[Freeswitch-users] mod_openzap, sangoma, FAX and HW-HEC
Moises Silva
moises.silva at gmail.com
Wed May 12 12:40:19 PDT 2010
It is implemented and should work as a work-around.
Having said that, I suggest you to contact Sangoma support (
techdesk at sangoma.com), the ec chip should detect fax tone and disable its
echo-canceling functions. However, some old versions of the driver have a
noise-reduction feature enabled by default which also happen to disrupt
faxes.
Try adding this just below TDMV_HWEC=YES option:
HWEC_NOISE_REDUCTION_DISABLE=YES
Or upgrade to the latest driver which does this automatically.
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
On Wed, May 12, 2010 at 1:24 PM, Anthony Minessale <
anthony.minessale at gmail.com> wrote:
> openzap has an app you can run to disable EC but i don't know if it's
> implemented into the sangoma plugin but its not hard to fix if it's not.
>
>
> On Wed, May 12, 2010 at 11:47 AM, Helmut Kuper <helmut.kuper at ewetel.de>wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hello,
>>
>>
>> I'm not sure whether I'm right here or not. But maybe someone has faced
>> same problem:
>>
>>
>> Scenario A:
>> I'm using Sangoma A104d and FreeSWITCH Version 1.0.head (17097:17188M).
>> I enabled hardware based detection of fax and dtmf. Further hardware
>> based HEC is enabled
>>
>> I'm not able to reveive a FAX (analog) via PSTN, while sending works and
>> internal (SIP) works as well. So there is no problem with the ATAs I use
>> nor with the network (which routes the RTP along 80 kilometers one way).
>>
>> Scenario B:
>> I'm able to receive FAX from pstn with same setup, but have hardware
>> based HEC disabled. So in this case everything works fine.
>>
>>
>> I thought sangoma's hardware based Fax detection feature should have
>> disabled HEC when a Fax is detected, but it doesn't seems so. So my
>> current thoughts are about the question whether FS is able to disable
>> hardware HEC via mod_openzap and wanpipe driver for the corresponding
>> A104d channel, when FS knows that the target is a FAX device ...
>>
>>
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.7 (MingW32)
>>
>> iD8DBQFL6tu84tZeNddg3dwRAur3AJ4rOw5ocXm+aGG7spLYtA4yx23eHACfcUPF
>> K+VHsbNiCR0XQeztzeI4iTY=
>> =ihsg
>> -----END PGP SIGNATURE-----
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
>
> --
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
> Twitter: http://twitter.com/FreeSWITCH_wire
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
> IRC: irc.freenode.net #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
> googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
> pstn:+19193869900
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100512/c10311d4/attachment.html
More information about the FreeSWITCH-users
mailing list