[Freeswitch-users] Struggling with installing.

Sun Sep 26 08:48:10 PDT 2010

Peter, what version of osx and xCode are you on to get such a clean
install? I have 10.6.4 and downloaded xCode 3.2.4 a few hours before I
downloaded the FS git which was Thursday. So I had the latest of both.
It took until Saturday to get a clean compile due to the problems below.
BTW, this was testing on an iMac but I plan to move it to a Mac Mini
after I am done finalizing on the Linux box..

On 09/26/2010 12:12 AM, Peter Schrock wrote:
> All I did was change the string.h code and it build for me, seems like
> there are superfluous steps. Just change the code.
> 
> On Sep 25, 2010, at 9:08 AM, Steve Underwood <steveu at coppice.org> wrote:
> 
>>  Hi Mario,
>>
>> Your installation procedure is truly bizarre. Appropriate versions of
>> LibTIFF and spandsp are in FreeSwitch. Why are you downloading versions
>> from elsewhere? On other platforms these versions are built and
>> installed automatically, as part of the standard FreeSwitch build
>> sequence. I have no idea why they are not building for you.
>>
>> Steve
>>
>>
>> On 09/25/2010 11:47 PM, Mario wrote:
>>> I think the thread title should have osx in it? Anyone see a problem or
>>> want to add something is welcome to mention it.
>>>
>>> Since David Ponzone says we need SPANDSP I struggled through it on osx
>>> 10.6.4. It took a lot of searching and trial and error. Here is the
>>> updated info to get a complete clean install with what looks like
>>> everything you need on osx. If I knew how to put things up on the wiki I
>>> would. Anyone is welcome to take this info:
>>>
>>> This may help someone install FS on osx 10.6.4 as of Sep
>>> 2010. I used the git version for this:
>>>
>>> A. If you want the git version download and install git from
>>> http://code.google.com/p/git-osx-installer/
>>>
>>> B. Download FreeSwitch using the online instructions or the book.
>>>
>>> INSTALL LIBTIFF NEEDED FOR LIBJPEG&  SPANDSP:
>>> 1. Download liftoff 3.9.4 from http://download.osgeo.org/libtiff/ and
>>> decompress into whatever directory you want. No need to put into same
>>> DIR as anything else.
>>> 2. cd ...../tiff-3.9.4
>>> 3. ./configure
>>>     make
>>>     make install
>>>
>>> 4. cd ..<- back to higher directory
>>>
>>> INSTALL LIBJPEG NEEDED FOR SPANDSP:
>>> IMPORTANT: Most searches will find libjpeg-6, DO NOT USE IT! It took
>>> several hours of trying to load it on osx and never got it to work. V7
>>> was a snap. See:
>>> http://proteus-tech.com/blog/cwt/install-pil-in-snow-leopard/
>>> 5. Download libjpeg at www.ijg.org/files/jpegsrc.v7.tar.gz
>>> 6. Double click to uncompress or tar zxvf jpegsrc.v7.tar.gz then move to
>>> directory you want. No need to put into same DIR as anything else.
>>> 7. cd .../jpeg-7
>>> 8. ./configure --enable-shared --enable-static
>>> 9. make
>>> 10. sudo make install
>>>
>>> 11. cd ..<- back to higher directory
>>>
>>> INSTALL SPANDSP
>>> 12. Download spandsp 0.0.6 from
>>> http://www.soft-switch.org/downloads/spandsp/
>>> 13. Double click to uncompress then move to directory you want. No need
>>> to put into same DIR as anything else.
>>> 13. cd .../spandsp 0.0.6
>>> 14 ./configure
>>> 15  make
>>> 16. make install
>>>
>>>
>>> FIX FLITE COMPILE PROBLEM (looks like David Ponzone can fix this see below).
>>> 17. cp /usr/include/string.h /freeswitch/libs/flite-1.3.99/include
>>> This is what is causing flite to fail during make. See these:
>>> http://lists.berlios.de/pipermail/festlang-talk/2008-June/001043.html
>>> http://www.clas.ufl.edu/users/mpanning/OSX.html
>>> 18. CD to /freeswitch/libs/flite-1.3.99/include
>>> 19. chmod +rw+rw+rw string.h<- So you can update the file.
>>> 20. Edit (in xCode) string.h, find "swab" and change line:
>>> void swab(const void * __restrict, void * __restrict, ssize_t);
>>>                to (comment the line):
>>> /*void swab(const void * __restrict, void * __restrict, ssize_t);*/
>>> 21. CD /freeswitch
>>> 22. Follow normal install instructions (bootstrap, config).
>>> 23. MAKE
>>> 24. SUDO MAKE INSTALL<- SUDO was required for this
>>>
>>> So far so good....
>>>
>>>
>>> On 09/24/10 11:49, David Ponzone wrote:
>>>> Mario,
>>>>
>>>> actually, no.
>>>> spandsp contains all basic codecs: G726, G722, ADPCM, GSM, LPC-10.
>>>>
>>>> David Ponzone  Direction Technique
>>>> email: david.ponzone at ipeva.fr<mailto:david.ponzone at ipeva.fr>
>>>> tel:      01 74 03 18 97
>>>> gsm:   06 66 98 76 34
>>>>
>>>> Service Client IPeva
>>>> tel:      0811 46 26 26
>>>> www.ipeva.fr<BLOCKED::http://www.ipeva.fr/>   -   www.ipeva-studio.com
>>>> <BLOCKED::http://www.ipeva-studio.com/>
>>>>
>>>> /Ce message et toutes les pièces jointes sont confidentiels et établis à
>>>> l'intention exclusive de ses destinataires. Toute utilisation ou
>>>> diffusion non autorisée est interdite. Tout message électronique est
>>>> susceptible d'altération. /*/IPeva/*/ décline toute responsabilité au
>>>> titre de ce message s'il a été altéré, déformé ou falsifié. Si vous
>>>> n'êtes pas destinataire de ce message, merci de le détruire
>>>> immédiatement et d'avertir l'expéditeur./
>>>> /
>>>> /
>>>>> On 09/24/10 10:09, Brian West wrote:
>>>>>> Don't build mod_flite on 10.5 for right now... or get the patch off
>>>>>> jira and apply it.. i haven't had time to reroll it.
>>>>>>
>>>>>>> On Sep 24, 2010, at 11:41 AM, Mario wrote:
>>>>>>> I am in the same boat, new to FreeSwitch, setup first on an old Linux
>>>>>>> box (going pretty well), with plans to go Mac Mini. I tried to install
>>>>>>> on OSX and first got the MOD_SPANDSP missing issue. Since I could not
>>>>>>> find a way to install that on OSX I took it out of the modules.conf to
>>>>>>> see how far I would get, thinking it's only for fax? But then I got the
>>>>>>> same error for flite you have below. Hopefully someone here may have
>>>>>>> already been through this and will shed some light on it. I am working
>>>>>>> on it right now and if I find anything I will post.
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-- 
*Mario*