[Freeswitch-users] One more thing..

[Doc]

I will update the software and report back.  It it good to know that you 
think in "1 minute increments" - I figured mine was not too outdated 
;-)   -Thanks,

Anthony Minessale wrote:
> keep updating, the maintainer of mod_skypeiax is adding new patches 
> every few hours.
> You can also join irc on irc.freenode.net <http://irc.freenode.net> 
> #freeswitch and #freeswitch-dev to interact with him live.
>
>
> One hint around here when we ask if you updated we work in 1 minute 
> increments.
>
>
>
> On Wed, Feb 17, 2010 at 11:56 AM, Doc <ledoktre at meanie.us 
> <mailto:ledoktre at meanie.us>> wrote:
>
>     I did try changing the rtp time in my Sipura (advanced, sip, RTP
>     Packet
>     Size) from 0.030 to 0.020, and the error went away.  I was able to
>     then
>     test (and succeed) dialing from secondary skype user to skypiax, and
>     have the call bridged automatically to one of my Sipura SPA-1001's.  I
>     could speak into the phone, and hear it come through skype (on my
>     laptop) no problem.  When I would talk on the laptop, I would get
>     garble
>     back on the phone, but that could be a sound issue on my laptop (my
>     skype sometimes does this with Pulse audio on my laptop, Ubuntu
>     Karmic).
>
>     The interesting thing it did do, however, was eventually (within a
>     minute?) It threw a couple of errors :
>
>     2010-02-17 11:47:34.007909 [ERR] mod_skypiax.c:826 rev
>     16619M[(nil)|37     ][ERRORA  826  ][interface1][-1, 5,21] EXIT?
>     sent=-1
>     2010-02-17 11:47:34.027776 [ERR] mod_skypiax.c:826 rev
>     16619M[(nil)|37     ][ERRORA  826  ][interface1][-1, 5,21] EXIT?
>     sent=-1
>     2010-02-17 11:47:34.047643 [ERR] mod_skypiax.c:826 rev
>     16619M[(nil)|37     ][ERRORA  826  ][interface1][-1, 5,21] EXIT?
>     sent=-1
>
>     And on a subsequent test, I received no audio (the above error rolling
>     on the console), and within a matter of seconds, FS crashed with
>     this :
>
>     Segmentation fault (core dumped)
>
>     I have another request open on the group actually for the above error,
>     so I think it'd make sense to discuss further there (rather than
>     duplicating material).
>
>     Thanks!  At any rate, the error for the missing codec, etc, seemed
>     to be
>     gone once I updated the RTP time in my ATA.  Hope this helps someone!!
>
>     Brian West wrote:
>     > change the rtp time to 0.020 from 0.030
>     >
>     > /b
>
>     _______________________________________________
>     FreeSWITCH-users mailing list
>     FreeSWITCH-users at lists.freeswitch.org
>     <mailto:FreeSWITCH-users at lists.freeswitch.org>
>     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>     UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>     http://www.freeswitch.org
>
>
>
>
> -- 
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
> Twitter: http://twitter.com/FreeSWITCH_wire
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com 
> <mailto:MSN%3Aanthony_minessale at hotmail.com>
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com 
> <mailto:PAYPAL%3Aanthony.minessale at gmail.com>
> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org 
> <mailto:sip%3A888 at conference.freeswitch.org>
> iax:guest at conference.freeswitch.org/888 
> <http://iax:guest@conference.freeswitch.org/888>
> googletalk:conf+888 at conference.freeswitch.org 
> <mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
> pstn:+19193869900
> ------------------------------------------------------------------------
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>