[Freeswitch-users] Sangoma D100 usage

[David Ponzone]

Javier,

as Sangoma is working quite closely with FreeSWITCH devs (some Sangoma people are actually on this ML), I am pretty sure you can ask Sangoma support to help you out.

David Ponzone  Direction Technique
email: david.ponzone at ipeva.fr
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26
www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 02/12/2010 à 13:55, Javier Gallart a écrit :

> Hello
> 
> we got a Sangoma D100 transcoding card, and we like to get it working with our freeswitch. Freeswitch and the Sangoma card are running on the same server. The module is properly loaded:
> 
>  2010-12-02 07:46:33.393953 [DEBUG] mod_sangoma_codec.c:1102 Reading sangoma codec configuration
> 2010-12-02 07:46:33.393953 [DEBUG] mod_sangoma_codec.c:1126 Found Sangoma RTP IP x.x.x.x
> 2010-12-02 07:46:33.393953 [NOTICE] mod_sangoma_codec.c:1193 Detected 1 and activated 1 Sangoma codec vocallo modules
> 2010-12-02 07:46:33.393953 [DEBUG] mod_sangoma_codec.c:1207 Loading codecs, register='all', noregister=''
> 2010-12-02 07:46:33.393953 [DEBUG] mod_sangoma_codec.c:1239 Registering implementations for codec PCMU
> ...
> 2010-12-02 07:46:33.394951 [DEBUG] mod_sangoma_codec.c:1239 Registering implementations for codec PCMA
> ...
> 2010-12-02 07:46:33.394951 [DEBUG] mod_sangoma_codec.c:1239 Registering implementations for codec G729
> ...
> 2010-12-02 07:46:33.402964 [CONSOLE] switch_loadable_module.c:946 Successfully Loaded [mod_sangoma_codec]
> 2010-12-02 07:46:33.402964 [NOTICE] switch_loadable_module.c:185 Adding Codec PCMU 0 Sangoma PCMU 8000hz 10ms 64000bps
> ...
> 2010-12-02 07:46:33.402964 [NOTICE] switch_loadable_module.c:185 Adding Codec PCMA 8 Sangoma PCMA 8000hz 20ms 64000bps
> ...
> 2010-12-02 07:46:33.402964 [NOTICE] switch_loadable_module.c:185 Adding Codec G729 18 Sangoma G729 8000hz 40ms 8000bps
> ...
> 2010-12-02 07:46:33.403967 [NOTICE] switch_loadable_module.c:274 Adding API Function 'sangoma_codec'
> 
> The codecs look also good:
> freeswitch at internal> show codecs
> codec,Sangoma G723,mod_sangoma_codec
> codec,Sangoma G729,mod_sangoma_codec
> codec,Sangoma GSM,mod_sangoma_codec
> codec,Sangoma PCMA,mod_sangoma_codec
> codec,Sangoma PCMU,mod_sangoma_codec
> 
> What we don't know is how to actually use the card. We have forced a call with g729 in the A-leg and g711 in the b-leg but freeswitch doesn't know how to bridge them. I've tried unsuccessfully this config in the vars.xml:
> <X-PRE-PROCESS cmd="set" data="global_codec_prefs=Sangoma G729,Sangoma PCMU,Sangoma PCMA"/>
> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=Sangoma PCMU,Sangoma PCMA"/>
> 
> Does anybody has any experience usgin this card?
> 
> Thanks
> 
> Javier
> 
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101202/4c8e0458/attachment.html