[Freeswitch-users] No audio for 3 seconds on some calls
Ash
ash at archerdrive.com
Fri Aug 6 07:57:43 PDT 2010
I think I may have solved my own problem... I am running on Ubuntu (I know its not recommended) and my kernel timer was set to 100hz. Running time_test 1000 1000 it would avg from 997 to 1300 when I kept running it. I have now set the kernel to be 1000hz and it now avg around 1008-1014 on multiple tests.
Unfortunately its not one of those always happens issues so I will have to see how it goes.
On 06/08/2010, at 6:38 PM, Ash wrote:
> Hi All,
>
> I am running freeswitch 1.0.6 and some users have reported that they will be on a call and the audio will go silent for 3 seconds. This doesn't appear to be happening to all users. So far, I have done the following:
>
> - Internal and External profiles set <param name="rtp-autofix-timing" value="false" /> ( I was getting the RTP warning about ptime being 30 and all phones are set to 20ms)
> - Set the phone to use PCMA and made sure its PCMA through to the provider
> - We have installed a SIP Proxy at the other location so the voip phones all go via the SIP Proxy as we thought it might be a NAT issue.
> - Disabled VAD and CNG on the phone
> - The remote phones are connected via a DSL service but this appears to be rock solid and averages response times between 10ms and 40ms.
>
> I thought it might be something with VAD, is VAD disabled by default or should I add to the internal and external profiles
> <param name="vad" value="none"/ >
>
>
> Has anyone else come across something like this before? Maybe some other ways I can investigate what is going wrong?
>
> Any help would be much appreciated.
>
> Ash.
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
More information about the FreeSWITCH-users
mailing list