[Freeswitch-users] doublenat outgoing call issue
Brian West
brian at freeswitch.org
Mon Mar 8 06:28:05 PST 2010
Step 1. Revert everything back to SVN trunk.
Step 2. Enable UPNP/NATPMP on both routers.
Step 3. It should just work. The doublenat profile is NO LONGER NEEDED.
If you can't enable UPNP/NATPMP then by all means static map the ports correctly or put the FreeSWITCH box in the DMZ on both ends. It should just work.
/b
On Mar 8, 2010, at 6:56 AM, Bruce Hopkins wrote:
> Hi,
>
> I wonder if some kind soul might be able please to help me by pointing out what I am doing wrong with my doublenat configuration.
>
> I have incoming calls from WAN --> LAN working fine, but when I try to call from LAN -->WAN, the Freeswitch CLI says:
>
>
> "[ERR} switch_ivr_originate.c.2389 CAnnot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED]"
>
>
> The setup is essentially:
>
>
> phone_1 (192.168.a.b) --> NAT (public ip 1.2.3.4) --> Internet --> NAT (public ip 5.6.7.8) --> Freeswitch (192.168.x.y) --> phone_2 (192.168.x.z)
>
>
> Phone_1 is able to register with Freeswitch using a "doublenat" sip profile I set up using port 5090, created from the default external profile with the port changed. phone_1 can initiate calls to phone_2 fine with no problems with audio - everything works just fine in that direction.
>
> However when I try to call from phone_2 --> phone_1 I get the message "The person at extension 1002 is not available. Record your message at the tone." Meanwhile the CLI shows that Freeswitch says phone_1 is not registered.
>
> In trying to solve this I have run a Wireshark trace onthe PC running the phone_1 softphone to check that the SIP registration seems to go as I understand it should. the dialog is as follows:
>
> phone_1 --> FS request: REGISTER
> FS --> phone_1 status: 401 Unauthorised
> phone_1 --> FS request: REGISTER
> FS --> phone_1 status: 200 OK
> phone_1 --> FS request: SUBSCRIBE
> FS --> phone_1 status: 405 Method Not Allowed
>
>
> There does appear to be a difference here to what happens when phone_2 (on the same LAN as Freeswitch) registers. With phone_2 I see:
>
> phone_2 --> FS request: REGISTER
> FS --> phone_2 status: 401 Unauthorised
> phone_2 --> FS request: REGISTER
> FS --> phone_2 status 200 OK
> phone_2 --> FS request: SUBSCRIBE
> FS --> phone_2 status: 202 Accepted
> FS --> phone_2 request: NOTIFY
> phone_2 --> FS status: 200 OK
>
>
>
> More configuration details:
>
> In conf/sip_profiles/doublenat.xml I have not uncommented <param name="force-register-domain" value="$$(domain)"/>
>
> In conf/sip_profiles/doublenat.xml I have tried setting the context to each of public and default. This does not seem to make a difference.
>
> In conf/directory/doublenat.xml I have set the domain name to be the domain name registerd for Fs's external IP with DNS, and used by phone_1.
>
> In conf/directory/doublenat.xml I have tried both of the following 9I don't know if this is relevant)
>
> 1. Firstly with phone_1 registering to an extension in the default configuration, held in conf/directory/default/:
>
> <groups>
> <group name="default">
> <users>
> <X-PRE-PROCESS cmd="include" data="default/*.xml"/>
> </users>
> </group>
>
> 2. Then I tried moving the .xml file for phone_1's extension to conf/drectory/doublenat/ and changed conf/directory/doublenat.xml to show:
>
> <groups>
> <group name="doublenat">
> <users>
> <X-PRE-PROCESS cmd="include" data="doublenat/*.xml"/>
> </users>
> </group>
>
> Unfortunately this does not make a difference to the issue though.
>
> If anybody had the time to tell me what I am doing wrong I would be hugely grateful !
>
> Many thanks in advance
> Bruce
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
More information about the FreeSWITCH-users
mailing list