[Freeswitch-users] Not able to do outbound call
ovvenkat
ovvenkatesan at gmail.com
Wed Jul 21 09:35:01 PDT 2010
Hi Nazim,
Do I need to add this into my deafult.xml file or public.xml file?
I have added bellow code into default.xml file
<extension name="Voicepulse">
<condition field="destination_number" expression="xxxxyyyxx"> //
xxxyyyxx -- > my PRI number
<action application="transfer" data="1000 XML default"/>
</condition>
</extension>
After adding this rules, when I am trying to call from mobile to freeSwitch,
its says that, number is busy.
then, I changed this code from *default.xml* to *public.xml* file.
Still, no luck :(
Regards,
Venkat.
On Wed, Jul 21, 2010 at 8:49 PM, Nazim Aghabayov
<nazim.aghabayov at gmail.com>wrote:
> Hello Venkat,
>
> I'm glad it works for you. For incoming you could do something like:
>
> <extension name="telco-incoming">
> <condition field="destination_number" expression="^(4970000)$">
>
> <action application="transfer" data="1003 XML default"/>
> </condition>
> </extension>
>
> Regards,
> Nazim
>
>
> On 07/20/2010 06:07 PM, ovvenkat wrote:
> > Hi Nazim,
> >
> > Could you plz tell me, how to handle the incoming call if you could
> > plz give me some sample dialplan to handle the incoming call would be
> > great.
> >
> > Regards,
> > Venkat.
> >
> >
> >
> > On Tue, Jul 20, 2010 at 6:32 PM, ovvenkat <ovvenkatesan at gmail.com
> > <mailto:ovvenkatesan at gmail.com>> wrote:
> >
> >
> >
> >
> > Thank you very much Nazim , It works :) .
> >
> >
> > Regards,
> > Venkat.
> >
> >
> >
> > On Tue, Jul 20, 2010 at 4:02 PM, Nazim Aghabayov
> > <nazim.aghabayov at gmail.com <mailto:nazim.aghabayov at gmail.com>>
> wrote:
> >
> > Hello Venkat,
> >
> > Below is my working configuration for q931 euro-isdn.
> > Please have a look at:
> > http://wiki.sangoma.com/wanpipe-freeswitch-config
> > && http://wiki.sangoma.com/wanpipe-pri-daemon-options
> >
> >
> > openzap.conf
> > ---------------------------------
> > [span wanpipe PRI_1]
> > name => PRI_1
> > number => 1
> > trunk_type => e1
> > b-channel => 1:1-15
> > b-channel => 1:17-31
> >
> >
> > openzap.conf.xml
> > -----------------------------------
> > <configuration name="openzap.conf" description="OpenZAP
> > Configuration">
> > <settings>
> > <param name="debug" value="0"/>
> > </settings>
> > <boost_spans>
> > <span name="PRI_1">
> > <!-- Log Levels: none, alert, crit, err, warning, notice,
> > info, debug -->
> > <param name="q921loglevel" value="alert"/>
> > <param name="q931loglevel" value="debug"/>
> > <param name="mode" value="user"/>
> > <param name="dialect" value="q931"/>
> > <param name="dialplan" value="XML"/>
> > <param name="context" value="default"/>
> >
> > <!-- my mystical telco, they insisting on TON = NPI = 0 -->
> > <param name="outbound-called-ton" value="unknown"/>
> > <param name="outbound-called-npi" value="unknown"/>
> > <param name="outbound-rdnis-ton" value="unknown"/>
> > <param name="outbound-rdnis-npi" value="unknown"/>
> > <param name="outbound-calling-ton" value="unknown"/>
> > <param name="outbound-calling-npi" value="unknown"/>
> > </span>
> > </boost_spans>
> > </configuration>
> >
> >
> > dialplan
> > ---------------
> > <extension name="priout">
> >
> > <condition field="destination_number"
> > expression="(?!4970000)\d{7}">
> >
> > <action application="set"
> > data="effective_caller_id_number=4970000"/>
> > <action application="set"
> > data="effective_caller_id_name=4970000"/>
> >
> > <action application="bridge"
> > data="openzap/PRI_1/a/${destination_number}@g1"/>
> >
> > </condition>
> > </extension>
> >
> > Best Regards,
> > Nazim
> >
> >
> > On 07/19/2010 01:36 PM, ovvenkat wrote:
> > > Hi to all,
> > >
> > > I am very new to this world. I am not able to do outbound
> > call using
> > > Sangoma A101 card and freeSwitch.
> > >
> > > Here is the procedure I have followed
> > >
> > > *openzap.conf*
> > >
> > > [span wanpipe smg_prid]
> > > name => smg_prid
> > > trunk_type =>e1
> > > b-channel => 1:1-15
> > > d-chennel => 1:16
> > > b-channel => 1:17-31
> > >
> > > I have one span in *openzap.conf.xml*
> > >
> > > <configuration name="openzap.conf" description="OpenZAP
> > Configuration">
> > > <settings>
> > > <param name="debug" value="0"/>
> > > </settings>
> > > <boot_spans>
> > > <span id="smg_prid"/>
> > > <param name="node" value="cpe"/>
> > > <param name="switch" value="ni1">
> > > <param name="dialplan" value="XML">
> > > <param name="context" value="default">
> > > </span>
> > > <boot_spans>
> > > <analog_spans>
> > > </analog_spans>
> > > </configuration >
> > > </analog_spans>
> > >
> > > *My Dial plan is
> > >
> > > *added one extension in default.xml file
> > >
> > > <extension name="outgoing-pri">
> > > <condition field="destination_number" expression="12345">
> > > <action application="bridge" data="OpenZAP/smg_prid/a/<my
> > number>@g1"/>
> > > </condition>
> > > </extension>
> > >
> > > When i trying to call "12345" I am getting following output
> > in *fs_cli* ,
> > >
> > > 2010-07-19 01:50:17.531933 [DEBUG] sofia.c:5992 IP
> 192.168.1.100
> > > Rejected by acl "domains". Falling back to Digest auth.
> > > 2010-07-19 01:50:17.562934 [DEBUG] sofia.c:5992 IP
> 192.168.1.100
> > > Rejected by acl "domains". Falling back to Digest auth.
> > > 2010-07-19 01:50:17.581933 [NOTICE] switch_channel.c:776 New
> > Channel
> > > sofia/internal/1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110> <mailto:1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110>>
> > > [36c842f2-8078-4ca0-a6e0-36f5d65f81f8]
> > > 2010-07-19 01:50:17.583936 [DEBUG]
> > switch_core_state_machine.c:314
> > > (sofia/internal/1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110> <mailto:1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110>>)
> > > Running State Change CS_NEW
> > > 2010-07-19 01:50:17.583936 [DEBUG]
> > switch_core_state_machine.c:320
> > > (sofia/internal/1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110> <mailto:1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110>>) State NEW
> > > 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4310 Channel
> > > sofia/internal/1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110> <mailto:1000 at 192.168.1.110
> > <mailto:1000 at 192.168.1.110>> entering
> > > state [received][100]
> > > 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4321 Remote SDP:
> > > v=0
> >
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > <mailto:FreeSWITCH-users at lists.freeswitch.org>
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> >
> > --
> >
> > If you have come to help me, you are wasting your time.
> > If you have come to because your liberation is bound up in mine,
> > we can work together.
> >
> >
> > Regards
> > Venkatesan OV.
> >
> >
> >
> >
> > --
> >
> > If you have come to help me, you are wasting your time.
> > If you have come to because your liberation is bound up in mine, we
> > can work together.
> >
> >
> > Regards
> > Venkatesan OV.
> >
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
--
If you have come to help me, you are wasting your time.
If you have come to because your liberation is bound up in mine, we can work
together.
Regards
Venkatesan OV.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100721/48bf09e8/attachment-0001.html
More information about the FreeSWITCH-users
mailing list