> s=FreeSWITCH
>> c=IN IP4 192.168.6.182
>> t=0 0
>> m=audio 20780 RTP/AVP 8 101
>> a=rtpmap:8 PCMA/8000
>> a=rtpmap:101 telephone-event/8000
>> a=fmtp:101 0-16
>> a=silenceSupp:off - - - -
>> a=ptime:20
>> a=sendrecv
>>
>> 2010-09-14 11:50:59.810360 [DEBUG] switch_core_session.c:658 Send signal
>> sofia/internal/1001 at 192.168.6.182 [BREAK]
>> 2010-09-14 11:50:59.810360 [DEBUG] switch_channel.c:2542
>> (sofia/internal/1001 at 192.168.6.182) Callstate Change RINGING ->   ACTIVE
>> 2010-09-14 11:50:59.811360 [DEBUG] sofia.c:4318 Channel
>> sofia/internal/1001 at 192.168.6.182 entering state [completed][200]
>> 2010-09-14 11:50:59.811360 [NOTICE] mod_dptools.c:746 Channel
>> [sofia/internal/1001 at 192.168.6.182] has been answered
>> 2010-09-14 11:50:59.812361 [DEBUG] switch_core_session.c:877 Send signal
>> sofia/internal/1001 at 192.168.6.182 [BREAK]
>> 2010-09-14 11:50:59.833391 [DEBUG] sofia.c:4318 Channel
>> sofia/internal/1001 at 192.168.6.182 entering state [ready][200]
>>
>>
>>
>>
>>      
> Did any one come across a scenario like this ?
>
>    
Pleae tell me that why cannot we use Async operation to push a call into 
the queue

-- 
Best regards,
N.Abubacker ,
Associate system engineer ,
bk systems pvt ltd ,
Ph : 9144-43902701

Disclaimer: http://www.bksystems.co.in/email-policy