[Freeswitch-users] FreeSwitch 1.0.6 - Core Dumped with libpri

[lakshmanan ganapathy]

I tried to analyze the core dump and got the following.

gdb ./freeswitch core.28775

warning: Can't read pathname for load map: Input/output error.
Reading symbols from /lib/i686/cmov/libm.so.6...done.
Loaded symbols for /lib/i686/cmov/libm.so.6
Reading symbols from /usr/local/freeswitch/lib/libfreeswitch.so.1...done.
Loaded symbols for /usr/local/freeswitch/lib/libfreeswitch.so.1
Reading symbols from /lib/i686/cmov/librt.so.1...done.
Loaded symbols for /lib/i686/cmov/librt.so.1
Reading symbols from /lib/i686/cmov/libdl.so.2...done.
Loaded symbols for /lib/i686/cmov/libdl.so.2
Reading symbols from /lib/i686/cmov/libcrypt.so.1...done.
Loaded symbols for /lib/i686/cmov/libcrypt.so.1
Reading symbols from /lib/i686/cmov/libpthread.so.0...done.
Loaded symbols for /lib/i686/cmov/libpthread.so.0
Reading symbols from /lib/libncurses.so.5...done.
Loaded symbols for /lib/libncurses.so.5
Reading symbols from /lib/i686/cmov/libc.so.6...done.
Loaded symbols for /lib/i686/cmov/libc.so.6
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /usr/lib/libstdc++.so.6...done.
Loaded symbols for /usr/lib/libstdc++.so.6
Reading symbols from /lib/libgcc_s.so.1...done.
Loaded symbols for /lib/libgcc_s.so.1
Reading symbols from /usr/local/freeswitch/mod/mod_console.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_console.so
Reading symbols from /usr/local/freeswitch/mod/mod_logfile.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_logfile.so
Reading symbols from /usr/local/freeswitch/mod/mod_enum.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_enum.so
Reading symbols from /usr/local/freeswitch/mod/mod_cdr_csv.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_cdr_csv.so
Reading symbols from /usr/local/freeswitch/mod/mod_event_socket.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_event_socket.so
Reading symbols from /usr/local/freeswitch/mod/mod_sofia.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_sofia.so
Reading symbols from /usr/local/freeswitch/mod/mod_loopback.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_loopback.so
Reading symbols from /usr/local/freeswitch/mod/mod_openzap.so...done.
Loaded symbols for /usr/local/freeswitch/mod/mod_openzap.so
Reading symbols from /usr/local/freeswitch/lib/libopenzap.so.1...done.
Loaded symbols for /usr/local/freeswitch/lib/libopenzap.so.1
Reading symbols from /usr/local/freeswitch/mod/ozmod_wanpipe.so...done.
Loaded symbols for /usr/local/freeswitch/mod/ozmod_wanpipe.so
Reading symbols from /usr/lib/libsangoma.so.3...done.
Loaded symbols for /usr/lib/libsangoma.so.3
Reading symbols from /usr/local/freeswitch/mod/ozmod_libpri.so...done.
Loaded symbols for /usr/local/freeswitch/mod/ozmod_libpri.so
Reading symbols from /usr/lib/libpri.so.1.4...done.
Loaded symbols for /usr/lib/libpri.so.1.4
Core was generated by `./freeswitch'.
Program terminated with signal 11, Segmentation fault.
[New process 28795]
[New process 28775]
[New process 28794]
[New process 28793]
[New process 28792]
[New process 28791]
[New process 28790]
[New process 28789]
[New process 28788]
[New process 28787]
[New process 28786]
[New process 28785]
[New process 28784]
[New process 28781]
[New process 28780]
[New process 28779]
[New process 28778]
[New process 28777]
[New process 28776]
#0  0xb6f08ee5 in lpwrap_init_pri (spri=0x9fdb8a0, span=0x9e7cb38,
dchan=0x0, swtype=5,
    node=2, debug=0) at src/ozmod/ozmod_libpri/lpwrap_pri.c:180
180             if ((spri->pri = pri_new_cb(spri->dchan->sockfd, node,
swtype, __pri_lpwrap_read, __pri_lpwrap_write, spri))){

On Thu, Apr 15, 2010 at 4:41 PM, lakshmanan ganapathy
<lakindia89 at gmail.com>wrote:

> Hi all,
> I have downloaded the latest freeswitch 1.0.6.
> I configured my sangoma card with libpri as told in
>                 http://wiki.freeswitch.org/wiki/Openzap.sangoma.libpri
> I use wanpipe-3.5.10.10 and libpri-1.4.10.2.
>
> openzap.conf
> [span wanpipe PRI_1]
> name => OpenZAP
> number => 1
> trunk_type => e1
> b-channel => 1:1-15
> b-channel => 1:17-31
> [span wanpipe PRI_2]
> name => OpenZAP
> number => 2
> trunk_type => e1
> b-channel => 2:1-15
> b-channel => 2:17-31
>
> openzap.conf.xml:
> <configuration name="openzap.conf" description="OpenZAP Configuration">
> <settings>
> <param name="debug" value="1"/>
> </settings>
> <libpri_spans>
> <span name="PRI_1">
> <param name="node" value="cpe"/>
> <param name="switch" value="euroisdn"/>
> <param name="dialplan" value="XML"/>
> <param name="context" value="public"/>
> <param name="l1" value="alaw"/>
> </span>
> <span name="PRI_2">
> <param name="node" value="net"/>
> <param name="switch" value="euroisdn"/>
> <param name="dialplan" value="XML"/>
> <param name="context" value="public"/>
> <param name="l1" value="alaw"/>
> </span>
> </libpri_spans>
> </configuration>
>
> I started wanrouter and after that I started freeswitch.
> I got core dumped immediately after saying auto-loaded libpri.
> Here is the freeswitch log.
>
> http://pastebin.freeswitch.org/12712
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100415/a3f14e03/attachment-0001.html