[Freeswitch-users] Need Help to setup freeswitch with sangoma card

Wed Jan 20 21:04:21 PST 2010

OpenZap is loading the ss7 signalling type. As per your concern openzap does
not know the details of the signalling then how it is loading the ss7_boost
libraries?

FreeSWITCH log:
-----------------------------
2010-01-21 10:10:46.707844 [INFO] zap_io.c:2374 Configured 30 channel(s)
2010-01-21 10:10:46.708600 [INFO] zap_io.c:2468 Loading SIG from
/usr/local/freeswitch/mod/ozmod_ss7_boost.so
2010-01-21 10:10:46.709031 [INFO] zap_io.c:2584 auto-loaded 'ss7_boost'
2010-01-21 10:10:46.709466 [DEBUG] ss7_boost_client.c:124 Creating L=
127.0.0.65:53000 R=127.0.0.66:53000
2010-01-21 10:10:46.709834 [DEBUG] ss7_boost_client.c:124 Creating L=
127.0.0.65:53001 R=127.0.0.66:53001
2010-01-21 10:10:46.710424 [WARNING] ss7_boost_client.c:244 TX EVENT (P):
SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0

The signalling type might be anything but when I used the oz list command it
showed the span details. But I am unable to make a inbound and outbound
call.

Outbound call result:
============
>  originate openzap/smg_prid/a/9940464753 openzap/smg_prid/a/9843171457
-ERR NORMAL_CIRCUIT_CONGESTION

2010-01-21 10:26:14.304816 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online.
freeswitch at internal> 2010-01-21 10:26:14.304816 [ERR] mod_openzap.c:1043 No
channels available
2010-01-21 10:26:14.304816 [ERR] switch_ivr_originate.c:1510 Cannot create
outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
2010-01-21 10:26:14.304816 [DEBUG] switch_ivr_originate.c:2138 Originate
Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]

Inbound call result:
-----------------------------

     I made incoming call for the dial plan which is specified in the
earlier post at that time it said the number is busy. We did the packet
capture using the following command.

wanpipemon -i w1g1 -pcap -pcap file isdn.pcap -port ISDN -full -systime -c
trd

Here I attached the pcap file for that.

Where I did mistake or Did I miss any thing to do?
Please help me.......

On Wed, Jan 20, 2010 at 7:40 PM, Thangappan.M <thangappan143 at gmail.com>wrote:

>
>       I noticed the 'oz list' output  in that span type is 'ss7 (boost)'.
> How can I change this to isdn?
>
>
>
> On Wed, Jan 20, 2010 at 12:43 PM, Thangappan.M <thangappan143 at gmail.com>wrote:
>
>> I found the error in it. The file name is used as openzap.conf.xml (
>> smg_prid is specified here) and another file name as openzap.conf.wiki.xml (
>> PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from
>> openzap.conf.wiki.xml  file.
>>
>> Now the another problem is raised here.
>> When I was using oz list command , the details of the smg_prid shown. When
>> I was using 'oz dump smg_prid' command it shows all the channels' details.
>> But all the channels' states are DOWN. why? How can I make it the states to
>> UP?
>>
>> When I was making the call , the number is busy message was get. The call
>> was not  at all landed to the freeswitch.
>>
>> Dial plan Example:
>> -------------------------------
>>  <extension name="PRI_Testing">
>>         <condition field="destination_number" expression="^39114600$">
>>                 <action application="playback"
>> data="ivr-welcome_to_freeswitch"/>
>>         </condition>
>>   </extension>
>>
>> Please help me...........
>>
>> *Output Reference:*
>> http://pastebin.org/79074
>>
>>
>> On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M <thangappan143 at gmail.com>wrote:
>>
>>> Dear all,
>>>
>>>          I have successfully configured wanpipe with freeswitch. When I
>>> was the running wancfg_fs script the following files openzap.conf ,
>>> autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf
>>> are created.
>>>
>>>          I started the wanrouter command then executed the freeswitch.
>>>          When I was executing freeswitch mod_openzap.c said the error as
>>> "Error  for finding the span id. name:PRI_1".
>>>          But in the openzap.conf and openzap.conf.xml files the span name
>>> is smg_prid.
>>>
>>>          Why the freeswitch is referring the span name as PRI_1 ?
>>>          Whether this has to configured in anywhere?
>>>
>>>          In the freeswitch CLI using oz command I tried to dump the PRI_1
>>> span id but it said te error  as "PRI_1 is not found".  When I was trying
>>> the command 'oz dump smg_prid'  all the channel states and details shown.
>>>
>>>         It seems that smg_prid span configured in openzap perfectly (Its
>>> my assumption). Then Why freeswitch is referring the span name as PRI_1.
>>>
>>> DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO?
>>>
>>> Could anyone please help me?
>>>
>>> REFERENCE:
>>>
>>> openzap.conf
>>> [span wanpipe smg_prid]
>>> name => smg_prid
>>> trunk_type =>e1
>>> b-channel => 1:1-15
>>> b-channel => 1:17-31
>>>
>>>
>>> openzap.conf.xml
>>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>>   <settings>
>>>     <param name="debug" value="0"/>
>>>     <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>>     <!--<param name="enable-analog-option" value="call-swap"/>-->
>>>     <!--<param name="enable-analog-option" value="3-way"/>-->
>>>   </settings>
>>>   <boost_spans>
>>>         <span id="smg_prid">
>>>         <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>>         <param name="dialplan" value="XML"/>
>>>         <param name="context" value="default"/>
>>>          <!-- regex to stop dialing when it matches -->
>>>         <!--<param name="dial-regex" value="5555"/>-->
>>>         <!-- regex to stop dialing when it does not match -->
>>>         <!--<param name="fail-dial-regex" value="^5"/>-->
>>>         </span>
>>>  </boost_spans>
>>>  <analog_spans>
>>>  </analog_spans>
>>> </configuration>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Regards,
>>> Thangappan.M
>>>
>>
>>
>>
>> --
>> Regards,
>> Thangappan.M
>>
>
>
>
> --
> Regards,
> Thangappan.M
>

-- 
Regards,
Thangappan.M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100121/568aef65/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: isdn.pcap
Type: application/cap
Size: 217 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100121/568aef65/attachment-0002.bin 