[Freeswitch-users] FTDM Sangoma problem with latest git release

[Stephen Wilde]

Hi,
I have performed a git pull today and after rebuilding I have a mismatch
between level status reported by "wanrouter" and fs_cli command
"show_spans". I have 1 E1 connected but show_spans displays all phisical as
OK.

Here a screen capture:

Wanrouter Status:

Device name | Protocol | Station | Status        |
wanpipe10   | AFT TE1  | N/A     | Disconnected  |
wanpipe11   | AFT TE1  | N/A     | Disconnected  |
wanpipe12   | AFT TE1  | N/A     | Disconnected  |
wanpipe13   | AFT TE1  | N/A     | Disconnected  |
wanpipe14   | AFT TE1  | N/A     | Disconnected  |
wanpipe15   | AFT TE1  | N/A     | Disconnected  |
wanpipe16   | AFT TE1  | N/A     | Disconnected  |
wanpipe17   | AFT TE1  | N/A     | Disconnected  |
wanpipe18   | AFT TE1  | N/A     | Disconnected  |
wanpipe19   | AFT TE1  | N/A     | Disconnected  |
wanpipe1    | AFT TE1  | N/A     | Connected     |
wanpipe20   | AFT TE1  | N/A     | Disconnected  |
wanpipe21   | AFT TE1  | N/A     | Disconnected  |
wanpipe22   | AFT TE1  | N/A     | Disconnected  |
wanpipe23   | AFT TE1  | N/A     | Disconnected  |
wanpipe24   | AFT TE1  | N/A     | Disconnected  |
wanpipe2    | AFT TE1  | N/A     | Disconnected  |
wanpipe3    | AFT TE1  | N/A     | Disconnected  |
wanpipe4    | AFT TE1  | N/A     | Disconnected  |
wanpipe5    | AFT TE1  | N/A     | Disconnected  |
wanpipe6    | AFT TE1  | N/A     | Disconnected  |
wanpipe7    | AFT TE1  | N/A     | Disconnected  |
wanpipe8    | AFT TE1  | N/A     | Disconnected  |
wanpipe9    | AFT TE1  | N/A     | Disconnected  |



./fs_cli -x "ftdm sangoma_isdn show_spans"


span:trunk1 physical:OK signalling:UP
span:trunk2 physical:OK signalling:DOWN
span:trunk3 physical:OK signalling:DOWN
span:trunk4 physical:OK signalling:DOWN
span:trunk5 physical:OK signalling:DOWN
span:trunk6 physical:OK signalling:DOWN
span:trunk7 physical:OK signalling:DOWN
span:trunk8 physical:OK signalling:DOWN
span:trunk9 physical:OK signalling:DOWN
span:trunk10 physical:OK signalling:DOWN
span:trunk11 physical:OK signalling:DOWN
span:trunk12 physical:OK signalling:DOWN
span:trunk13 physical:OK signalling:DOWN
span:trunk14 physical:OK signalling:DOWN
span:trunk15 physical:OK signalling:DOWN
span:trunk16 physical:OK signalling:DOWN
span:trunk17 physical:OK signalling:DOWN
span:trunk18 physical:OK signalling:DOWN
span:trunk19 physical:OK signalling:DOWN
span:trunk20 physical:OK signalling:DOWN
span:trunk21 physical:OK signalling:DOWN
span:trunk22 physical:OK signalling:DOWN
span:trunk23 physical:OK signalling:DOWN
span:trunk24 physical:OK signalling:DOWN


I'm using a WANPIPE Release: 3.5.17

Thanks,

Stephen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101111/79287ace/attachment-0001.html