[Freeswitch-users] Installing OpenZap?

[Tom Baldwin]

Gilles,

Sorry for the double post
In your openzap.conf
you need to have the span number like this

[span zt FXO]
name => OpenZAP
fxo-channel => 29

after the span type

Tom

On Thu, 2010-05-27 at 16:51 -0700, GillesToo wrote:
> Hello
> 
> I read the documents in the wiki, but my Dahdi + OpenZap + FXO card combo
> doesn't work, so I'd like to check if I made a mistake, overlooked
> something, or maybe some things have changed since Asterisk moved from
> Zaptel to Dahdi and the wiki hasn't been updated accordingly:
> 
> 1. Compiled Dahdi 2.3.0, and successfully loaded it:
> 
> # /etc/init.d/dahdi status
> ### Span  1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) RED
>   1 FXO        FXSKS       (SWEC: MG2)  RED
>   
> 2. vi /usr/local/freeswitch/conf/zt.conf: Nothing to do here, apparently
> 
> 3. vi /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml:
> Uncommented <load module ="mod_openzap"/> 
> 
> 4. vi /usr/local/freeswitch/conf/autoload_configs/openzap.conf.xml: Left
> default settings
> 
> 5. vi /usr/local/freeswitch/conf/openzap.conf:
> [span zt]
> name => OpenZAP
> number => 1
> fxo-channel => 1
> 
> 6. The wiki says to then run fs_cli, followed by "oz list", but: "oz list:
> Command not found!"
> 
> Did I miss something?
> 
> Thank you for any hint.