[Freeswitch-users] mod_com_g729 licences used even without transcoding
David Ponzone
david.ponzone at ipeva.fr
Mon Oct 4 12:07:57 PDT 2010
Tony,
I'd rather have a consistent ptime between both legs, but I just
noticed that the new carrier I use does not honor my request to use a
ptime else than 20ms.
They just send back 20ms.
I will solve that with them sooner or later, but I suppose I am not
the only one in this situation.
David Ponzone Direction Technique
email: david.ponzone at ipeva.fr
tel: 01 74 03 18 97
gsm: 06 66 98 76 34
Service Client IPeva
tel: 0811 46 26 26
www.ipeva.fr - www.ipeva-studio.com
Ce message et toutes les pièces jointes sont confidentiels et établis
à l'intention exclusive de ses destinataires. Toute utilisation ou
diffusion non autorisée est interdite. Tout message électronique est
susceptible d'altération. IPeva décline toute responsabilité au titre
de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes
pas destinataire de ce message, merci de le détruire immédiatement et
d'avertir l'expéditeur.
Le 04/10/2010 à 19:34, Anthony Minessale a écrit :
> because it's based on G.711 the original codec used.
>
> It's a balance of latency to packet len.
>
> G.729 is poorly packetized at 20ms with only 10 bytes per payload.
>
> We can do something to make it work the way you want, but then I
> refuse to care if you get jittery calls because you are sending the
> wrong ptime in both directions.
>
>
>
> On Mon, Oct 4, 2010 at 12:18 PM, Jan Riedinger <riedinger at sns.eu>
> wrote:
>> I'm trying to do wholesale business with some dozen of
>> interconnects. It's
>> hopeless to force all customers/clients to use the same ptime - and
>> I think
>> there is no real reason to force them. I'm already happy, if they
>> all offer
>> the usage of g729 ;-). Often they pass through the calls themselves.
>>
>> BTW - I never understood, why 20 ms is the default frame size. In
>> this way
>> you have about 20 bytes payload and 40 bytes overhead for the TCP/
>> IP header,
>> which is a pretty bad ratio.
>>
>> BR
>> Jan
>>
>> Am 04.10.2010 18:56, schrieb David Ponzone:
>>
>> You could also check with your carrier why they dont accept the
>> custom ptime
>> you need, or normalize your customers' config.
>> I have a nice extension I made that denies calls if ptime is not
>> 20ms, with
>> early-neg or late-neg:
>> <extension name="check-ptime" continue="true">
>> <condition field="${sip_use_codec_ptime}" expression="20"
>> break="on-true"/>
>> <condition field="${ep_codec_string}" expression="@20i">
>> <anti-action application="respond" data="488"/>
>> <anti-action application="hangup" data="88"/>
>> </condition>
>> </extension>
>> David Ponzone Direction Technique
>> email: david.ponzone at ipeva.fr
>> tel: 01 74 03 18 97
>> gsm: 06 66 98 76 34
>> Service Client IP eva
>> tel: 0811 46 26 26
>> www.ipeva.fr - www.ipeva-studio.com
>> Ce message et toutes les pièces jointes sont confidentiels et
>> établis à
>> l'intention exclusive de ses destinataires. Toute utilisation ou
>> diffusion
>> non autorisée est interdite. Tout message électronique est
>> susceptible
>> d'altération. IPeva décline toute responsabilité au titre de ce
>> message s'il
>> a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire
>> de ce
>> message, merci de le détruire immédiatement et d'avertir
>> l'expéditeur.
>>
>>
>>
>> Le 04/10/2010 à 18:11, Jan Riedinger a écrit :
>>
>> I think, it would be a could idea to make it configurable, if
>> mod_com_g729
>> shall decode/encode the stream to re-packetize. With the current
>> behaviour
>> its usage is too expensive for me in respect of money needed for
>> licences
>> and CPU power. Most of my calls are calls are g729 to g729,
>> transcodeding is
>> needed only very rare.
>>
>>
>>
>> Am 04.10.2010 17:46, schrieb David Ponzone:
>>
>> I just discovered a situation like that.
>> If the ptime of leg A and leg B does not match, FS will decode/
>> encode the
>> stream in order to re-packetize (despite the fact that mod_com_g729
>> is
>> capable to re-packetize even without any license installed).
>> I was thinking that it was not optimal, but Anthony explained some
>> minutes
>> ago on #freeswitch why this was the preferred behaviour, despite
>> the quality
>> loss it causes.
>> David Ponzone Direction Technique
>> email: david.ponzone at ipeva.fr
>> tel: 01 74 03 18 97
>> gsm: 06 66 98 76 34
>> Service Client IP eva
>> tel: 0811 46 26 26
>> www.ipeva.fr - www.ipeva-studio.com
>> Ce message et toutes les pièces jointes sont confidentiels et
>> établis à
>> l'intention exclusive de ses destinataires. Toute utilisation ou
>> diffusion
>> non autorisée est interdite. Tout message électronique est
>> susceptible
>> d'altération. IPeva décline toute responsabilité au titre de ce
>> message s'il
>> a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire
>> de ce
>> message, merci de le détruire immédiatement et d'avertir
>> l'expéditeur.
>>
>>
>>
>> Le 04/10/2010 à 17:20, Jan Riedinger a écrit :
>>
>> Using http://files.freeswitch.org/g729/fsg729-158-installer really
>> did
>> fix the issue described below.
>>
>> However, it seems that the licence is used (up), even if there is no
>> transcoding needed. In my CDR I find for all calls, for which G729 is
>> involed at all,
>>
>> read_codec="G729", read_rate="8000", write_codec="G729",
>> write_rate="8000"
>>
>> Nevertheless, all of these calls use a G729 licence. Is there any
>> way to
>> find out, why mod_com_g729 wants to do any kind of transcoding?
>>
>> BR
>> Jan
>>
>> now the cod
>>
>> Am 04.10.2010 15:15, schrieb Brian West:
>>
>> http://files.freeswitch.org/g729/fsg729-158-installer
>>
>> Just the CDN doesn't have the index updated yet. That will fix
>> your issue.
>>
>> /b
>>
>> On Oct 4, 2010, at 8:09 AM, David Ponzone wrote:
>>
>> Nope, you have to install them manually.
>>
>> Current is v158.
>>
>> You can download it from the same place than 153, but via direct
>> URL only.
>>
>> It's still Beta I think.
>>
>> David Ponzone Direction Technique
>>
>> email: david.ponzone at ipeva.fr
>>
>> tel: 01 74 03 18 97
>>
>> gsm: 06 66 98 76 34
>>
>> Service Client IPeva
>>
>> tel: 0811 46 26 26
>>
>> www.ipeva.fr - www.ipeva-studio.com
>>
>> Ce message et toutes les pièces jointes sont confidentiels et
>> établis à
>> l'intention exclusive de ses destinataires. Toute utilisation ou
>> diffusion
>> non autorisée est interdite. Tout message électronique est
>> susceptible
>> d'altération. IPeva décline toute responsabilité au titre de ce
>> message s'il
>> a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire
>> de ce
>> message, merci de le détruire immédiatement et d'avertir
>> l'expéditeur.
>>
>>
>>
>> _______________________________________________
>>
>> FreeSWITCH-users mailing list
>>
>> FreeSWITCH-users at lists.freeswitch.org
>>
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>
>> http://www.freeswitch.org
>>
>> --
>> Jan Riedinger Phone : +49-30-39 73 19 66
>> Dipl.-Inf. | Managing Director Fax : +49-30-39 73 19 64
>> E-Mail: riedinger at sns.eu
>> SNS Consult GmbH ICQ : 163-237-041
>> Südwestkorso 49a MSN : jan at sns-consult.de
>> 14197 Berlin GERMANY Skype : Jan Riedinger
>>
>> AG Charlottenburg - HRB 71973
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>> --
>> Jan Riedinger Phone : +49-30-39 73 19 66
>> Dipl.-Inf. | Managing Director Fax : +49-30-39 73 19 64
>> E-Mail: riedinger at sns.eu
>> SNS Consult GmbH ICQ : 163-237-041
>> Südwestkorso 49a MSN : jan at sns-consult.de
>> 14197 Berlin GERMANY Skype : Jan Riedinger
>>
>> AG Charlottenburg - HRB 71973
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>> --
>> Jan Riedinger Phone : +49-30-39 73 19 66
>> Dipl.-Inf. | Managing Director Fax : +49-30-39 73 19 64
>> E-Mail: riedinger at sns.eu
>> SNS Consult GmbH ICQ : 163-237-041
>> Südwestkorso 49a MSN : jan at sns-consult.de
>> 14197 Berlin GERMANY Skype : Jan Riedinger
>>
>> AG Charlottenburg - HRB 71973
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
>
>
> --
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
> Twitter: http://twitter.com/FreeSWITCH_wire
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
> IRC: irc.freenode.net #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org
> googletalk:conf+888 at conference.freeswitch.org
> pstn:+19193869900
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101004/2bf38cfb/attachment-0001.html
More information about the FreeSWITCH-users
mailing list