[Freeswitch-users] No audio after Remote SDP:

[Mark Campbell-Smith]

Hi!

Both are auto-nat:
    <param name="ext-rtp-ip" value="auto-nat"/>
    <param name="ext-sip-ip" value="auto-nat"/>

FreeSWITCH Version 1.0.trunk (15490)

However, isn't it the IP address that is reported by the remote
SPA3102 that is incorrect?  Or?

On Thu, Dec 31, 2009 at 7:21 AM, Brian West <brian at freeswitch.org> wrote:
> show me the ext-rtp-ip and ext-sip-ip settings you're using along with SVN rev please.
>
> /b
>
> On Dec 30, 2009, at 2:13 PM, Mark Campbell-Smith wrote:
>
>> Hi Anthony,
>>
>> The only profiles I have defined are external and internal.   These
>> should be using internal...
>>
>> 192.168.1.120 is the FS box, which is NAT'd.  Never had any problems
>> with this being NAT'd though
>> 192.168.1.121 is a PAP2 ATA connected to FS
>>
>> I don't use proxy media.
>>
>> I am trying to call an SPA3102, which is on the internet and NAT'd
>> (external IP address 11.11.11.11 in the trace and internal/private ip
>> address of 192.168.1.3).
>>
>> Thanks!
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>