[Freeswitch-users] Need Help to setup freeswitch with sangoma card

[Thangappan.M]

      I noticed the 'oz list' output  in that span type is 'ss7 (boost)'.
How can I change this to isdn?


On Wed, Jan 20, 2010 at 12:43 PM, Thangappan.M <thangappan143 at gmail.com>wrote:

> I found the error in it. The file name is used as openzap.conf.xml (
> smg_prid is specified here) and another file name as openzap.conf.wiki.xml (
> PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from
> openzap.conf.wiki.xml  file.
>
> Now the another problem is raised here.
> When I was using oz list command , the details of the smg_prid shown. When
> I was using 'oz dump smg_prid' command it shows all the channels' details.
> But all the channels' states are DOWN. why? How can I make it the states to
> UP?
>
> When I was making the call , the number is busy message was get. The call
> was not  at all landed to the freeswitch.
>
> Dial plan Example:
> -------------------------------
>  <extension name="PRI_Testing">
>         <condition field="destination_number" expression="^39114600$">
>                 <action application="playback"
> data="ivr-welcome_to_freeswitch"/>
>         </condition>
>   </extension>
>
> Please help me...........
>
> *Output Reference:*
> http://pastebin.org/79074
>
>
> On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M <thangappan143 at gmail.com>wrote:
>
>> Dear all,
>>
>>          I have successfully configured wanpipe with freeswitch. When I
>> was the running wancfg_fs script the following files openzap.conf ,
>> autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf
>> are created.
>>
>>          I started the wanrouter command then executed the freeswitch.
>>          When I was executing freeswitch mod_openzap.c said the error as
>> "Error  for finding the span id. name:PRI_1".
>>          But in the openzap.conf and openzap.conf.xml files the span name
>> is smg_prid.
>>
>>          Why the freeswitch is referring the span name as PRI_1 ?
>>          Whether this has to configured in anywhere?
>>
>>          In the freeswitch CLI using oz command I tried to dump the PRI_1
>> span id but it said te error  as "PRI_1 is not found".  When I was trying
>> the command 'oz dump smg_prid'  all the channel states and details shown.
>>
>>         It seems that smg_prid span configured in openzap perfectly (Its
>> my assumption). Then Why freeswitch is referring the span name as PRI_1.
>>
>> DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO?
>>
>> Could anyone please help me?
>>
>> REFERENCE:
>>
>> openzap.conf
>> [span wanpipe smg_prid]
>> name => smg_prid
>> trunk_type =>e1
>> b-channel => 1:1-15
>> b-channel => 1:17-31
>>
>>
>> openzap.conf.xml
>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>   <settings>
>>     <param name="debug" value="0"/>
>>     <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>     <!--<param name="enable-analog-option" value="call-swap"/>-->
>>     <!--<param name="enable-analog-option" value="3-way"/>-->
>>   </settings>
>>   <boost_spans>
>>         <span id="smg_prid">
>>         <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>         <param name="dialplan" value="XML"/>
>>         <param name="context" value="default"/>
>>          <!-- regex to stop dialing when it matches -->
>>         <!--<param name="dial-regex" value="5555"/>-->
>>         <!-- regex to stop dialing when it does not match -->
>>         <!--<param name="fail-dial-regex" value="^5"/>-->
>>         </span>
>>  </boost_spans>
>>  <analog_spans>
>>  </analog_spans>
>> </configuration>
>>
>>
>>
>>
>>
>>
>> --
>> Regards,
>> Thangappan.M
>>
>
>
>
> --
> Regards,
> Thangappan.M
>



-- 
Regards,
Thangappan.M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100120/3ea014ef/attachment-0002.html