[Freeswitch-users] Not able to do outbound call

[Nazim Aghabayov]

  Hello Venkat,

Below is my working configuration for q931 euro-isdn.
Please have a look at: http://wiki.sangoma.com/wanpipe-freeswitch-config 
&& http://wiki.sangoma.com/wanpipe-pri-daemon-options


openzap.conf
---------------------------------
[span wanpipe PRI_1]
name => PRI_1
number => 1
trunk_type => e1
b-channel => 1:1-15
b-channel => 1:17-31


openzap.conf.xml
-----------------------------------
<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="0"/>
</settings>
<boost_spans>
<span name="PRI_1">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="q921loglevel" value="alert"/>
<param name="q931loglevel" value="debug"/>
<param name="mode" value="user"/>
<param name="dialect" value="q931"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>

<!-- my mystical telco, they insisting on TON = NPI = 0  -->
<param name="outbound-called-ton" value="unknown"/>
<param name="outbound-called-npi" value="unknown"/>
<param name="outbound-rdnis-ton" value="unknown"/>
<param name="outbound-rdnis-npi" value="unknown"/>
<param name="outbound-calling-ton" value="unknown"/>
<param name="outbound-calling-npi" value="unknown"/>
</span>
</boost_spans>
</configuration>


dialplan
---------------
<extension name="priout">

<condition field="destination_number" expression="(?!4970000)\d{7}">

<action application="set" data="effective_caller_id_number=4970000"/>
<action application="set" data="effective_caller_id_name=4970000"/>

<action application="bridge" 
data="openzap/PRI_1/a/${destination_number}@g1"/>

</condition>
</extension>

Best Regards,
Nazim


On 07/19/2010 01:36 PM, ovvenkat wrote:
> Hi to all,
>
> I am very new to this world.  I am not able to do outbound call using 
> Sangoma A101 card  and freeSwitch.
>
> Here is the procedure I have followed
>
> *openzap.conf*
>
> [span wanpipe smg_prid]
> name => smg_prid
> trunk_type =>e1
> b-channel => 1:1-15
> d-chennel => 1:16
> b-channel => 1:17-31
>
> I have one span in *openzap.conf.xml*
>
> <configuration name="openzap.conf" description="OpenZAP Configuration">
> <settings>
> <param name="debug" value="0"/>
> </settings>
> <boot_spans>
> <span id="smg_prid"/>
> <param name="node" value="cpe"/>
> <param name="switch" value="ni1">
> <param name="dialplan" value="XML">
> <param name="context" value="default">
> </span>
> <boot_spans>
> <analog_spans>
> </analog_spans>
> </configuration >
> </analog_spans>
>
> *My Dial plan is
>
> *added one extension in default.xml file
>
> <extension name="outgoing-pri">
> <condition field="destination_number" expression="12345">
> <action application="bridge" data="OpenZAP/smg_prid/a/<my number>@g1"/>
> </condition>
> </extension>
>
> When i trying to call "12345" I am getting following output in *fs_cli* ,
>
> 2010-07-19 01:50:17.531933 [DEBUG] sofia.c:5992 IP 192.168.1.100 
> Rejected by acl "domains". Falling back to Digest auth.
> 2010-07-19 01:50:17.562934 [DEBUG] sofia.c:5992 IP 192.168.1.100 
> Rejected by acl "domains". Falling back to Digest auth.
> 2010-07-19 01:50:17.581933 [NOTICE] switch_channel.c:776 New Channel 
> sofia/internal/1000 at 192.168.1.110 <mailto:1000 at 192.168.1.110> 
> [36c842f2-8078-4ca0-a6e0-36f5d65f81f8]
> 2010-07-19 01:50:17.583936 [DEBUG] switch_core_state_machine.c:314 
> (sofia/internal/1000 at 192.168.1.110 <mailto:1000 at 192.168.1.110>) 
> Running State Change CS_NEW
> 2010-07-19 01:50:17.583936 [DEBUG] switch_core_state_machine.c:320 
> (sofia/internal/1000 at 192.168.1.110 <mailto:1000 at 192.168.1.110>) State NEW
> 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4310 Channel 
> sofia/internal/1000 at 192.168.1.110 <mailto:1000 at 192.168.1.110> entering 
> state [received][100]
> 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4321 Remote SDP:
> v=0