[Freeswitch-users] mod_lcr problem
Rupa Schomaker
rupa at rupa.com
Sun Jan 31 05:32:04 PST 2010
On Sat, Jan 30, 2010 at 10:57 PM, Mouncif Benniane <mouncifbb at gmail.com>wrote:
> OK going back to use default profile to keep things simple below 2 results
>
> Using:
>
> lcr 16179470890 default 19785223241 ( this one consult
> npa_nxx_company_ocn)
>
> lcr 6179470890 default 9785223241 ( this one don't!! )
>
>
>
Oh, right! mod_lcr really expects you to normalize your prefix to e164
format. I thought there was discussion about this in the wiki, but maybe
not. For simple prefix matching it doesn't matter, but for things that make
decisions based on the # (like the lata/state stuff) it does.
npanxx lookup only makes sense for NANPA numbers. NANPA numbers have a
country code of "1" and a total length of 11 (including the 1).
This is the only rational way to do it when you have a rate table with both
domestic (NANPA) and international prefixes.
> freeswitch> lcr 16179470890 default 19785223241
> 2010-01-30 23:53:34.681842 [DEBUG] mod_lcr.c:1329 data passed to lcr is
> [16179470890 default 19785223241]
> 2010-01-30 23:53:34.681842 [DEBUG] mod_lcr.c:1365 Set Caller ID to
> [19785223241]
> 2010-01-30 23:53:34.681842 [DEBUG] mod_lcr.c:736 SQL: SELECT 'state',
> count(DISTINCT state) FROM npa_nxx_company_ocn WHERE (npa=617 AND nxx=947)
> OR (npa=978 AND nxx=522) UNION SELECT 'lata', count(DISTINCT lata) FROM
> npa_nxx_company_ocn WHERE (npa=617 AND nxx=947) OR (npa=978 AND nxx=522)
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:696 Type: state, Count: 1
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:696 Type: lata, Count: 1
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:786 intra routing [state:1
> lata:1] so rate field is [intralata_rate]
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:802 we have an event
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:826 SQL: SELECT l.digits,
> c.carrier_name, l.intralata_rate, cg.prefix AS gw_prefix, cg.suffix AS
> gw_suffix, l.lead_strip, l.trail_strip, l.prefix, l.suffix , cg.codec ,
> l.cid FROM lcr l JOIN carriers c ON l.carrier_id=c.id JOIN carrier_gateway
> cg ON c.id=cg.carrier_id WHERE c.enabled = '1' AND cg.enabled = '1' AND
> l.enabled = '1' AND digits IN (16179470890, 1617947089, 161794708, 16179470,
> 1617947, 161794, 16179, 1617, 161, 16, 1) AND CURRENT_TIMESTAMP BETWEEN
> date_start AND date_end ORDER BY digits DESC, intralata_rate, rand();
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier1,lcr_rate=0.00000]sofia/gateway/carrier1/16179470890
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:615 Adding carrier1 to head of
> list
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier2,lcr_rate=0.00000]sofia/external/
> 06179470890 at proxy.carrier2.net:5060
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:667 adding carrier2 to end of
> list after carrier1
>
>
> | Digit Match | Carrier | Rate | Codec | CID Regexp |
> Dialstring
> |
> | 1 | carrier1 | 0.00000 | | |
> [lcr_carrier=carrier1,lcr_rate=0.00000]sofia/gateway/carrier1/16179470890
> |
> | 1 | carrier2 | 0.00000 | | |
> [lcr_carrier=carrier2,lcr_rate=0.00000]sofia/external/
> 06179470890 at proxy.carrier2.net:5060 |
>
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier1,lcr_rate=0.00000]sofia/gateway/carrier1/16179470890
> 2010-01-30 23:53:34.910842 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier2,lcr_rate=0.00000]sofia/external/
> 06179470890 at proxy.carrier2.net:5060
>
>
>
>
>
> freeswitch> lcr 6179470890 default 9785223241
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:1329 data passed to lcr is
> [6179470890 default 9785223241]
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:1365 Set Caller ID to
> [9785223241]
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:786 intra routing [state:0
> lata:0] so rate field is [rate]
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:802 we have an event
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:826 SQL: SELECT l.digits,
> c.carrier_name, l.rate, cg.prefix AS gw_prefix, cg.suffix AS gw_suffix,
> l.lead_strip, l.trail_strip, l.prefix, l.suffix , cg.codec , l.cid FROM lcr
> l JOIN carriers c ON l.carrier_id=c.id JOIN carrier_gateway cg ON c.id=cg.carrier_id
> WHERE c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1' AND digits IN
> (6179470890, 617947089, 61794708, 6179470, 617947, 61794, 6179, 617, 61, 6)
> AND CURRENT_TIMESTAMP BETWEEN date_start AND date_end ORDER BY digits DESC,
> rate, rand();
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier1,lcr_rate=0.09000]sofia/gateway/carrier1/16179470890
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:615 Adding carrier1 to head of
> list
> 2010-01-30 23:52:58.782633 [DEBUG] mod_lcr.c:307 Returning Dialstring
> [lcr_carrier=carrier1,lcr_rate=0.09000]sofia/gateway/carrier1/16179470890
>
>
> | Digit Match | Carrier | Rate | Codec | CID Regexp |
> Dialstring |
> | 617947 | carrier1 | 0.09000 | | |
> [lcr_carrier=carrier1,lcr_rate=0.09000]sofia/gateway/carrier1/16179470890 |
>
>
>
>
>
>
>
>
>
>
>
> On Sat, Jan 30, 2010 at 7:45 PM, Rupa Schomaker <rupa at rupa.com> wrote:
>
>> turn up logging to debug again, and then reload mod_lcr. It'll spit out a
>> bunch of crap when it tests out each profile you have defined. Give me the
>> full log (here or in pastebin.freeswitch.org). That may show more useful
>> info as to why things are mucked up?
>>
>>
>> On Sat, Jan 30, 2010 at 6:23 PM, Mouncif Benniane <mouncifbb at gmail.com>wrote:
>>
>>> yes I use NANPA_STD profile instead of default cause I thought the custom
>>> profile was causing issues, but looks like it's returning same results.
>>>
>>> There is this line in thw wiki:
>>> intra lata/state selection is done manually by setting the channel
>>> variables *intrastate* or *intralata* to the value *true*.
>>>
>>> do I have to set these ? if yes how?
>>>
>>> Thanks
>>>
>>>
>>> On Sat, Jan 30, 2010 at 6:59 PM, Rupa Schomaker <rupa at rupa.com> wrote:
>>>
>>>> Stuff inline.
>>>>
>>>> On Sat, Jan 30, 2010 at 3:38 PM, Mouncif Benniane <mouncifbb at gmail.com>wrote:
>>>>
>>>>> NPANXX,"LATA","OCN","NTER","INTRA"
>>>>> 201007,"224","7229","0.0059","0.0127"
>>>>> 201040,"224","9206","0.0036","0.0036"
>>>>>
>>>>
>>>> Looks like they give you the LATA and OCN values with the prefix. We
>>>> (should) look that up ourselves.
>>>>
>>>>
>>>>> FreeSWITCH Version 1.0.trunk (16540)
>>>>>
>>>>>
>>>>> Also I noticed the *npa_nxx_ocn* table never get consulted.
>>>>>
>>>>> I also see this now when making a real call instead of running thorugh
>>>>> CLI
>>>>>
>>>>> EXECUTE sofia/external/6179472456 at 174.x.x.x lcr(16179470890 NANPA_STD)
>>>>> 2010-01-30 16:28:56.685457 [DEBUG] mod_lcr.c:1230 *intrastate channel
>>>>> var is [undef]*
>>>>
>>>>
>>>> This is fine. it is a leftover from when you would tell mod_lcr via a
>>>> channel var that it should do intrastate. I later had mod_lcr do the lookup
>>>> itself, but we still honor the old var. There are no channel vars
>>>> associated with the cli, so you wouldn't see that msg.
>>>>
>>>>
>>>>>
>>>>> 2010-01-30 16:28:56.685457 [DEBUG] mod_lcr.c:1233 Select routes based
>>>>> on interstate rates
>>>>> 2010-01-30 16:28:56.685457 [DEBUG] mod_lcr.c:1252 LCR Lookup on
>>>>> 16179470893 using profile NANPA_STD
>>>>> 2010-01-30 16:28:56.685457 [DEBUG] mod_lcr.c:786 intra routing [state:0
>>>>> lata:0] so rate field is [rate]
>>>>>
>>>>> called number 6179470890 caller ID: 6179472456
>>>>>
>>>>> any ideas??
>>>>>
>>>>>
>>>> Only thing that jumps out at me.
>>>>
>>>> The output from lcr_admin show profiles showed only the default one. On
>>>> the dialplan you use the NANPA_STD profile. Can you check lcr_admin list
>>>> and see if that profile is defined and if so if it says it is using the
>>>> npanxx table?
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Jan 30, 2010 at 10:02 AM, Rupa Schomaker <rupa at rupa.com>wrote:
>>>>>
>>>>>> Something is still missing from the logs. Note the query of the npanxx
>>>>>> table, the flags being set, and the rate field being chosen. Umm..
>>>>>> oh, what version of fs are you running?
>>>>>>
>>>>>> Yes, the npa_nxx_ocn table needs to be loaded up as described in:
>>>>>>
>>>>>> http://wiki.freeswitch.org/wiki/Mod_cidlookup#Falling_back_to_.22City_State.22_in_the_absense_of_a_name
>>>>>> (there is a link to that from mod_lcr's wiki page).
>>>>>>
>>>>>> An example from my own setup:
>>>>>>
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:1384 data passed to lcr
>>>>>> is [12148267711 default 12148267712]
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:1420 Set Caller ID to
>>>>>> [12148267712]
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:759 SQL: SELECT 'state',
>>>>>> count(DISTINCT state) FROM npa_nxx_company_ocn WHERE (npa=214 AND
>>>>>> nxx=826) OR (npa=214 AND nxx=826) UNION SELECT 'lata', count(DISTINCT
>>>>>> lata) FROM npa_nxx_company_ocn WHERE (npa=214 AND nxx=826) OR (npa=214
>>>>>> AND nxx=826)
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:719 Type: lata, Count: 1
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:719 Type: state, Count: 1
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:809 intra routing
>>>>>> [state:1 lata:1] so rate field is [intralata_rate]
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:825 we have an event
>>>>>> 2010-01-30 08:55:10.633951 [DEBUG] mod_lcr.c:849 SQL: SELECT l.digits
>>>>>> AS lcr_digits, c.carrier_name AS lcr_carrier_name,
>>>>>> l.intralata_rate as lcr_rate_field, cg.prefix AS lcr_gw_prefix,
>>>>>> cg.suffix AS lcr_gw_suffix, l.lead_strip AS lcr_lead_strip,
>>>>>> l.trail_strip AS lcr_trail_strip, l.prefix AS lcr_prefix,
>>>>>> l.suffix AS lcr_suffix, cg.codec AS lcr_codec, l.cid AS
>>>>>> lcr_cid, 'carriers' AS lcr_limit_realm, c.carrier_name AS
>>>>>> lcr_limit_id, 5 AS lcr_limit_max FROM lcr l JOIN carriers c ON
>>>>>> l.carrier_id=c.id JOIN carrier_gateway cg ON c.id=cg.carrier_id
>>>>>> WHERE c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1'
>>>>>> AND digits_prefix @> '12148267711' AND CURRENT_TIMESTAMP BETWEEN
>>>>>> date_start AND date_end ORDER BY digits DESC, intralata_rate,
>>>>>> random();
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:314 Returning Dialstring
>>>>>>
>>>>>> [lcr_carrier=grnvoip_us,lcr_rate=0.00591]sofia/gateway/grnvoip/XXXX12148267711
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:638 Adding grnvoip_us to
>>>>>> head of list
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:314 Returning Dialstring
>>>>>>
>>>>>> [lcr_carrier=teliax,lcr_rate=0.01000]sofia/gateway/teliax_atl/12148267711
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:660 Adding teliax to end
>>>>>> of list
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:314 Returning Dialstring
>>>>>> [lcr_carrier=teliax,lcr_rate=0.01000]sofia/gateway/teliax/12148267711
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:660 Adding teliax to end
>>>>>> of list
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:314 Returning Dialstring
>>>>>>
>>>>>> [lcr_carrier=vitelity,lcr_rate=0.01440]sofia/gateway/vitelity/12148267711
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:660 Adding vitelity to
>>>>>> end of list
>>>>>> 2010-01-30 08:55:10.644013 [DEBUG] mod_lcr.c:314 Returning Dialstring
>>>>>>
>>>>>> [lcr_carrier=grnvoip_std,lcr_rate=0.01500]sofia/gateway/grnvoip/YYYY12148267711
>>>>>> [...]
>>>>>>
>>>>>> On Fri, Jan 29, 2010 at 10:42 PM, Mouncif Benniane <
>>>>>> mouncifbb at gmail.com> wrote:
>>>>>> > Also the Provider has presented the rates in this format?
>>>>>> > NPANXXLATA OCN INTER INTRA
>>>>>> >
>>>>>> >
>>>>>> > On Fri, Jan 29, 2010 at 11:30 PM, Mouncif Benniane <
>>>>>> mouncifbb at gmail.com>
>>>>>> > wrote:
>>>>>> >>
>>>>>> >> Tried it and it's not giving me intralata instead I get
>>>>>> interstate, does
>>>>>> >> the npa_nxx_company_ocn table needs to be used in this case?, also
>>>>>> do I have
>>>>>> >> to have the rate field in lcr table?
>>>>>> >>
>>>>>> >> lcr 617642 default 6176421212
>>>>>> >> | Digit Match | Carrier | Rate | Codec | CID Regexp |
>>>>>> Dialstring
>>>>>> >> |
>>>>>> >> | 617642 | carrier1 | 0.00500 | | |
>>>>>> >>
>>>>>> [lcr_carrier=carrier1,lcr_rate=0.00500]sofia/gateway/carrier1/1617642 |
>>>>>> >>
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:1329 data passed to
>>>>>> lcr is
>>>>>> >> [617642 default 6176421212]
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:1365 Set Caller ID to
>>>>>> >> [6176421212]
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:786 intra routing
>>>>>> [state:0
>>>>>> >> lata:0] so rate field is [rate]
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:802 we have an event
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:826 SQL: SELECT
>>>>>> l.digits,
>>>>>> >> c.carrier_name, l.rate, cg.prefix AS gw_prefix, cg.suffix AS
>>>>>> gw_suffix,
>>>>>> >> l.lead_strip, l.trail_strip, l.prefix, l.suffix , cg.codec , l.cid
>>>>>> FROM lcr
>>>>>> >> l JOIN carriers c ON l.carrier_id=c.id JOIN carrier_gateway cg ON
>>>>>> >> c.id=cg.carrier_id WHERE c.enabled = '1' AND cg.enabled = '1' AND
>>>>>> l.enabled
>>>>>> >> = '1' AND digits IN (617642, 61764, 6176, 617, 61, 6) AND
>>>>>> CURRENT_TIMESTAMP
>>>>>> >> BETWEEN date_start AND date_end ORDER BY digits DESC, rate,
>>>>>> rand();
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:307 Returning
>>>>>> Dialstring
>>>>>> >>
>>>>>> [lcr_carrier=carrier1,lcr_rate=0.00500]sofia/gateway/carrier1/1617642
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:615 Adding carrier1 to
>>>>>> head
>>>>>> >> of list
>>>>>> >> 2010-01-29 23:29:45.003307 [DEBUG] mod_lcr.c:307 Returning
>>>>>> Dialstring
>>>>>> >>
>>>>>> [lcr_carrier=carrier1,lcr_rate=0.00500]sofia/gateway/carrier1/1617642
>>>>>> >>
>>>>>> >> Thank you Rupa!
>>>>>> >>
>>>>>> >> On Fri, Jan 29, 2010 at 7:37 PM, Rupa Schomaker <rupa at rupa.com>
>>>>>> wrote:
>>>>>> >>>
>>>>>> >>> turn console logging up to debug and redo the lcr lookup. The sql
>>>>>> >>> statements along with status info will show up. This should give
>>>>>> >>> enough information to debug what is happening.
>>>>>> >>>
>>>>>> >>> I'm assuming the npanxx table is actually populated and not just
>>>>>> >>> existing?
>>>>>> >>>
>>>>>> >>> When doing the lookup from the cli you have to tell lcr what CID
>>>>>> to
>>>>>> >>> use (remember, it is relative to the src/dest number). I'm pretty
>>>>>> >>> sure you get something on the console log when you don't specify a
>>>>>> CID
>>>>>> >>> when using the commandline. Anyway:
>>>>>> >>>
>>>>>> >>> lcr 617642 default 6176421212
>>>>>> >>>
>>>>>> >>> should give you intralata.
>>>>>> >>>
>>>>>> >>> Note that the definition of intralata doesn't mean "local" for
>>>>>> some
>>>>>> >>> providers. Some providers define local to "same ratecenter" which
>>>>>> is
>>>>>> >>> even more restrictive.
>>>>>> >>>
>>>>>> >>> On Fri, Jan 29, 2010 at 4:43 PM, Mouncif Benniane <
>>>>>> mouncifbb at gmail.com>
>>>>>> >>> wrote:
>>>>>> >>> > i can't make use of mod_lcr using Intra/Interstate rating, I am
>>>>>> using
>>>>>> >>> > svn: FreeSWITCH Version 1.0.trunk (16517)
>>>>>> >>> >
>>>>>> >>> > lcr mysql table structure:
>>>>>> >>> > CREATE TABLE `lcr` (
>>>>>> >>> > `id` INT(11) NOT NULL AUTO_INCREMENT,
>>>>>> >>> > `digits` VARCHAR(15) DEFAULT NULL,
>>>>>> >>> > `rate` FLOAT(11,5) DEFAULT NULL,
>>>>>> >>> > `intrastate_rate` FLOAT(11,5) DEFAULT NULL,
>>>>>> >>> > `intralata_rate` FLOAT(11,5) DEFAULT NULL,
>>>>>> >>> > `carrier_id` INT(11) NOT NULL,
>>>>>> >>> > `lead_strip` INT(11) NOT NULL,
>>>>>> >>> > `trail_strip` INT(11) NOT NULL,
>>>>>> >>> > `prefix` VARCHAR(16) NOT NULL,
>>>>>> >>> > `suffix` VARCHAR(16) NOT NULL,
>>>>>> >>> > `lcr_profile` VARCHAR(32) DEFAULT NULL,
>>>>>> >>> > `date_start` DATETIME NOT NULL DEFAULT '1970-01-01 00:00:00',
>>>>>> >>> > `date_end` DATETIME NOT NULL DEFAULT '2030-12-31 00:00:00',
>>>>>> >>> > `quality` FLOAT(10,6) NOT NULL,
>>>>>> >>> > `reliability` FLOAT(10,6) NOT NULL,
>>>>>> >>> > `cid` VARCHAR(32) NOT NULL DEFAULT '',
>>>>>> >>> > `enabled` TINYINT(1) NOT NULL DEFAULT '1',
>>>>>> >>> > PRIMARY KEY (`id`),
>>>>>> >>> > KEY `carrier_id` (`carrier_id`),
>>>>>> >>> > KEY `digits` (`digits`),
>>>>>> >>> > KEY `lcr_profile` (`lcr_profile`),
>>>>>> >>> > KEY `digits_profile_cid_rate` USING BTREE (`digits`),
>>>>>> >>> > CONSTRAINT `carrier_id` FOREIGN KEY (`carrier_id`) REFERENCES
>>>>>> >>> > `carriers`
>>>>>> >>> > (`id`) ON DELETE CASCADE ON UPDATE CASCADE
>>>>>> >>> > ) ENGINE=INNODB AUTO_INCREMENT=6 DEFAULT CHARSET=latin1
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> > lcr_admin show profiles
>>>>>> >>> > Name: default
>>>>>> >>> > custom sql: SELECT l.digits, c.carrier_name,
>>>>>> l.${lcr_rate_field},
>>>>>> >>> > cg.prefix AS gw_prefix, cg.suffix AS gw_suffix, l.lead_strip,
>>>>>> >>> > l.trail_strip,
>>>>>> >>> > l.prefix, l.suffix , cg.codec , l.cid FROM lcr l JOIN carriers c
>>>>>> ON
>>>>>> >>> > l.carrier_id=c.id JOIN carrier_gateway cg ON c.id=cg.carrier_id
>>>>>> WHERE
>>>>>> >>> > c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1' AND
>>>>>> digits IN
>>>>>> >>> > (${lcr_query_expanded_digits}) AND CURRENT_TIMESTAMP BETWEEN
>>>>>> date_start
>>>>>> >>> > AND
>>>>>> >>> > date_end ORDER BY digits DESC, ${lcr_rate_field}, quality
>>>>>> DESC,
>>>>>> >>> > reliability DESC, rand();
>>>>>> >>> > has %: false
>>>>>> >>> > has vars: true
>>>>>> >>> > has intrastate: true
>>>>>> >>> > has intralata: true
>>>>>> >>> > has npanxx: true
>>>>>> >>> > Reorder rate: enabled
>>>>>> >>> > Info in headers: disabled
>>>>>> >>> > Quote IN() List: disabled
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> > lcr 617642 default returns rate from the rate field table and
>>>>>> not
>>>>>> >>> > intra/inter state fields rates.
>>>>>> >>> >
>>>>>> >>> > Any ideas? thanks!
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>> > _______________________________________________
>>>>>> >>> > FreeSWITCH-users mailing list
>>>>>> >>> > FreeSWITCH-users at lists.freeswitch.org
>>>>>> >>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> >>> >
>>>>>> >>> > UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> >>> > http://www.freeswitch.org
>>>>>> >>> >
>>>>>> >>> >
>>>>>> >>>
>>>>>> >>>
>>>>>> >>>
>>>>>> >>> --
>>>>>> >>> -Rupa
>>>>>> >>>
>>>>>> >>> _______________________________________________
>>>>>> >>> FreeSWITCH-users mailing list
>>>>>> >>> FreeSWITCH-users at lists.freeswitch.org
>>>>>> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> >>> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> >>> http://www.freeswitch.org
>>>>>> >>
>>>>>> >
>>>>>> >
>>>>>> > _______________________________________________
>>>>>> > FreeSWITCH-users mailing list
>>>>>> > FreeSWITCH-users at lists.freeswitch.org
>>>>>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> > UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> > http://www.freeswitch.org
>>>>>> >
>>>>>> >
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> -Rupa
>>>>>>
>>>>>> _______________________________________________
>>>>>> FreeSWITCH-users mailing list
>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> http://www.freeswitch.org
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> -Rupa
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>>
>> --
>> -Rupa
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
--
-Rupa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100131/de8657db/attachment-0002.html
More information about the FreeSWITCH-users
mailing list