[Freeswitch-users] Sangoma PRI installation for FreeSWITCH

[lakshmanan ganapathy]

Thanks Jerry, for making the wancfg_fs configuration available.

On Wed, Jan 13, 2010 at 9:45 PM, Jerry Richards
<jerry.richards at teotech.com>wrote:

>  Here are my instructions to install the wanpipe driver and I have not had
> your problem:
>
>
> 1)       Download the following Wanpipe driver tarball
> wanpipe-<version>.tgz
>
> 2)       Store the wanpipe-<version>.tgz file in the /opt folder.
>
> 3)       tar xvfz wanpipe-<version>.tgz
>
> 4)       cd wanpipe-<version>
>
> 5)       make openzap
>
> 6)       make install
>
> 7)       make install_pri
>
> 8)       wanrouter hwprobe     // confirms successful wanpipe installation
>
> 9)       /usr/sbin/wancfg_fs   // starts wanpipe configuration utility
>
> 10)   1=NO            // Change Freeswitch Configuration Directory
>
> 11)   1=T1            // Select Media Type
>
> 12)   1=YES (keep)    // Configure Port 1 T1, B8ZS, ESF
>
> 13)   1=NORMAL        // Select Clock
>
> 14)   1=NATIONAL      // Select Switchtype
>
> 15)   1=CPE           // Select Signaling Type
>
> 16)   1               // Input Group #
>
> 17)   1=YES           // Enable H/W DTMF Detect
>
> 18)   1=YES           // Enable FAX Detect
>
> 19)   1=YES=CONTINUE  // Configuration Complete
>
> 20)   1=YES           // Save Configuration
>
> 21)   1=YES           // Wanrouter start on reboot
>
> 22)   1=YES           // smg_ctrl start/stop on wanrouter start
>
> 23)   Done.
>
> Jerry
>
>  ------------------------------
> *From:* Magesh R [mailto:magesh.freeswitch at gmail.com]
> *Sent:* Tuesday, January 12, 2010 8:21 PM
> *To:* freeswitch-users at lists.freeswitch.org
> *Subject:* [Freeswitch-users] Sangoma PRI installation for FreeSWITCH
>
> Dear All,
>          I have installed Sangoma PRI card in machine with following steps,
>                  * wget
> ftp://ftp.sangoma.com/linux/custom/3.5/wanpipe-3.5.8.7.tgz
>                  * tar -xvfz wanpipe-3.5.8.7.tgz
>                  * cd wanpipe-3.5.8.7
>                  * make openzap
>                  * make install
>                  * make install_pri
>
>            I have executed "wanrouter hwprobe" command it prints the
> following details,
>
>            1 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=1 :
> HWEC=0 : V=36
>            2 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=2 :
> HWEC=0 : V=36
>
>         Card Cnt: A101-2=1
>
>        Next I have executed wancfg_fs script to configure the sangoma for
> freeswitch.
> It creates the following configuration files
>                      * wanpipe1.conf
>                      * wanpipe2.conf
>                      * smg_prid.conf
>                      * openzap.conf
>                      * openzap.conf.xml
>        I have attached those files.
>        I have started the wanrouter and printed the wanrouter status,
>               Wanrouter Status:
>
> Device name | Protocol | Station | Status        |
> wanpipe1    | AFT TE1  | N/A     | Connected     |
> wanpipe2    | AFT TE1  | N/A     | Disconnected  |
>
>
>       Next I have started the smg_ctrl, but it failed to start. It prints
> the following things,
> smg_ctrl start
>
> Starting processes...
> Loading SCTP...OK
> Starting sangoma_prid...OK
> sangoma_prid failed to start
> check /var/log/sangoma_mgd.log for errors
>
> Stopping running processes...
> safe_sangoma not running...
> sangoma_prid is stopped
> Removing PID files...done
>
> I have checked /var/log/sangoma_mgd.log file. But nothing was there.
>
> Could any please tell me where I made mistake?
>
> Thanks,
> Mag
>
>
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100114/4e3abba5/attachment-0002.html