[Freeswitch-users] Does Freeswitch and Digium TE220 support E1 in Macau ?

[Steve Underwood]

Hi Tony,

I don't remember ever supporting an MFC/R2 install in Macau that was not 
a cross border link. Obviously, the cross border links use the China 
MFC/R2 protocol. I have no idea what variant of MFC/R2 might be used 
inside Macau. I suspect, for historic reasons, it might specifically not 
be the same as the China protocol. However, I have never seen 
documentation on Macau's MFC/R2 to really know. In other words, I have 
no idea if Macau is supported by the MFC/R2 software or not. Macau 
generally uses EuroISDN these days.

Regards,
Steve

On 11/04/2010 10:07 AM, Tony Tin wrote:
> Hi,
>
> Thanks everyone for your help.
>
> We're not working cross border. Our equipment is located in Macau. As 
> far as I know it is MFC/R2.
> If it is EuroISDN, should I use openzap or FreeTDN ?
>
> Thanks again for your help.
>
> Regards,
> Tony
>
>
> On Wed, Nov 3, 2010 at 11:10 PM, Steve Underwood <steveu at coppice.org 
> <mailto:steveu at coppice.org>> wrote:
>
>     Hi Tony,
>
>     Are you working cross border? E1s within Macau are usually EuroISDN.
>     Some going to China are MFC/R2.
>
>     Steve
>
>     On 11/03/2010 10:29 AM, Tony Tin wrote:
>     > Hi,
>     >
>     > Thanks a lot for all replies.
>     >
>     > Yes, it's MFC-R2, could you tell me which contries FreeTDM works as
>     > you know for reference.
>     >
>     > Regards,
>     > Tony
>     >
>     >
>     > On Wed, Nov 3, 2010 at 1:00 AM, Moises Silva
>     <moises.silva at gmail.com <mailto:moises.silva at gmail.com>
>     > <mailto:moises.silva at gmail.com <mailto:moises.silva at gmail.com>>>
>     wrote:
>     >
>     >     On Tue, Nov 2, 2010 at 9:37 AM, Jeffrey Leung
>     > <curriegrad2004 at gmail.com <mailto:curriegrad2004 at gmail.com>
>     <mailto:curriegrad2004 at gmail.com
>     <mailto:curriegrad2004 at gmail.com>>> wrote:
>     > > According to diginum, it should work
>     > >
>     > > http://www.digium.com/en/products/digital/te220.php
>     > >
>     > > On Mon, Nov 1, 2010 at 8:21 PM, Tony Tin
>     > <tony.tin at noahmedia.com.hk <mailto:tony.tin at noahmedia.com.hk>
>     <mailto:tony.tin at noahmedia.com.hk
>     <mailto:tony.tin at noahmedia.com.hk>>> wrote:
>     > >> Hi,
>     > >>
>     > >> Does Freeswitch and Digium TE220 support E1 in Macau ? If no, any
>     > >> alternative?
>     > >>
>     > >> Thanks for all input.
>     >
>     >     I think it's more important to know which telephony
>     signaling are you
>     >     talking about. PRI, MFC-R2?
>     >
>     >     If you have MFC-R2, FreeSWITCH/FreeTDM/ftmod_r2 uses openr2
>     which is
>     >     known to work in several countries. But I've not heard of
>     anyone using
>     >     it in China.
>     >
>     >     Moises Silva
>     >     Senior Software Engineer
>     >     Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100,
>     Markham ON
>     >     L3R 9R6 Canada
>     >     t. 1 905 474 1990 x128 | e. moy at sangoma.com
>     <mailto:moy at sangoma.com> <mailto:moy at sangoma.com
>     <mailto:moy at sangoma.com>>
>     >
>