[Freeswitch-users] CDRs for Gateways

[Code Ghar]

Hi David

I looked at what you suggested. Before your suggestion, in
/usr/local/freeswitch/conf/autoload_configs/cdr_csv.conf file, I had the
following lines


<!-- Only log in Master.csv -->
<!--<param name="master-file-only" value="true"/>-->

After your suggestion, I changed it to

<!-- Only log in Master.csv -->
<!--<param name="master-file-only" value="true"/>-->

and then did a reloadxml. Now all CDRs were created in
/usr/local/freeswitch/log/cdr-csv/Master.csv and CDRs for inbound calls from
unregistered sources (i.e. external gateways) were also created in this
file. Thanks for your help.



Code,

I think you have a major issue or configuration error with your FS
setup.
FS, as any B2BUA, generates a CDR for any inbound leg, either from a
registered user or from a non-registered gateway.
It doesn't care where it comes from, it just does it.
I can barely imagine a softswitch that would not write the CDR
matching a call that was routed through it.

The CDR for the outbound leg is optional.

Can you confirm you are looking in Master.csv ?

David Ponzone  Direction Technique
email: david.ponzone at ipeva.fr
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26
www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis
à l'intention exclusive de ses destinataires. Toute utilisation ou
diffusion non autorisée est interdite. Tout message électronique est
susceptible d'altération. IPeva décline toute responsabilité au titre
de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes
pas destinataire de ce message, merci de le détruire immédiatement et
d'avertir l'expéditeur.




Le 21/05/2010 à 05:25, Code Ghar a écrit :

> Using mod_cdr_csv, it is easy to create CDRs for registered users.
> However, how can we get CDRs for external gateways? For example,
> FreeSWITCH is configured to receive calls from one gateway and send
> them out through another. In this scenario, when neither inbound nor
> outbound gateway registers itself to FreeSWITCH, how can we generate
> and store CDRs for inbound gateway?
>
> Similarly, let's say a SIP provider sends a call meant for a
> registered user. For example, if a cell phone calls 6175550000, it
> is routed through the telephone network to the SIP provider. This
> provider routes the call to FreeSWITCH, which looks up in its dial
> plan that this number should be routed to extension (or registered
> user) 1000. There are no CDRs generated for either the SIP
> provider's gateway or the registered user in this case.
>
> In both these scenarios, if a call is inbound to FreeSWITCH but has
> not been generated by a registered user, mod_cdr_csv does not create
> CDRs. I have even tried to set the following parameter in
> cdr_csv.conf.xml      but it didn't help.
>
> <param name="legs" value="ab"/>
>
> My question is this: can mod_cdr_csv generate CDRs for inbound calls
> from sources other than registered users? If it can't, how can this
> be achieved?
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100521/98197810/attachment-0001.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100521/069ccab9/attachment.html