[Freeswitch-users] doublenat outgoing call issue

Wed Mar 10 15:05:00 PST 2010

OK - I have put a Wireshark trace across the router between FS and the
internet, and it will not surprise you to hear that when I tried ot call
from LAN-->WAN, FS was sending packets to the private IP of the remote phone
(behind its own NAT).

So how to sort this?

I tried:

1. Commenting these out in the internal profile

<!--all inbound reg will look in this domain for the users -->
    <!--<param name="force-register-domain" value="$${domain}"/>-->
    <!--force the domain in subscriptions to this value -->
    <!--<param name="force-subscription-domain" value="$${domain}"/>-->
    <!--all inbound reg will stored in the db using this domain -->
    <!--<param name="force-register-db-domain" value="$${domain}"/>-->

2. then creating a n antry in the directory refering to the same default
group of extensions as the default.xml, but with:
<domain name="dns.aname.for.FS">

and in the variables:

 <variable name="sip-force-contact" value="NDLB-connectile-dysfunction"/>

which I hoped from what I read in the Wiki might do the trick vis a vis
forceing FS to send the SIP packets to the public IP of the remote phone.

Alas it does not seem to work, and even phoning in from the WAS -->LAN now I
see USER_NOT_REGISTERED errors .  I get the same error in both directions.

Please please please could somebody put me out of my (your ;-) ) misery here
....?

What do I configure to tell FS to send outbound INVITE's to the public IP
the remote phone registered from behind, rather than its private NAT'ed ip?

many thanks in advance.
Bruce

On 10 March 2010 22:04, Bruce Hopkins <jbrucehopkins at gmail.com> wrote:

> Interestingly I *can* call outbound to the WAN a SIP client registered
> with FS via Fring.  I wonder if Fring have some additional nat traversal/SBC
> malarkey going on as they proxy the calls.
>
> I can't call outbound to an Eyebeam softphone registered directly wth FS
> though - although said Eyebeam is registered and can call inwards.
>
> I must have my nat handling configured wrongly.
>
> B
>
>
> On 10 March 2010 21:28, Bruce Hopkins <jbrucehopkins at gmail.com> wrote:
>
>> Hey Roly,
>>
>> Are you getting anywhere?  I'm still struggling, I'm afraid.
>>
>> I'm able to call from WAN --> LAN using the internal profile on port 5060,
>> but I still can't call out from LAN --> WAN so there is obviously something
>> really basic I'm still not getting.
>>
>> In sip_profiles/internal.xml I have:
>>
>>
>>  <param name="aggressive-nat-detection" value="true"/>
>> <param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
>> <param name="ext-sip-ip" value="$${external_sip_ip}"/>
>>
>> <!-- the external_rtp_ip etc being defined in vars.xml -->
>>
>>
>> In this example I have left <param name="force-register-domain"
>> value="$${domain}"/> etc uncommented to force the registration to go to
>> default.xml in the dialplan.
>>
>> I thought maybe this was my problem and tried putting a separate file in
>> the directory to enable the WAN phone to register using the external DNS
>> name for the server as its domain, and uncommenting force-register-domain,
>> etc.  But then I got an error saying that the local (to Freeswitch) phone in
>> the LAN was not registered when I tried to make the call from the WAN.
>>
>> Any thoughts?
>>
>> cheers
>> Bruce
>>
>>
>>
>>
>>
>>
>>
>> On 10 March 2010 12:00, Bruce Hopkins <jbrucehopkins at gmail.com> wrote:
>>
>>> Hi Roly,
>>>
>>> I hope to be able to have a go at this later today.  I'll let you know
>>> what happens.
>>>
>>> I have my FS box behind a hardware router/firewall, so I'm assuming I
>>> just forward SIP port 5060 from the WAN to the FS box and use internal
>>> profile, instead of using external profile with port 5080 forwarded as I
>>> have at the moment.  We'll see what happens.
>>>
>>> cheers
>>> Bruce
>>>
>>> On 9 March 2010 19:08, Roly Maz <rm at callrica.co.za> wrote:
>>>
>>>> Ah I see... what? Please share and lead this blind man out the FS
>>>> wilderness!
>>>>
>>>> I don't understand...what happens to the external profile? Do you delete
>>>> it?
>>>> And how do you forward port 5060?
>>>>
>>>> ...and you thought you were a newbie!
>>>>
>>>> Any insight would be much appreciated...loving the journey.
>>>>
>>>> -----Original Message-----
>>>> From: freeswitch-users-bounces at lists.freeswitch.org
>>>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of
>>>> Bruce
>>>> Hopkins
>>>> Sent: 09 March 2010 08:23 AM
>>>> To: freeswitch-users at lists.freeswitch.org
>>>> Subject: Re: [Freeswitch-users] doublenat outgoing call issue
>>>>
>>>> Ah I see.  I will try again using the internal profile and forwarding
>>>> port 5060.  Presumably still creating a directory entry to enable the
>>>> outside-facing domain to be used.
>>>>
>>>> Many thanks for your patient help of a newbie Brian.
>>>>
>>>> Cheers
>>>> Bruce
>>>>
>>>> Please excuse the brevity - sent from my mobile.
>>>>
>>>> On 8 Mar 2010, at 17:21, Brian West <brian at freeswitch.org> wrote:
>>>>
>>>> > ok you aren't catching one key thing here.. you no longer need two
>>>> > profiles.
>>>> >
>>>> > /b
>>>> >
>>>> > On Mar 8, 2010, at 11:12 AM, Bruce Hopkins wrote:
>>>> >
>>>> >> Hi again,
>>>> >>
>>>> >> Thanks for the help so far.  Unfotrunately I must still be doing
>>>> >> something wrong here as I am still having difficulty, and still
>>>> >> have the same problem.
>>>> >>
>>>> >> I updated to build 16938 by means of "make current"
>>>> >>
>>>> >> I'm not able to use UPNP or NATPMP so changed the port forwarding
>>>> >> to use 5080 instead of 5090.
>>>> >>
>>>> >> I got rid of the doublenat profile in sip_profiles, though I had to
>>>> >> retain an entry in the directory /usr/local/freeeswitch/conf/
>>>> >> directory/ext_dns.xml in order to give freeswitch the dns name of
>>>> >> the server as a domain for the remote softphone to register on.  I
>>>> >> left the group name in this entry the same as inthe default entry,
>>>> >> so that the remote phone could register on the same extension
>>>> >> numbers (100, etc) as in the default build.
>>>> >>
>>>> >> I still find that, if I initiate a call from the local (on same LAN
>>>> >> as freeswitch) phone to the remote phone, I get the message on the
>>>> >> CLI:
>>>> >>
>>>> >> [ERR] switch_ivr_originate.c2389 Cannot create outgoing channel of
>>>> >> type [user] cause: [USER_NOT_REGISTERED]
>>>> >>
>>>> >> One possibly unrelated aside, I also found I needed to uncomment
>>>> >> <param name="aggressive-nat-detection" value="true"/> in
>>>> >> external.xml, otherwise in the case of a call initiated by the
>>>> >> remote phone being hung up by the local phone, freeswitch sent the
>>>> >> BYE to the private IP of the remote phone, rather than its public
>>>> >> ip - meaning that the remote phone didn't receive the BYE.
>>>> >>
>>>> >> Any further ideas where I am going wrong here please?
>>>> >>
>>>> >> thanks again in advance
>>>> >> Bruce
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > FreeSWITCH-users mailing list
>>>> > FreeSWITCH-users at lists.freeswitch.org
>>>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-
>>>> > users
>>>> > http://www.freeswitch.org
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100310/b754121a/attachment-0001.html 