[Freeswitch-users] Where can I set the IP address for Freeswitch to bind to?

[Brian West]

open up sip_profiles/*.xml and put the IP in there for rtp-ip and sip-ip

/b

On Jan 25, 2010, at 11:36 AM, vfclists wrote:

> 
> I have a rather complicated but necessary IP setup. 
> 
> I have a VPN running on the system, and some of the IP address a bridged
> with other network devices, and Freeswitch is not quite sure which one to
> bind to.
> 
> It has an IP for the local network, one for the VPN and one for the gateway,
> but it appears to bind to the gateway IP or the VPN when the VPN comes up. I
> want it bind to the local IP, and let the VPN do its normal stuff on the
> outbound,
> 
> I edited vars.xml and set local ip but it doesn't seem to be working.
> 
>  <X-PRE-PROCESS cmd="set" data="domain=192.168.1.41"/>
>  <X-PRE-PROCESS cmd="set" data="domain_name=$${domain}"/>
> 
> Is the vars.xml the right place to do it?
> 
> I take it that vars.xml is where you change stuff in the default settings?
> 
> Thanks
> 
> /vfclists