[Freeswitch-users] Any breaking change on register with 1.0.6

[Phillip Jones]

Thanks for the reply Mike.

Anthony gave me the heads up on irc that NAT head been simplified in 1.0.6 -
so I looked at the cnf file.

# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "71.xxx.60.xxx"
voip_control_port: "5900"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "0"

Setting nat_received_processing: "1" did  the trick and the Cisco phone is
now registering correctly again.

Cheers

On Sat, Apr 24, 2010 at 3:23 PM, Michael Jerris <mike at jerris.com> wrote:

> can you provide any logs of the failure?
>
> On Apr 23, 2010, at 1:55 PM, Phillip Jones wrote:
>
> > Hi there,
> >
> > I have been using my Cisco phones registered with FreeSWITCH (1.0.4) for
> months now. Today I upgraded to 1.0.6 and they no longer registers.
> >
> > This what configured to get them to work.
> >
> > 1) Add
> >
> >  <list name="lan" default="allow">
> >         <node type="allow" cidr="71.**5.60.***/32"/>
> >
> > to acl.conf.xml
> >
> > 2) Add the appropriate directory entry.
> >
> >
> > That worked (may be it shouldn't have done) - but on 1.0.6 (today's
> trunk) is fails.
> >
> > Is something else required in 1.0.6 do you know?
> >
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100426/3f3f7587/attachment.html