[Freeswitch-users] drops calls in the first 60 seconds

[Aloysius Lloyd]

Thanks Brian,

1. Phone side port - I will give a try.

2. rport - already enabled.

Thanks
Lloyd


On Thu, Dec 9, 2010 at 1:43 PM, Brian West <brian at freeswitch.org> wrote:

> First off you need to change the phone side port.. you can not have two
> phones on the same port behind the same nat... secondly enable rport on the
> phone's config.
>
> /b
>
> On Dec 9, 2010, at 12:39 PM, Aloysius Lloyd wrote:
>
> Chris,
>
> I just switch the customer from Asterisk to FreeSWITCH. The same DD-WRT
> firmware run smoothly for a long time with the Asterisk.I do not think
> there is no issue with DD-WRT firmware. I am thinking the Aastra phone.
>
> Because of calls Drop , I do not want to switch the router which is working
> fine. In your case Asterisk/ FreeeSWITCH in the same network. My case
> FreeSWITCH in the Data center( Public Network) , Phones behind the NAT
>
> I work from my home and I use the same DD-WRT firmware to connect same
> FreeSWITCH, but using Linksys SPA942 phone. Never have any problem.
>
> Victor,
>
> Thank you for the suggestion. I am going to capture and analyse.
>
>
> My question is Does anyone have similar experience with Aastra Phones &
> FreeSWITCH.
>
> Thanks
> Lloyd
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101209/0af3a047/attachment.html