[Freeswitch-users] ESL and application "break" (to stop file playback) - timing issues.

[Peter Olsson]

I agree, that is a possibility. However, when sending a "SendMsg" with application "break", and receive "+OK" as it's reply, you kind of expect that it was received correctly, and will be handled in the event queue properly.

I have a created a small patch that (probably) will fix this in FS, without breaking anything else. I just need to test it first - if everything seems ok I will add a jira for it, with the patch attached.

/Peter

Från: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] För Anthony Minessale
Skickat: den 15 mars 2010 17:21
Till: freeswitch-users at lists.freeswitch.org
Ämne: Re: [Freeswitch-users] ESL and application "break" (to stop file playback) - timing issues.

you could also wait for the execute_complete of the file you were playing
On Mon, Mar 15, 2010 at 9:40 AM, Peter Olsson <peter.olsson at visionutveckling.se<mailto:peter.olsson at visionutveckling.se>> wrote:
Thanks for the reply.

Yes, I thought of this.

But that still shouldn't solve the issue? It will only tell that the CF_BREAK flag was set on the channel, not that the current playback detected the flag in the loop (which I guess is done in a different thread), or is this event sent once the playback really did stop?

/Peter

Från: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [mailto:freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>] För Anthony Minessale
Skickat: den 15 mars 2010 16:31
Till: freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>
Ämne: Re: [Freeswitch-users] ESL and application "break" (to stop file playback) - timing issues.

you could wait for the execute_complete event for your break command.
On Mon, Mar 15, 2010 at 3:20 AM, Peter Olsson <peter.olsson at visionutveckling.se<mailto:peter.olsson at visionutveckling.se>> wrote:
I'm not sure if this belongs in Jira, or if it's possible to do it another way - so I try the list first :)

I'm using ESL to do some IVR functions. Basically I play some sound files, wait for DTMF, and then do something, like record a message, transfer the call to a mobile phone etc. Quite basic and simple.

I've noticed one problem with this, and it's when I want to stop playback using command "break". In 99% of the time everything works as expected, but sometimes I get this problem - and the problem is that the current file doesn't stop playing. And I think I know why this is happening.

Lets say I first send playback(tone_stream://%(1500, 3500, 440.0, 0.0);loops=100) to the channel. This will play a ring-tone (swedish) and loop through it 100 times.. When I want to stop this tone I send the break command, and directly after this a new playback command. Maybe 1 time in 100 tries the tone_stream doesn't stop playing. I think this is becuase how break works. From what I understand from the source it just sets the CF_BREAK flag on the channel, and then the playback application will detect this and stop the playback. However, when I send a new playback command immediately after break it will reset the CF_BREAK-flag again, to make sure it won't cause any problems for the new playback. So if the original playback (tone_stream) didn't check the flag before it was reset, it won't known that it was supposed to stop playing.

I guess I could wait 50ms before sending the new playback message, but I can really never be sure that it was handled properly.

Is there any other way around this? How about "break <uuid> all", will it make any difference in this case? Or should this just be treated as a timing bug, and filed to Jira? Any help on this would be greatly appreciated.

These are the messages I'm sending;

SendMsg <uuid>
call-command: execute
execute-app-name: playback
execute-app-arg: tone_stream://%(1500, 3500, 440.0, 0.0);loops=100

When I don't want this to play anymore I send a break;

SendMsg <uuid>
call-command: execute
execute-app-name: break

And immediately after this I want to play another file;

SendMsg <uuid>
call-command: execute
execute-app-name: playback
execute-app-arg: file/to/play.wav


Regards,

Peter Olsson


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale at hotmail.com<mailto:MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<mailto:PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org<mailto:sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888<http://iax:guest@conference.freeswitch.org/888>
googletalk:conf+888 at conference.freeswitch.org<mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:+19193869900

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale at hotmail.com<mailto:MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<mailto:PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org<mailto:sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888<http://iax:guest@conference.freeswitch.org/888>
googletalk:conf+888 at conference.freeswitch.org<mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:+19193869900
!DSPAM:4b9e60d032938314917241!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100316/72dee8aa/attachment-0002.html