[Freeswitch-users] FS not detecting public IP address change

Mon Oct 25 21:32:46 PDT 2010

:)  that was the first thing I did, but I get nothing; no keep alive
packets.

in the logfile at startup I see:

2010-10-26 10:19:45.484258 [INFO] switch_nat.c:410 Scanning for NAT
2010-10-26 10:19:45.485991 [DEBUG] switch_nat.c:167 Checking for PMP 1/5
2010-10-26 10:19:45.488575 [INFO] switch_nat.c:423 NAT detected type: pmp,
ExtIP: '203.xxx.xxx.xxx'
2010-10-26 10:19:45.490683 [DEBUG] switch_nat.c:256 NAT thread configured
2010-10-26 10:19:45.492180 [DEBUG] switch_nat.c:267 NAT thread started

And nat_map status shows me which ports have been forwarded and the external
ip address (which is sometimes wrong).  I also see this in the router gui.

But I never see the keep alive packets.

On Tue, Oct 26, 2010 at 3:13 PM, Rupa Schomaker <rupa at rupa.com> wrote:

> Just turn up console logging to level 7.
>
> /log 7 if using fs_cli
>
>
> On Mon, Oct 25, 2010 at 6:53 PM, Mark Campbell-Smith <
> mcampbellsmith at gmail.com> wrote:
>
>> Hi!
>>
>> How do I enable debugging to get the UPnP keep alive packets?
>>
>> Thanks!
>>
>> On Tue, Oct 26, 2010 at 1:15 AM, Rupa Schomaker <rupa at rupa.com> wrote:
>>
>>> I need the debug logging from the upnp stuff.  It should look something
>>> like:
>>>
>>> +OK log level 7 [7]
>>> freeswitch at internal> 2010-10-25 09:13:59.926861 [DEBUG] switch_nat.c:299
>>> got UPnP keep alive packet:
>>> NOTIFY * HTTP/1.1
>>> HOST:239.255.255.250:1900
>>> Cache-Control:max-age=60
>>> Location:http://192.168.1.1:5000/rootDesc.xml
>>> Server: Tomato UPnP/1.0 MiniUPnPd/1.4
>>> NT:urn:schemas-upnp-org:service:WANIPConnection:1
>>>
>>> USN:uuid:00000000-0000-0000-0000-000000000000::urn:schemas-upnp-org:service:WANIPConnection:1
>>> NTS:ssdp:alive
>>>
>>> I also run tomato and haven't had trouble with the upnp support so at
>>> least we have that part working.
>>>
>>> You should see the above keepalive appear periodically every 30s or so.
>>>  You should see another set of messages when you terminate the DSL
>>> connection and when that dsl connection comes back online.
>>>
>>> On Sat, Oct 23, 2010 at 5:36 PM, Mark Campbell-Smith <
>>> mcampbellsmith at gmail.com> wrote:
>>>
>>>> Hi!
>>>>
>>>> The router is a ASUS router but it is running the tomato firmware which
>>>> runs miniupnd.
>>>>
>>>> In the debug I see the message: 2010-10-24 08:02:59.178918 [DEBUG]
>>>> sofia.c:956 nua_i_outbound: unknown event 8: 101 NAT detected
>>>>
>>>> This is what I see below. I hope I enabled all debug messages.  I
>>>> thought I saw some xml type messages earlier, but not sure how I enabled
>>>> them.
>>>>
>>>> nta_outgoing: RTT is 67.958 ms
>>>> outbound(0xb6e07c00): NAT binding changed: [210.xx.xxx.xx]:5080 !=
>>>> [58.xxx.xx.xx]:5080
>>>> nua(0xb6e07c00): event i_outbound 102 NAT binding changed
>>>> nua: nua_application_event: entering
>>>> 2010-10-24 09:05:08.849525 [DEBUG] sofia.c:956 nua_i_outbound: unknown
>>>> event 8: 102 NAT binding changed
>>>>
>>>>
>>>> On Sun, Oct 24, 2010 at 1:08 AM, Rupa Schomaker <rupa at rupa.com> wrote:
>>>>
>>>>> btw: what router are you using?
>>>>>
>>>>>
>>>>> On Sat, Oct 23, 2010 at 9:06 AM, Rupa Schomaker <rupa at rupa.com> wrote:
>>>>>
>>>>>> In a upnp config, FS is depending on the router to notify it of the ip
>>>>>> address change.  It is possible the upnp message(s) aren't formatted as
>>>>>> expected.  If you turn on debug logging you'll get the upnp messages on the
>>>>>> console.  If you can pastebin the capture of those while dropping and
>>>>>> restarting the dsl connection I can maybe see if there is something obvious
>>>>>> going on.  The debug should also have messages related to the processing of
>>>>>> those upnp messages.
>>>>>>
>>>>>> On Sat, Oct 23, 2010 at 7:04 AM, Mark Campbell-Smith <
>>>>>> mcampbellsmith at gmail.com> wrote:
>>>>>>
>>>>>>> HI!
>>>>>>>
>>>>>>> I know this question must have been answered 100's of times....
>>>>>>>
>>>>>>> My adsl is a bit dodgy at the moment and tends to go up and down;
>>>>>>> which means I get assigned a new ip address from my ISP.  FS is nat'd behind
>>>>>>> a upnp capable router.
>>>>>>>
>>>>>>> The problem is that FS does not seem to be detecting the change.
>>>>>>> For both the internal and external profile, I have auto-nat setup, and I
>>>>>>> have tried stun and host settings in vars.conf.  When I issue a nat_map
>>>>>>> status I see my old IP address, and if I then issue a nat_map reinit, I see
>>>>>>> the new public IP address.  How can I get this to be automatic?
>>>>>>>
>>>>>>> Also the public IP address shown in the nat_map status is not the
>>>>>>> same as shown in the sofia profile internal/external printouts.  Why is
>>>>>>> this?
>>>>>>>
>>>>>>> I'm sure this is configuration, just not sure what to change.
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> FreeSWITCH-users mailing list
>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>> UNSUBSCRIBE:
>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>> http://www.freeswitch.org
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> -Rupa
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> -Rupa
>>>>>
>>>>> _______________________________________________
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>>
>>> --
>>> -Rupa
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
>
> --
> -Rupa
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101026/054e9bb6/attachment-0001.html 