[Freeswitch-users] Announcement: FreeSWITCH Add Broadsoft SCA Support

[Michael Jerris]

If this issue is not already on jira could you please make sure it  
gets added?

Mike

On Feb 19, 2010, at 12:54 AM, Yehavi Bourvine  
<yehavi.bourvine at gmail.com> wrote:

> Hello Gabe,
>
>   As you can see - Brian is actively investigating it, so you can  
> expect for some fix soon...
>
>                        Regards, __Yehavi:
>
> 2010/2/19 Gabriel Kuri <gkuri at ieee.org>
> >  When a call arrives, both ring; the one that did not answer gets  
> only a
> > cancel mesage without any further notification that the extension  
> is in use
> > by the other phone.
>
> These are the same exact symptoms I posted about earlier this week,
> with the Cisco SPA-5xx series phones. I still have yet to figure out
> why this is happening, if you find out what's going on, please post
> back the solution, I'd like to know the resolution.
>
> Thanks,
> Gabe
>
>
>
> On Thu, Feb 18, 2010 at 9:01 PM, Yehavi Bourvine
> <yehavi.bourvine at gmail.com> wrote:
> > Thanks Brian. It now works better, but not fully (using 16659M).
> >
> > What happens is:
> >
> > When one of the Polycoms seize the line it is ok - the other phone  
> gets
> > notification and the extension status is "in use".
> > When one of the Polycom phones initiates a call - all is ok:
> >
> > The other side sees that the extension is in use.
> > When it is put to hold all phones who share this extension see it  
> and can
> > pick the call.
> >
>
> >
> >                          Thanks! __Yehavi:
> >
> > 2010/2/17 Brian West <brian at freeswitch.org>
> >>
> >> Step 1. Enable manage-shared-appearance=true
> >>
> >> Step 2. Now in the phone's config Configure the phone as usually,  
> set the
> >> line shared and DO NOT set the third party name.
> >>
> >> Step 3. Reboot
> >>
> >> It should work.
> >>
> >> I wish someone that has this working would write some wiki docs  
> these
> >> threads about it not working are getting rather old when I know  
> for a fact
> >> they work fine.
> >>
> >> The gateway info missing is a gateway you have configured getting a
> >> notify.  It has nothing to do with SCA.
> >>
> >> /b
> >>
> >> On Feb 17, 2010, at 9:00 AM, Yehavi Bourvine wrote:
> >>
> >> > .
> >>
> >>
> >> _______________________________________________
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ 
> freeswitch-users
> >> http://www.freeswitch.org
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- 
> users
> > http://www.freeswitch.org
> >
> >
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- 
> users
> http://www.freeswitch.org
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- 
> users
> http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100219/4c863452/attachment-0002.html